Your cart is empty.
Your cart is empty.4.1 out of 5 stars
- #113,443 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
- #132 in Ceiling Fan Remote Controls
Product Description
Prichor Universal Ceiling Fan and Light Remote Control Kit
Say goodbye to single control to your ceiling fan light via pull chain or wall switch! Our universal ceiling fan remote control kit enables you to control your ceiling fan and light via RF remote control. It’s time to enjoy smart life with home automation.
Prichor fan controller is suitable for most 3 speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell, Hampton Bay and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this controller in few steps.
This ceiling fan & light remote control kit has the function of dimming.
The light dimmer compatible with incandescent light bulbs and some dimmable LED lamps.
Most LED lights and all CFL lights are non-dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function.
3 Speed Control & Timer Function
The universal ceiling fan control enables you to adjust the fan 3 speed, turn on/off light, and time schedule settings. Make your life easier and more convenient.
Adjustable Fan Speed
The ceiling fan control offers 3 different fan speeds, each designed to provide optimal comfort without any distracting noise. Choose from low, medium, or high speeds to create the perfect atmosphere in any room.
Adjustable Light Brightness
With the remote control, you can easily adjust the brightness of your lights to meet your daily needs. The dimming range of 1%-100% ensures that you have full control over the light intensity.
LEARN KEY button
The production settings of this wall ceiling fan remote control kit have been configured and can be used directly. If it fails to work, please use the learn button to re-match.
How to set the function of learning button:
1. Disconnect the receiver's power cord and connect it again to restart the receiver.
2. Please press the "LEARN Button" (it is a small hole in the battery case, you need to use the needle to press it) of the remote control within 30 seconds and keep this action for 3-5 seconds.
3. If you hear your receiver making a beeping sound or the indicator light flashes a few times, the match is successful.
Easy to Install
1. Remove ceiling fan canopy from the mounting bracket
NOTE: Remove power from the circuit. Otherwise power can cause serious injury or death.
2. Installing receiver in ceiling fan
The receiver wires are labelled, and the wires all have the correct color codes. Same color wire connects together Blue to Blue, Black to Black, White to White.
ATTENTION: Wire color maybe different in very old fans
3. LEARN KEY
Use the LEARN key to match the receivers.
4. Install 2 CR2032 batteries
Install 2 CR2032 batteries in the remote, and you can control your fan now.
Please Note the Receiver Size Information
Please double check the size of receiver carefully before order to make sure there is enough space in the canopy of your fan.
Package Includes
1 x Remote Control
1 x Receiver
1 x Wall Mount
6 x Wiring Cap
2 x Screw
1 x User Manual
Product Specifications
- Operating Voltage: 110V
- Require Battery: 3V battery
- Standby Power consumption: <0.5 W
- Remote Control: RF 303.9Mhz
- Remote Control Range: 60 ft
Preston D. Robinson
Reviewed in the United States on February 9, 2025
This is a great remote control option for a ceiling fan. If you’re looking to improve on this product may be considered making the buttons glow in the dark. Overall I am pleased and will look for other products from this company to try and hopefully use.
