Your cart is empty.
Your cart is empty.Product Description
Information
When tapping, appropriate lubricating oil is good for cutting or cooling, making the cutting easier and faster, improving the smoothness and dimensional accuracy, and helping to extend the service life.
The following lubricants are recommended: steel - cutting oil, machine oil; pig iron - dry oil; aluminum - kerosene; stainless steel - mixed kerosene; hard plastic - dry oil. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.
Die Stock Handle Wrench
The die stock fits round dies. The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod.
Easy To Use
The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
Features
- Round die holder is featured with adjustable screws to fix the dies
- The die stock can securely hold round dies and is easy to operate.
- Provides good wear resistance for long service life.
Round Threading Dies
The round dies can process, correct or clean external threads. Conical locking hole, strong locking and not loose. Great for maintenance and repair work on pipes, boards and machinery.
Wide Applications
For rethreading existing threads in hard materials like metal, or making new threads in softer material such as plastic. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. NOT suitable for tile, concrete, walls, stone, etc.
Alloy Tool Steel Dies
- High hardness
- Wear resistance
- High hardening capacity
- Tempering resistance
Tips for Round Dies
The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
When tapping, add suitable lubricating oil to the cutting edge, and repeat the operation 3-4 times until the thread length is obtained. When using by hand, pay attention to even force and avoid blind force.
Koebin
Reviewed in the United States on February 15, 2025
Didn’t figure it out until after I threaded my barrel then won’t fit any 1/2 28 pitch devices. Total waste of money and now have to cut barrel 1/2 shorter and get it done again.
robert h…
Reviewed in the United States on July 21, 2024
Used it to cut threads for a muzzle brake, worked perfect
Allen K.
Reviewed in the United States on December 4, 2024
Litterly bought it for one project but it did it perfectly. A+++++
Paul Hutchinson
Reviewed in Canada on January 9, 2024
Solved the issue I needed to fix.
Michael T. Edmonds
Reviewed in the United States on September 7, 2023
I purchased this to thread a barrel on a 22lr pistol, and it worked great. I was impressed with how easy the job was using this threader.
Richard W Marsh
Reviewed in the United States on July 28, 2023
Solid tool worked fine for fixing a cross threaded thread.
_User2010
Reviewed in the United States on April 17, 2023
I just finished using this die and wrench to re-thread a $300 Criterion .308 Stainless Steel barrel and it worked flawlessly. I had damaged the first few threads and was unable to thread any muzzle device on.I typically avoid buying Chinese made tools but I took the risk as this would likely be a one-time use application. I was able to re-thread the damaged threads in just a few minutes. The barrel now threads all of my .308 5/8x24 muzzle devices just fine.PROS:1. Excellent price2. Easy to use3. Build quality is sufficient for my one-time use. I can't speak to the long-term durability.CONS:1. The instructions are all in Chinese. Watch a YouTube video on how to use a die tool if you don't know how.
Hd98fxdl
Reviewed in the United States on December 24, 2022
Used this to clean up threads on a rifle barrel. Works great.
Steven A. Moon
Reviewed in the United States on December 15, 2022
Worked ok for what I wanted to accomplish. Not heavy duty!!
Recommended Products