Your cart is empty.
Your cart is empty.Product Description
New Universal Ceiling Fan Remote Control Kit
This is for AC ceiling fan lights only, can not work for DC motor fan lights.
This fan remote control kit works with most 110V 3-speed AC ceiling fans and is compatible with dimmable LED and incandescent bulbs, other LED and all CFL lights only support on/off function and are not dimmable. Compatible with most downrod fans.
- 3-Speed: Basic 3-speed (High/Medium/Low) fan speed control features.
- Light Dimmer: Works well with all incandescent and dimmable CFL/LED lamps.
- 1/2/4/8 Hours Timing: While the fan is on you can press timer button to turn on a 1/2/4/8 hours run timer.
- Walk Away Time Delay: This ceiling fan remote includes a Walk Away Time Delay feature that allows you to turn the light off but still have light with in 30s as you leave the room.
- TWO Adjustable Lighting Style：1.Long press to Dimming from 1%-100% directly. 2.Dot Click to dimming from 1%-5%-... -100%.
- Flicker-free dimming: Light Dimmer is compatible with incandescent bulbs and some dimmable LED lights, no flicker when dimming, protects your eyesight
Notice: The initial mode brightness of the light is 100%, long press down to dim quickly, tap the gradient dimming
Light Timing- Two way to use
- Long press to Dimming from 1%-100% directly
- Dot Click to dimming from 1%-5%-... -100%.
You can adjust the light brightness 1%-100% (brightest) according to your needs. The initial mode brightness of the light is 100%
Notice: Flicker-free dimming, which makes you comfortable when you dimming, not happenn the strobe hazards, to protect your eyes.
RECEIVER INSTALLATION:
Newly upgraded products
1. All the product lines are improved, using blue, black and white wires, and labeled to avoid wiring errors when customers use it
2. Wiring nuts are easier to use
3. Temperature protection device, when the brightness of the bulb suddenly decreased seriously or directly off, directly replace the bulb can be, the product can still be used!
IMPORTANT:
WHEN INSTALLING CEILING FAN REMOTE CONTROL ANY EXISTING CONTROLLER MUST BE BYPASSED OR REMOVED.
REMOTE CONTROL RECEIVER IS INTENDED FOR USE ONLY WITH CEILING FANS WITH ALLOWANCE FOR INSTALLATION OF REMOTE RECEIVER INTO FAN CANOPY
Disconnect the power supply before installation.
Fan Remote Control Kit Function
- 3 Fan Speed Control: High/Medium/Low
- 4 Timing Control:1H / 2H / 4H / 8H
- Fan Lamp/Fan: ON/OFF
- Power adjust range:1%-100%
- Voltage:110-120V/60HZ
- Max Power:(Fan within :200W, Lamp within:160W)
- Please do not overload!!
Easy to install
No need to remove bulbs and fans. Only 5 wires need to be connected.
WARNING:
To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring.
If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
Universal Ceiling Fan Remote Control
- This fan remote control kit works with most 110V 3-speed AC ceiling fans and is compatible with dimmable LED and incandescent bulbs,
- Compatible with dimmable LED and incandescent light bulbs, undimmable LED lights and all CFL lamps only support ON/OFF function.
- Compatible with most downrod style fans, not recommended for use with hugger style fans.
Wireless Control
This HD3 fan remote control kit works most 110V 3-Speed AC ceiling fans.
Effective Remote Conntrol Distance:>18m
DS
Reviewed in the United States on March 13, 2025
Works great. Got a replacement remote from the light/fan manufacturer and it worked like crap. This one is great. Can be in the next room and still controls the lighr
Hank
Reviewed in Canada on March 1, 2025
Module that fits in fan housing bigger than some and very hard to fit in.The worst part is the lights barely dim.Would not purchase this item for that reason alone.
Ray
Reviewed in the United States on February 22, 2025
Very good quality. Easy to install.
