Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Double-Sided Copper Clad Laminate PCB Circuit Board, FR4 100x70mm 3.94x2.76 inch, 1.5mm Thickness DIY Prototyping PCB Board, Name Board, 5pcs

4.7 (12) Write Review
Free shipping on orders over $29.99

$9.29

$ 3 .99 $3.99

In Stock

1.Size:70mmx50mmx1mm


  • 【Material】 Material: FR-4 Glass Fiber, Copper; Layers: Double-sided.
  • 【Size】Dimension: 100x70mm/ 3.94x2.76 inch(L*W); Thickness : approx. 1.5mm.
  • 【Applications】Great for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.
  • 【Stable】Mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate.
  • 【Note】The oxide layer on the surface of the copper-clad laminate needs to be polished clean with fine sandpaper to ensure that the carbon powder can be firmly printed on the copper-clad laminate during transfer. The surface of the board should be polished bright without obvious stains.


Product Description

copper glad laminate

Copper Clad Board

Specifications

Material: FR-4 Glass Fiber, Copper

Layers: Double-Sided

Applications

Widely used in television, radio, computer, mobile communications, and other electronic products.

Features

  1. High mechanical and dielectric properties
  2. High flatness, excellent bending strength at high temperature
  3. Good heat resistance and moisture resistance
  4. Low thermal conductivity, excellent processing performance

NOTE

  • Length Tolerance: +/-3mm.
  • Width Tolerance: +/-2mm.
  • The fingerprints or scratches on the surface does not affect its use.
  • Please pay attention before purchasing!

Application

Making PCB Circuit Board

PCB Circuit Board Making

Name Board

Name Board

DIY Experiments

DIY Experiments


Jean-Francois Houde
Reviewed in Canada on January 15, 2025
les 5 circuits PCB sont de mauvaise qualité. tous avec des défauts sur le cuivre! impossible d'utiliser ces PCB en électronique
anto77
Reviewed in the United States on September 29, 2024
the boards arrived a little scratched up, most of the scratches were shallow, superficial and didn't effect when I etched the boards, but there were a few deeper ones. they etch well, but make sure to wash them well before printing on them.
Andrea
Reviewed in the United States on July 15, 2024
i took my chances based on the review i saw, and unfortunately this time i lost. The boards are of a VERY poor quality and have MANY defects. Of the 5 boards, none were free of defects. If i had more time, i would absolutely return these for a refund. I will be asking amazon support for at least a partial refund as these are just so bad i was only able to finish my project by breaking apart the circuit into several smaller circuits, using the "best parts" of these boards, then soldering the pieces together... Buyer beware! these boards are truly awful.
Joe
Reviewed in the United States on July 13, 2024
Mild damage. But overall, good for the price
Lunix
Reviewed in the United States on May 31, 2024
I just got these and opened them. I took photos of one side of two different boards. (They're two-sided copper.) I would not use these to make PCBs- they'd cause problems. But I'm not using these for that (and I stopped making PCBs for myself a few decades ago). I'm just using them for some shielding and, one for ESD protection on my bench. The third phot shows some of what was on the paper towel after I used Scotch-brite, then wiped both sides with acetone. Hmmm...not great.I've seen similar complaints about other brands of cheap boards on Amazon. PCBs are so inexpensive now, it's not really worth making them yourself anyway (unless you are trying to learn).
Nathan M.
Reviewed in Canada on February 9, 2024
All 5 boards are precisely and equally trimmed, but to 180x119mm, not 180x120mm as advertised.Otherwise, the boards appear to be completely flat. Thickness is correct at 1.5 mm. Material appears to be FR-4 (not phenolic, anyway).The copper surface is very clean, with only superficial blemishes, and one scratch about 5mm long near the edge of one board.Deducted 1 star for the 119mm and the one scratch.
Roy
Reviewed in the United States on November 24, 2024
I attempted deep engraving with my laser engraver, expecting it to completely isolate traces, but the board still conducted electricity in areas that should have been non-conductive. Low-quality copper layers or poor adhesion to the substrate could be a factor here… other similar products have worked flawlessly with this same process…Overall, I’m disappointed with the quality and durability. The product didn’t meet my expectations for either packaging or functionality. Improvements in shipping protection and material quality are necessary for a better customer experience.
Tinkerer Mike
Reviewed in Canada on April 20, 2024
Accurate dimensions, structurally sound
Ystertjop
Reviewed in the United States on April 16, 2022
Works well for both heat and UV transfer as well as hand drawn circuits.I would recommend.
PeteH
Reviewed in Australia on November 8, 2021
WILL BE FIT FOR PURPOSE.DELIVERY TIME GOOD.
scott pelton
Reviewed in the United States on May 26, 2020
Good grade of base epoxy fiber and copper clad. Prints and etches very nicely. Fast shipping.
PenRev
Reviewed in the United States on February 17, 2020
Nice boards for my Electronic Hobby.Would buy again.