Your cart is empty.
Your cart is empty.Product Description
Garrett
Reviewed in the United States on January 8, 2025
The original plate on my SV08 wore out on me pretty quick, as PETG stuck to it too well and peeled some of the PEI coating off. I was searching for an affordable textured replacement and ran across this one and decided to give it a try.It works way better than the original plate. It holds PETG and PLA both very well, but also releases the PETG without damage. I do use Windex to clean the sheet before printing PETG, which leaves just enough residue to act as a release agent and allow the PETG to release a little easier. I print 95% PETG on this printer.I would definitely buy this again. Works better than the original plate, and the price wasn't too bad.I have only used the textured side. I can't comment on the wacky design side yet.
Axel J.
Reviewed in the United States on August 31, 2024
This build plate do not have good adhesion. You'll need to apply glue and/or hair spray to get good adhesion. This goes for both side. The side for ABS is more difficult to get a good adhesion. Removing the projects is easier since you can bend the plate and the pieces will pop. Sometimes I have to apply 2 or 3 layers of glue.
TheRedStormer
Reviewed in the United States on July 5, 2024
Sometimes I have to switch to my old one when printing cheap ASA because of the poorer adhesion. This is less textured than that one so I assume that's why. The triangle pattern looks really cool but I rarely use it because I mostly use ASA and I mostly print large parts. It's thinner and flatter than the original and to be honest feels higher quality than OEM.Works pretty well and the drawbacks are worth it most of the time, especially for PLA and other easy to print materials. I wouldn't use it as a drop in replacement for a damaged stock one.EDIT: I happily used this plate for many months, but after using it with some old ninja flex TPU and nanopolymer print adhesive, it has been damaged. I'm buying another cause this is just a good product for the price.
Alexis
Reviewed in Mexico on May 30, 2024
Al principio creí que el sensor no la detectaria pero al mandarla Home la detecto y deja un buen acabado abajo
Digicrat
Reviewed in the United States on May 25, 2024
This has been the easiest and most effective upgrade for my old 3D printer. Before this build plate I was always having issues with adhesion to the point that I literally hadn't touched the printer in years out of frustration. The printers original Kapton tape covering was ineffective, and the glass plate I had tried later on was just annoying. In short, if you don't already have a magnetic/steel build plate, get one.This platform was quick and easy to install, and after re-leveling the bed with it, prints have been perfect (or at least there haven't been any failures due to bed adhesion). When a print is done, it's easy to pop the plate and the piece off for removal. No need for glassed-bed clamps, glue, hairspray, or any of the other convoluted encantations that have developed over the years.The only annoying piece is that it is sometimes difficult to remove fine residue from the plate (mostly from the outer brim), even with a little rubbing alcohol, though that's not the worst problem to have. Typically, if I'm lazy, that residue isn't enough to affect the next print, and often pulls off cleanly if the next part overlaps it.
Glenn
Reviewed in the United States on May 2, 2024
I have worked with this plate for a few weeks now. Nothing sticks. Heat doesn’t work. Dry filament doesn’t work. Slower speed doesn’t work.UPDATE: I changed the build plate to Textured PEI and increased the temperature 5 degrees on the carbon fiber side. Works like a charm now. Don’t use the Smooth PEI/High Temp. Doesn’t work a lick.
bastou
Reviewed in Canada on May 2, 2024
parfait
Ilija
Reviewed in Canada on February 27, 2024
Have had issues with build plates in the past not lasting long, especially PEI build plates. This one holds up after 100s of prints and is still easy to use.
eric
Reviewed in the United States on October 30, 2024
I purchased an X1C before Bambu began including PEI build plates. So I purchased one of these and have been using it for nearly 2 years mainly with ASA with amazing bed adhesion results. I later purchased a P1S with the included PEI build plate and quickly learned not all PEI plates are created equal. The factory bambu plate has had more bed adhesion issues than i would like and im buying another one of these sheets for my P1S to improve that machines reliability
Sojourn
Reviewed in the United States on October 15, 2024
I'm getting so sick and tired of the crap that's being sold on amazon as of late. Amazon used to care about what was sold on their site, but it's just becoming TEMU, Actually TEMU is probably better than half the crap I order on amazon now.This item came to me completely warped from the factory. The box they shipped it in was unscathed no damage, but the item itself is completely warped and unusable. I would not recommend this to anyone your prints will fail...It also didn't come with the advertised magnetic sheet, which they show in the pictures it comes with and the discription. It might work better with the magnet but who knows the thing is so badly warped I can't use it.
jesse allen
Reviewed in Canada on April 11, 2024
ther product works great but noticed brownish makrs on my prints bottoms and then when i used a light on the bed i realised its rusting....?? ive only used black and white filiment and noticed the marks showing up on the white i use 90% rubbing alcohol on my bed for cleaning so thats not it sooo ya kinda useless gunna be asking for a refund
CC
Reviewed in Canada on August 21, 2023
Works well on the Creality K1. So far very durable. Comes with a good replacement magnetic sticker. Textured PEI is much more convenient than glue stick + the default smooth PEI Plate.Versus glue stick + smooth PEI it also has the advantage of having a consistent bottom layer texture (no more glue streaks depending on how well it was applied), although keep in mind the texture of the PEI Plate will appear on the bottom layer as well.
rtj
Reviewed in the United States on February 16, 2023
There are theoretically a lot of companies selling PEI plates for the Bambu printers. Theoretically, because no one was prepared for the demand. My thinking is that none of these vendors make the PEI sheet that is applied to the metal and probably almost all of them are buying it from the same manufacturer, so why not try it.I have the gold smooth and textured. The plate is flat and high enough yield that it won't take a set in normal use. The PEI layers are thick which allows it to absorb some of the thermal stress between the part and the plate. There are some small bubbles visible in the adhesive on the smooth side, but it has not caused any surface problems and does not seem to be getting any worse.I have had really good results with PA-CF from Bambu and HTPA-CF from BASF, as well as PolyMaker CoPA, Polylite PC, and Taulman PA. I was surprised at how well the smooth side works on the PC which is a notoriously difficult material. Basically, parts are staying stuck while printing and popping free when I flex it.What more can you ask for? Well, I guess the barcodes to fool the lidar, but this isn't really a problem. Very happy with it. This is my build plate until I wear it out.
Recommended Products