Your cart is empty.
Your cart is empty.Product Description
Elevate Surface Treatment with Precision Sandblasting !
Choose VEVOR 5-gallon sandblaster and experience a simpler, more efficient, and precise surface treatment. It enables high-pressure surface treatment, effortlessly removing rust, paint, stain and polishing large areas, also performing perfect sandblasting for curved surfaces and gaps.
Our sand blaster is equipped with an oil-water separator that effectively filters moisture to keep the abrasive dry, preventing wet media from clogging the valve and ensuring smooth sandblasting.
You'll get a flexible aluminum sandblasting gun that is not only lightweight but also allows for precise control with just one hand.
Our ceramic nozzles are wear-resistant, heat-resistant, and resistant to deformation, preventing abrasive clogs caused by nozzle deformation. Available in 4 sizes: 3/32", 7/64", 1/8", 9/64" (Pre-Installed), these ceramic nozzles ensure stable sandblasting performance.
Rubber wheels and wide handle make it easy to move, especially suitable for large-area continuous work. With a 8ft rubber hose, it can easily reach hard-to-access areas. The bottom support provides high stability, allowing to complete sandblasting tasks with ease.
S. Barnes
Reviewed in the United States on February 24, 2025
This class of blasters has come way down in price over the last few decades. I've used pro-grade pressure pots with 175 cfm gas compressors....this home hobbyist rig will take a lot longer than a pro rig, but it WILL get the job done. You should have at least 15 CFM air with this rig (3hp motor or more). You can run with smaller compressors but the workspeed will be tediously slow. This blaster comes with 2mm, 2.5mm, 3mm and 3.5 mm ceramic nozzles. The 3.5 is mounted on the deadman gun right out of the box. Use FINE grits (or extra fine) with the 3.5 or you will spend more time unclogging the nozzle than actually blasting. The grit you use must be bone dry-clumpy grit is a no no. I use fine grit crushed glass from Northern Tool. The two smallest nozzles...wow, you'd need super fine grit to work with the smaller nozzles without clogging.
Chance Bittinger
Reviewed in the United States on February 10, 2025
Make sure you only use the red bag of black diamond (fine grit) from Tractor Supply. I found that literally every other media clogged the gun or the ball valve on the bottom. I tried strained sand, black diamond black back (medium grit), fine grit pulverized glass, etc.. the only media I didn’t try was the stuff harbor freight sells. But that’s pretty pricey. The red bag of black diamond is like $12.00 at my local tractor supply, and that’s 50lbs. Once you get it working it actually works great!
déçu
Reviewed in France on January 8, 2025
j’ai acheté cette sableuse pour mon compagnon, il en avait besoin car il est entrain de refaire un kart cross, et il en est satisfait à 100%vous pouvez le commande les yeux fermer
Cliente
Reviewed in Spain on January 30, 2025
Equipó de chorreo con arena funcional aunque se hecha de menos boquillas de mayor diámetro ,con las que trae ,obliga al uso de arena extrafina ,y tamizada, si no se atasca
Bibi
Reviewed in France on January 28, 2025
Bonjour, sableuse reçu aujourd’hui. Montage facile manque l’entonnoir pour le remplissage. Je vais effectuer une réclamation pour celui-ci.
Lemanissier
Reviewed in France on January 23, 2025
fonctionne parfaitement , arrivée pré-monté sans fuite , prévoir un raccord rapide , consommer 4 sacs pour 25m2
Mat
Reviewed in the United States on January 1, 2025
It does work, value for money
Rodrigo
Reviewed in the United States on July 8, 2024
Excelente producto
Michael O'Neil
Reviewed in the United States on March 9, 2024
First, I cannot load the images I have taken.I set this up and immediately it was apparent the manual does not coordinate well with the unit. Putting the combination cart/wheels/handle on the unit was trial and error. There actually is a right/left "leg" only discovered by trial and error.Time to clean some peeling/oxidized aluminum outdoor lights from our church.Once assembled, I loaded fresh, dry, fine media. In my case it is coal slag. I got the unit up to 90psi, opened the valve and it flowed, literally blowing everywhere but not able to actually do any work of stripping/cleaning. I got online, I read the "manual" and tried to make adjustments. Thats when everything stopped working. I had a high volume of air, like a compressor but no media. I shook the can. I added media. I opened and closed the ball valve. I changed tips. Nothing worked.Lots of advice points to clogs. So, I started taking things apart. First the home and nozzle. Clean.I opened the ball valve and nothing. I opened and closed the valve, nothing. So, I figured, its threaded stuff, lets take it apart. The manual even talks about replacing parts (at sometime in the future - not the first day). Well, that's when this became a pile of metal.kThe "brass" is so soft and it is "glued" with some type of "lock - tite" material that the valve and components are distorted, and now not replaceable. Guess what, this all must be metric because the big box stores don't have similar size or threading. Worse, a similar unit is at Harbor Freight but they don't carry the same fittings as on the VEVOR.I'm going to try and communicate with VEVOR and hope to get replacement parts. So far, this is a waste of money and several hours of my time.
Michelle Ramirez
Reviewed in the United States on December 29, 2024
Works great! Good buy!
john massaro jr
Reviewed in Canada on October 29, 2024
great work well
Kelley Sims
Reviewed in the United States on April 11, 2024
ALL INN 1, USED FOR CLEAN OLD DUTCH OVENS...
Gpacook
Reviewed in the United States on November 1, 2022
First, I’ll admit I’m not experienced with a pressure pot. But when I received this one, I followed instructions, put in about 10 lb 180 grit aluminum oxide from a freshly opened bag, and charged tank to 40 psi. That’s the range of pressure I will use for blasting. My compressor is 110 vac 5 gal, 3 hp, 6.5 cfm i @ 90 psi, 6.9 cfm @ 40 psi.When I try to blast, abrasive that has already dropped to the mixing valve shoots out ok, but then stops until I knock on or shake the tank - which caused more abrasive to shoot out.Unless I’m doing something wrong, I feel this product is letting me down. If I learn differently I will upgrade my ranking.I gave it two stars because it seems to be structurally solid.
Recommended Products
$22.95
$ 10 .99 $10.99