Shopping Cart

Your cart is empty.

Your cart is empty.

Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

1.Style:Extruder


About this item

  • Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
  • Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
  • Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2,its extrusion gear can be replaced.
  • Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.



Product Description

1
2
1
3

Specifications

Material Aluminum alloy
Color Gray
Drive Gear 40 Teeth
Package Included 1 x Aluminum Extruder Kit

Luca
Reviewed in Italy on February 3, 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
POCKPICKETER
Reviewed in the United States on January 29, 2025
This replacement Filament Extruder and Upgraded Capricorn tubing has been a game changer. Getting rid of the polymer stock extruder has given me peace of mind. It was super easy to install and is very durable being metal constructions.The Capricorn tubing helps accuracy with your prints and allows it to flow through the hot end better.I highly recommend everyone should upgrade to this all Metal Extruder.
TriniMiche
Reviewed in the United States on July 9, 2024
This is a definite upgrade to the plastic part that comes with the Ender3 v2. Assembly is pretty easy and it works great. It feels very sturdy. I hope that this would just be standard with the Creality 3d printers. I did not use my printer a lot before the plastic level broke.
Darren
Reviewed in the United States on May 23, 2024
This upgrade made a nice improvement to my printer. I think the extruder drive should be all metal from the factory but it wasn't and at least this package was inexpensive. The old drive gear is difficult to get off. Be aware before you start, you need some form of a bearing or gear puller to do it. I rigged one from big fender washers and long nuts/bolts. There are some patterns online to print one before you do the swap. Once complete be sure to recalibrate your E steps. Once done you should see good improvement. The springs and tubing are a bonus upgrade as well.
Der Vernünftige
Reviewed in Germany on May 22, 2024
Da ich ohnehin ein neues Extruderzahnrad einbauen musste, habe ich die Gelegenheit genutzt, die im Original etwas zweifelhafte Plastikmechanik durch diese Metallteile zu ersetzen. Der Einbau ging völlig problemlos vonstatten, alles passte auf Anhieb. Es sieht jetzt nicht nur wertiger aus, sondern ist auch wirklich ungleich stabiler. Man sollte realistischerweise aber nicht erwarten, dass nun um Welten besser gedruckt wird. Höhere Zuverlässigkeit ist allerdings auch schlecht messbar. Ich bin jedenfalls sehr zufrieden und kann das Teil jedem nur empfehlen, der keine übertriebenen Erwartungen hat.
Bradley
Reviewed in the United States on December 30, 2024
A must have.
Gregory P. Kretchmer
Reviewed in the United States on November 19, 2024
This metal extruder is very well made, fits exactly. My old one cracked in a well known spot but held on just enough to kinda work. This new extruder works very well every time. What more can I ask?
carlos ruiz tapia
Reviewed in Mexico on September 21, 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
Jugo
Reviewed in Canada on March 25, 2023
I bought this because my stock extruder broke and wasn’t pulling enough filament in. The installation was very simple. I had an issue with my motor since it’s the older version, and had to cut the little gear off. The shaft was also shorter but instead of buying a new shaft, you can just put the new gear upside down. It works great! Also, if you have the older motor, you will have to grind down a flat surface for the set screws to sit in.The tube was a very easy install. The springs are way stiffer than the stock ones. They are also flat on the ends and have the bed sit on them perfectly even.Overall, this is a MUST BUY. Even if your extruder isn’t broken, get this one because it preforms so much better!
Dale Gribble
Reviewed in the United States on August 21, 2022
This metal extruder made for a nice upgrade on my Ender 3 Pro. The plastic factory extruder cracked and this kit includes a much higher quality metal extruder.Instructions are included, but there may be a tiny bit of variation depending on your printer. My packaging was missing the screws that hold the filament tension spring in place. With the old plastic extruder in hand I was able to salvage some pieces to make everything fit.The Capricorn bowden tubing included in the packaging works great so far too. I'm familiar with using Capricorn tubing and this seems legitimate and has held up throughout a week of constant printing. There should be enough Capricorn tubing for 2 uses, but it varies depending on your setup.The only thing included I did not use were the bed springs. I already have silicone bed mount spacers that work well and didn't want to mess with the great results they were providing.For the $15 price, there is a lot of value here! The metal extruder is quite the upgrade and is much easier to load filament.
xgx
Reviewed in Canada on July 30, 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
Nick
Reviewed in the United States on October 16, 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Recommended Products