Your cart is empty.
Your cart is empty.Product Description
Make the Job So Much Easier
Are you always confuse how to get the flywheel off? Don’t worry, just try Valchoose Magneto Flywheel Puller. It not only do the job, but do it very well, do not damage your bikes threads at all, making your job so much easier. If you are working on mopeds, this is a MUST HAVE tool!
Advantages
There is one size 27mm for other seller, but We have two size 24mm & 27mm, you can use different size to fit your scooter flywheel. Worked great, No problems or complaints.
Resistant to Rust Material
Material: It is magnetic steel, surface treatment are anodic oxidation of a variety of colors,
phosphating antirust proc prevent from rusting.
Won’t Damage Your Machine
Using the Flywheel Puller will prevent costly damages and mistakes to the flywheel or the crank! This is a must have tool for your tool box.
mike
Reviewed in the United States on February 5, 2025
Worked for my polaris sportsman 90.
Musculr
Reviewed in the United States on February 22, 2025
Not bad for a cheap tool. Threads in nicely into the flywheel and it'll handle a small scooter sized 24mm and a larger size as well, definitely oil it up and keep it oiled in storage, this thing is made out of peanut butter steel, but if it works, it works.
Customer
Reviewed in the United States on February 15, 2025
Worked perfectly on my 2003 Suzuki LT-A50. Pulled the flywheel right off like it was nothing.
Ethan
Reviewed in the United States on January 20, 2025
Gets the job done
Customer
Reviewed in the United States on June 17, 2024
From some of the complaints i read i was concerned when i was using this but to my surprise it worked out great . Upon first i apparently did not thread the tool deep enough into the flywheel and it proceeded to pull out upon high torque . I cleaned the threads on the flywheel better as there was some very fine debris in it which made it feel like i "bottomed out" the tool the first time . The second time after cleaning the flywheel better i was able to thread the tool in deeper which made the tool have a better grip . Due to how tight the flywheel was i had to use a impact on it which it held up well to this .
Shane Pulleyblank
Reviewed in Canada on May 31, 2024
The thread pitch is wrong for listed application. And wrong thread twist to put on the applications listed. Only one side is reverse thread..... USELESS !!!!!
AJ
Reviewed in the United States on February 23, 2024
very well made especially for being cheaper than the one i originally bought on fleabay which come to find out did not have hardened threads so fleabay tool got obliterated within 5 seconds of threading it in the flywheel. THIS ONE HOWEVER, threaded right through the damaged threads on the flywheel caused by the other tool, easily removed the stubborn thing within a few good cranks with the 3/8ths ratchet nd socket🫶 flywheel come free so easily and quickly using this tool here... buy it this one just click n let er rip yall
James M. Gow
Reviewed in the United States on December 18, 2024
This tool makes removing the flywheel a snap!
Cliff Jennings
Reviewed in the United States on December 14, 2024
Great little tool for the cost, simple to use.
Recommended Products