Your cart is empty.
Your cart is empty.Product Description
KIT OVERVIEW
The-new-style Gas Fireplace Remote Control Thermostat Kit
• Easy Access Thermostatic Control
• Battery Powered Transmitter and Receiver
• Low Battery Indication
• Child Proof Lock-out
• 16 Security Codes
• Quick Disconnect Wiring Assembly
INCLUDE : Remote, Receiver, Wall plate, Wiring to connect receiver to valve System - 6 Screws (For Wall Cover Plate and Remote Control)
GENERAL INFORMATIONS ABOUT RECEIVER AND REMOTE CONTROL
Receiver Overview
• Receiver Connects To Any Standard Millivolt Gas Valve System
• Easy Access To The Receiver's Battery Compartment Uses a Sliding Battery Cover
• The Receiver Have a Learn Button
• Pre-Programmed For Quick Installation , Connect The Two Terminals To The (TH ) and( TH/TP) Terminals In The Millivolt Valve
• This Receiver Requires Four (4) “AA” Batteries (Batteries Not Included)
Remote Overview
• Fireplace Remote Control and Receiver With AUTO Thermostat Function
• Upgraded Gas Fireplace Remote Control Thermostat Has a Blue Backlight For Better Vision at Night
• Remote Allows You To Turn Your Gas Logs on/off or Set The Temperature You Want
• It Can Direct Replacement For SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
• This Wireless Thermostatic on/off/ Remote Control System Provides a Safe, Reliable, and User Friendly Remote Control for Millivolt Valve Gas Appliances
• The System Can be Thermostatically or Manually Turned on And off With The Transmitter
• This Remote Control Requires Two (2) “AAA (batteries not included)
LEARNING TRANSMITTER TO RECEIVER
-1-The transmitter privacy (DIP) Switches are preset at the factory. Setting the 4 bits DIP Switches on transmitter to select a security code.
-2- Put the receiver slide switch to “REMOTE” location. Using a small screwdriver or end of a paper clip gently press and hold the ‘LEARN ‘button on the receiver to accept the transmitter security code upon initial use, when you release the LEARN button the receiver will emit an audible 3 “beep” sounds.
-3- After the receiver emits 3 “beep” sounds. Press the transmitter “ON “or “OFF” button and release at once. The receiver will emit several beeps indicating that the transmitter’s code has been accepted into the receiver.
Note:( If matching failed from the the first attempt repeat step 2-3 )
Compatibility
This Remote Control System is Designed For Use With a Millivolt Or 24V Gas Valve System Only
• It can Direct Replacement For SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
• Always Check The appliance Home Owner’s Manual For Additional Information, Or Warnings Regarding Accessory Installation Before Connecting This Remote Control System
• Do Not Use This Remote Control System On Applications With Voltages Above 24 Volts AC/DC And 1 Amp Current
• Do Not Short (Or Jumper) Across The Gas Valve Terminals To Test The Remote Control Installation
• Attention: This Kit Does Not Work With Latching Solenoid Gas Valve Systems Please Read Your Fireplace Directions For Correct Application Before Purchase.
Millivolt valve System
This kit is compatible with millivolt gas log valve systems please read your fireplace directions for correct application before purchase. , if you have millivolt gas log system as in the picture , then this Remote will work on your fireplace.
Solenaid valve System
This kit not compatible with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase. , if you have servo motor valve as in the picture , then this Remote will not work on your fireplace.
Craig Strand
Reviewed in the United States on January 26, 2025
Yep! Does what it says. I placed the remote receiver with the wall plate in the box replacing a manual switch. The wifey loves it!
Frisco
Reviewed in Canada on January 26, 2025
Very easy to install works well the backlit display is a good upgrade .Seems to be a very slight delay after pressing the on or off buttons maybe a second delay you hear a beep and then fire place ignites or turns off depending on witch button pressed .All in all seems to work very well have not used for very long yet but all indications so far are positive.
MotomoGirl
Reviewed in the United States on January 13, 2025
It honestly took 5 minutes to replace the old thermostat that had broken on our gas log insert. I really like the backlighting on the remote and the holder for it is nice and very understated. I took away a star because the temperature thermostat setting on the remote only goes up. You have to cycle through the entire range if you want to drop the temperature setting even one degree. and if you miss, you have to go through it all over again. A minor thing, but really annoying. Other than that, love the product.
Ski2Live
Reviewed in Canada on December 9, 2024
This was cheaper than replacing *just* the remote control on my old unit.Installed easily.Only complaint is that setting the thermostat temperature on the remote control is a wee but clunky.Otherwise, a great deal.
roy v brannan
Reviewed in the United States on December 29, 2024
Easy replacement install for Majestic gas fireplace.
Customer
Reviewed in Canada on December 29, 2024
Works great and a lot cheaper. Wanted a thermostatically controlled unit... Works great
catherine
Reviewed in Canada on December 17, 2024
The item is as described. It works perfectly and was simple to install with the directions. Saved us calling in someone and overpaying for the unit.
chrharris
Reviewed in the United States on December 16, 2024
This fireplace remote worked perfectly. I spent over $100 on one of the bigger known name brands for another fireplace. This one you can actually see the screen being it’s lite blue with black numbers instead of dark grey with black numbers like the more expensive ones. I highly recommend this remote if you need to replace one for your gas fireplace. And it’s less than half the price of the big brands.
Ben Pahlow
Reviewed in the United States on December 13, 2024
Winter in Texas, just opened after my return date, and the box was completely defective, now I'm out all my money
CAR
Reviewed in the United States on November 18, 2024
This remote works great.. easy to install and finally my fireplace works like new!!
Austin Seagrave
Reviewed in the United States on October 30, 2024
A fireplace remote that has a thermostat? Yes please! We eat our house with a ventless gas fireplace no more do we have to turn the fireplace off and on. The thermostat on this thing really works! And the price is fantastic. I have paid $100 every time I replaced the remote and it didn't have a thermostat. I like this one because it takes two double a batteries instead of that little teeny battery. I put the receiver box in myself took one second very easy. Last winter we went without a remote so we had to get up and turn the fire off and on constantly. It's going to be a nice winter!
downtown
Reviewed in the United States on October 23, 2024
Easy enough to replace this receiver for a non-working remote receiver in a 25 year old Heat-N-Glo fireplace I have. The instructions said to attach each wire to one of the two designated terminals, but didn't specify which wire goes to which terminal, so I’m assuming it doesn’t matter (or if it does I just got lucky). The replaced receiver did have different colored wires connected to the terminals. Will update if my house burns down…. (I might have to deduct a star or two).
Jeff Dennis
Reviewed in Canada on October 13, 2024
The Napoleon version of a wireless remote was significantly more expensive, so when I found this one, I ordered it to give it a try. Installation was simple. Two wires to connect and a simple pairing process. The good news is that it works perfectly and saved me a fair chunk of cash.
Recommended Products