Tanner
Reviewed in Canada on February 19, 2025
Product worked as it should but does not fit in the hub of the fan.I had to leave it down from the ceiling ½ inch
richard maskaleut
Reviewed in Canada on February 16, 2025
Belle manette et fait la job
DaveCarrera4
Reviewed in the United States on February 10, 2025
This remote was fairly easy to install on a ceiling fan. It works quite well and has a display. We enjoy using it.
T Sutton
Reviewed in the United States on January 10, 2025
The media could not be loaded.
Philip Maschke
Reviewed in the United States on August 23, 2024
Most kits that will turn a ceiling fan wireless will have the exact same receiver that you mount inside the fan. But what makes this kid more appealing than any other is 1. The remote and 2. the accessories. I have installed many of these, converting our home into a smart home, so I think that including the quick connectors is a great way to make an installation easier, especially for the first-time installer. As you can see in the images, there will always be a nest of wires, but attaching one side first, then attaching the other side by sliding in the wire then snapping it into place is so much easier than trying to bundle multiple wires with a twist on connector. Especially when you are up on a ladder in an awkward position.The remove with the display makes it look more modern and elegant than some other fan remotes you'll find. They all do the same, but if this one is mounted to the wall or visible, it gives it a more sleek look.With that said, this is the third of these devices I have installed and interestingly, you'll find the same product from various sellers on here. From what I can tell, they are all the same. Just double-check the "antenna" of the receiver. One unit I received had a bit of wire poking out of the insulation, which caused a short and broke the received when it touched the frame of the fan. But replacement was a non-event.
Sean Q.
Reviewed in the United States on August 11, 2024
I had to return this product. The wiring doesn't match the existing wiring on my fan or in my house. And the way their Instructions tell you to wire it make sense. Also, I followed the directions carefully and it never worked properly. I'm glad it worked for some people. It just wasn't effective for me. I ended up going to Home Depot and paying twice as much but, the wiring matched perfectly to the wiring in my house and on my fan. Blue to blue black to black white to white. The Home Depot fans, though twice the price was much simpler and straightforward no nonsense. Also, when done installing the Home Depot version, it worked perfect no issues. So buyer be careful this may not match the wiring. Your fan has and you will be forced to follow directions which did not work for me.
Mike
Reviewed in Canada on December 27, 2024
Easy to swap out, nicer remote than the OEM and way less money than the big box stores.
Francis (Ottawa, Canada))
Reviewed in Canada on December 20, 2024
simple to install, but disappointing for one main absent feature seen on other competing products.* Memory issue - there is no memory of the light intensity status from the last time the light was used. For example, if you usually use the light at 50% intensity, you will have to decrease the intensity from 100% to 50% every time you turn on the light. Disappointing!Note: LED ghost issue - A made-for LED solution (such as this remote control fan & light receiver) will not likely address any "LED bulb ghost" issues. LED bulb are so sensitive that they pick up energy from surrounding electrical sources (connected or not) and often do light up faintly, without any way to turn them off.
shecanic
Reviewed in the United States on November 4, 2024
i got this remote control kit because my ceiling fan didn’t have one, and while it works, there are a few things to consider. installation was a bit tricky—I’m not an electrician, so I had to watch a few videos and be careful with the wiring. once it was set up, it did what it’s supposed to: fan speeds are easy to adjust, and the dimmer helps me set the mood in the room.what bothers me, though, is the range. i expected to control the fan from across the room, but it only works well if i’m close by. also, the buttons feel a bit cheap, and i’m worried they might wear out over time. it can interfere with other sets in the house f you hve more than one so you need to set the channel inside the box behind the plate so that they operate on their on range. worth noting BEFORE it goes behind the wall lol
Bobber
Reviewed in the United States on October 8, 2024
The wires on the reciever are too short. I had to add additional wiring to complete the connection. The light fan could be turned on/off with the wall switch. I now have to turn it off/on with the remote only, which is not great. Update, I now have to push the button several times to get aby response. I highly recommend you pass on this.
Recommended Products
$32.34
$ 16 .99 $16.99