Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Metric Machine Tap M4 x 0.7mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs

4.5 (9) Write Review
Free shipping on orders over $29.99

$7.99

$ 3 .99 $3.99

In Stock

1.Size:M6 X 1


  • Thread Size: M4 x 0.7mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
  • The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.


Product Description

1

Information

Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage. Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

1

Straight Flute Thread Taps

Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow blind holes.

Easy to Use

Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.

Coatings

Features just the base substrate without any additional coatings, suitable for wide ranges of applications.

High Speed Steel Taps

  • High hardness and strength, good toughness
  • Good wear resistance and heat resistance.
  • Good process performance.
  • Perfect for drilling and tapping aluminum, zinc, alloy etc..
1

Tips

  • Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is easy to cause breakage to the tap, so it is not recommended.
  • Use with tapping oil to get higher quality thread and more durable taps. Cutting oil is lubrication, cooling and anti-sticking. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.
Customer Reviews
4.6 out of 5 stars 85
4.4 out of 5 stars 161
4.4 out of 5 stars 121
4.3 out of 5 stars 70
3.8 out of 5 stars 68
4.0 out of 5 stars 55
Size M12X1.25 M6 x 1 1/2"-28 UNEF 3/8"-16 UNC M4.5-M6 / 8mm-20mm M4-M10 / 2mm-10mm

Wiseguy59
Reviewed in the United States on February 23, 2025
For the few times I'll use these taps, they will do the job.
david kenyon
Reviewed in the United States on January 19, 2025
Great
George Spafford
Reviewed in the United States on August 7, 2024
I busted a tap late on a Thursday night and had to get replacements in a rush. Amazon could have them to me on Saturday. Problem solved. I tapped the holes I needed with these and was able to finish up. I only did a handfull of holes - about 1/4" thick machine steel - and these worked. I've used other Uxcell stuff in the past as well.
kevin goudy
Reviewed in the United States on August 25, 2024
This tap or these as there are two came in on time were shipped on time and were exactly what in needed. These are the size of my license plate bolts on my Sequoia and some had put the wrong bolts in before. I took the bolts out and used the tap and in minutes my plate fit on snug like it should.awesome value they are very inexpensive and easy to use. They are durable and the tip is sharp enough that it is self tapping. They are just as the pictures made them appear. They look great and work well.
Cody Honaker
Reviewed in the United States on June 6, 2024
Powdercoated the gas cap and the threads got a bit in, had to get this to save the threads and worked flawlessly. Great price and will Dave for the next odd ball job
Steve M.
Reviewed in the United States on December 30, 2024
No problem with these taps at all.
Customer
Reviewed in the United States on April 18, 2024
Seems to be a quality product and delivered on time.
Lorry Lynn
Reviewed in Canada on December 27, 2021
Easy peasy
bleys2112
Reviewed in the United States on June 11, 2019
Nice little taps... Good and sharp! I bought the two pack because I was cutting threads in 1/4" aircraft aluminium and was worried I might break one. Twenty holes later and the last hole cut as easy as the first! I'm very satisfied with the purchase. Just go slow and work em back and forth to keep the cuttings clear and you'll have no troubles at all.