Your cart is empty.
Your cart is empty. Specification:
Model: MF58
Resistance Value: 10K Ohm
B Value: 3950(+/-1%)
Operating Temperature Range: -55-250C
Lead Type: Axial Lead
Lead Diameter: 0.5mm / 0.02"
Body Size: 2mm x 3.6mm / 0.08" x 0.14" (D*L)
Total Length: 60.4mm / 2.38"
Material: Glass, Metal
Package Content: 20 x NTC Thermistors
Description:
1.Glass sealed packaging with firm structure and good heat resistance, applicable in severe environments.
2. High precision resistance, B values with high reliability and stability, high sensitivity, good interchangeability, good consistency, high performance, small size and light weight.
3.Suitable for related equipment with temperature measurement and controls thermal protection circuits in family appliances, such as air conditioner, refrigerator, electromagnetic oven, bake oven, electric roaster, microwave oven, etc.
4.Ideal for Temperature measurement and control circuit in the equipment for industrial and agricultural, such as instrument and coils, automobile circuit, integrated circuit module, transistor amplifying circuit, quartz crystal oscillator and thermo-couple.
Customer
Reviewed in the United States on May 19, 2022
Worked perfectly for repairing the Climate Control on a 2006 volvo Xc70. 4 months later and still blowing cold!
Customer
Reviewed in the United States on January 26, 2022
replaced defective thermistor that goes between negative posts inside19.2v craftsman nicad..fixing red blinking no charge defective error..
Roanoke Rowan
Reviewed in the United States on January 18, 2021
They do what they are supposed to, simpler and cheaper than most other ways of measuring temps. Had to swap the voltage and ground from what I expected, since I was getting backwards readings (heat and cold swapped) but that's no big deal since it was just a matter of switching the polarity.
Glen E Thomas
Reviewed in the United States on May 20, 2020
Needed for a project, works as intended
T. Spears
Reviewed in the United States on February 18, 2020
Used this to fix a broken ice maker on a Kenmore fridge. Works perfectly now and didn't spend $200 on a new ice maker.
Adam McClendon
Reviewed in the United States on January 9, 2020
Work as described
David Vilkomerson
Reviewed in the United States on July 24, 2019
Works well, came on time, as described....
AR
Reviewed in the United States on October 2, 2019
This is a comparison between the SHT31 and this thermistor. While the comparison may be unfair because the SHT31 is about $15.00 Dollars each, while this thermistor is about 0.25 cents each.Anyway, if you want to fool around with this thermistor, you are welcome to do so. For a generic thermostat indicator, it works, but if you need a little more stability, or control an air conditioner, etc., you will be better with the SHT31 or something else.I attached a picture that shows both sensors in the same room, hooked to the same controller. The blue line is the SHT31 temperature, the white line is the SHT31 humidity line, the orange line is the thermistor temperature line, look how saggy the line is, that line is all over.
Recommended Products
