Your cart is empty.
Your cart is empty.Product Description
Description
Specification
- Lead Cutting Angle: 95 Degree
- Direction: Right Hand
- Carbide Inserts: CCMT0602
- Clear mark on the wrench, easy to identify bar holder
VerRich 3pcs Boring Bars Turning Tools Holder Set
Lathe Turning Tools with 10pcs CCMT0602 Carbide Inserts + 3 Pcs Wrench
Material :High quality Steel Durable for Long Time Use: Imported main part, the bar holder adopts imported 40Cr material.
Widely Use: Tightly impacted bolt, simple structure, often used for small hole machining.
Details
3pcs Boring Bars Size
Shank D:
S07K-SCLCR06: 8mm/0.32"
S10K-SCLCR06: 11mm/0.43"
S12M-SCLCR06: 12mm/0.47"
Overall L:
S07K-SCLCR06: 122mm/4.8"
S10K-SCLCR06: 122mm/4.8"
S12M-SCLCR06: 150mm/5.91"
CCMT0602 Carbide Inserts
10pcs CCMT0602 Carbide Inserts
Instructions
1. take out the screw
2. Insert the blade
3. Tighten the screws
Package included
1 x S07K-SCLCR06 Boring Bar
1 x S10K-SCLCR06 Boring Bar
1 x S12M-SCLCR06 Boring Bar
10 x CCMT0602 Insert
3 x Wrenches
1 x package box
Widely Use
Tightly impacted bolt, simple structure, often used for small hole machining.
Steve chasse
Reviewed in Canada on February 19, 2025
Working good
Michele067
Reviewed in the United States on August 13, 2024
I really like indexable tooling because I get nice sharp tool edges with a quick tool but change. These guys are just the ticket but if you are boring a lot of material I would suggest a beefier tool, or finish using light cuts with this set. Chatter and deflection were present when I pushed some deeper cuts.
PS
Reviewed in the United States on February 29, 2024
Works good, made of quality materials
Mr.Unzufrieden
Reviewed in Germany on December 8, 2024
Gerne wieder đđ
Chris
Reviewed in the United Kingdom on December 22, 2024
After using the tools on a job the other day they certainly donât seem bad for the money.
MIGUEL VELAZQUEZ C
Reviewed in Mexico on October 16, 2024
BUENA HERRAMIENTA, TRABAJA BIEN
Thomas Dahlen
Reviewed in the United States on September 25, 2023
Price
Annie
Reviewed in the United States on September 12, 2023
For many years I've used 1/2" TCMT insert tools on smaller lathes from 10" to 13" and workpieces that were smaller than 2" OD. They were just OK but I needed something that had a smaller nose radius to make tight inside corners and was hoping for a better finish on whatever type of steel I had available at the time. Someone had recommend that I use a smaller nose radius tool to achieve my goals. The first thing I did with these tools was to make an adapter to put the boring bar in a QCTP holder that had a 3/4" bore. I used a scrap 4041 steel rifle barrel blank. At a speed much slower than expected I got a beautiful finish. At 720 rpm, a feed rate of .003" and a DOC of .010 I got a beautiful finish. That's a much lower feed and speed than the calculators recommend so even older lathes like the ubiquitous South Bend and Craftsman lathes can get a great finish without needing speeds beyond their capabilities.
Jason Stevenson
Reviewed in Canada on June 20, 2023
needed a small set of boring bars for work I do. this set works great. the carbides that came with it work well on iron, steel and Stainless. good deal for someone on a budget. no complaints so far.
james w gaines jr
Reviewed in the United States on November 10, 2022
Lathe bits work well in my 9" Montgomery Ward Lathe. I have machined mild steel and some harder alloys. Bits are easily changed. Bits also work well and last a long time.
Tim H.
Reviewed in the United States on October 21, 2022
Amazing deal. The quality is great, never had any issue with any of these tools. Geometry is good, the heat treats good, the carbide cuts everything you can throw at it. Anybody that has any type of issues after buying this tool, before you go riding and ignorant review, just remember, are you smarter than a tool? You're probably doing something wrong if you're having issues or you have a junk machine
Mike S.
Reviewed in the United States on March 27, 2021
Well made, inserts are better than I expected, work well in mild steel, and stainless at low speed with coolant.wish shanks were 1/2" but new what I was getting
Brian C
Reviewed in the United States on February 19, 2021
I would have given this a 5 start but the packaging was confusing. The boring bars are packaged in a box that is for lathe tools. I contacted the seller and we were able to easily sort this out. The seller was extremely responsive and I will deal with him in the future.There are three boring bars. I have used the small one on five projects so far. It is strong and works well. Installing the carbide insert is easy but I would recommend strongly that you keep the grub screw on the driver as it is small and easily dropped. The inserts seem to be well made and cut easily.
Recommended Products