nofate301
Reviewed in the United States on January 11, 2025
This worked perfectly and it absolutely is worth the money. Installation was straightforward and I had no issues except some of the more normal issues with installing a brand new fan into an old space.The only problem was the pairing process described in the app and the instructions were not complete. For SOME devices, you have to turn things off and on(multiple times, the bulbs for example). But this item doesn't have the same instructions.Another reviewer left the following and it worked perfect for me and I wanna include it here in case another person comes along and has the same issue.To put the device into "pairing mode" meaning ready to join the app, do the following:1. turn off power to the fan controller wait 5 seconds.(this means cut the power completely. If it's on a switch nearby just turn it off, if the fan isn't on a switch, you can also use the breaker the fan is on in a pinch)2. After you wait 5 seconds with everything off, turn power back on and press and hold the fan 0 button(Or if you want to say the fan off button) for 5 seconds the light(s)(not some hidden lights or anything, literally the lights that the fan has for illuminating the room are going to blink) on the fan will flash twice (its now in pairing mode)3. add it in the app
Joe Bracewell
Reviewed in the United States on March 7, 2024
I looked hard at the WiFi controlled universal fan controllers and selected this one for several reasons. The advertisement clearly states that the controller must be initially connected to a 2.4 GHz WiFi for set up. After installation I was unable to get the controller to work with my WiFi which is a 2.4/5 GHz unit and I have many Wyze and other 2.4 GHz items connected to with no problem. I then emailed customer support. It turns out that in-order to connect to a WiFi you have to start with a 4 GHz network not a 2.4 GHz network. Now if I had only wanted a remote controlled fan I could have purchased many other controllers for about $10 less but I really wanted a WiFi unit, however, not sure it is worth the effort to get the ladder out (ten foot ceilings) and remove the controller then have to go back later and reinstall a unit that will work on a 2.4/5 GHz WiFi. Very disappointed in what appears to be a good looking unit that works well as a simple handheld remote. Paragraph from the Amazon Web Site: ❤ WIFI Voice Control & APP Support --- Compatible for Amazon Alexa, Google Assistant, can voice control ceiling fan light; APP Support: Ceiling fan Remote control and receiver for iOS and Android mobile apps. Download and Open “Smart Life” Mobile App. ★NOTE: when you choose the router connected to the mobile app, please select the 2.4G network. Don't choose 5G or 5.8G network. Otherwise, the device may not be able to connect to the APP.
GS Review
Reviewed in the United States on November 13, 2024
The light button on my hunter fan remote was dying. I called Hunter fan to try to get a replacement, but they said that they didn’t carry it any longer. They told me to go search online for a replacement. I found this one and gave it a try and it worked fine. I was hoping that I could just use the remote as a direct replacement, but that didn’t work. So I had to replace the wireless controller module that was included with the remote and it worked fine once I replaced it. Overall, it’s much cheaper than replacing the whole fan.
Matthew S.
Reviewed in the United States on July 11, 2023
If you ordered the SS-T28 (black remote, black receiver) system, read on. The system works well, but there were a few things to be aware of. As noted, the remote does not come with the battery. You'll need a CR2032 coin battery. Second, if you're installing more than one in close proximity, you'll need to follow the instructions on how to properly pair the remote with the receiver. The instructions are almost fully accurate, but leave out one very critical piece of information. Prior to pairing, you need to take the back cover off the remote and slide the pin from the unlocked to the locked position. Then turn off the fans you don't want to pair with (turn off the wall switch, assuming you have a wall switch, otherwise go to the circuit breaker). Then turn off the fan you do want to pair with for 5 seconds (again, using the wall switch), turn it back on with the wall switch, then push the "LEARN" button inside the back of the remote. Repeat this for every fan you want to install. The instructions left out the critical part about sliding the pin to the locked position. If the pin is in the default, unlocked position, the remote will pair, but it will also control multiple fans. And I suppose if you want one remote to control multiple fans, that's the way to do it. I emailed the email address in the instruction guide for support and they replied within 24 hours with exact instructions. So -1 for not having it in the manual and sending it in a default configuration that isn't as useful, but +1 for being quick to clarify.
Li shopper
Reviewed in Canada on January 21, 2023
Purchased to replace the mower in a hunter ceiling fan/light. So far it is working as it should and I didn’t hear much cursing while he was installing it, lol!
Maria
Reviewed in Canada on November 29, 2022
My fan stopped working due to a power surge. This was the replacement part I needed and works great!
Jose R.
Reviewed in Mexico on October 27, 2022
Buena calidad !!! Llegó en tiempo y forma
alan g
Reviewed in Canada on January 11, 2022
Couple of things with this order. First is the wiring diagram didn’t match the OEM so I had to sort of mix and match. Everything worked out but it’s always a pain when having to work over your head.The second thing is that I was told I received a gift for my purchase but when I hit the “button” it just added the item to my cart. So no freebie, but whatever.
Recommended Products