Your cart is empty.
Your cart is empty.Product Description
Water-Based, Rubberized, Non-Skid Coating
Add traction to any concrete, fiberglass, wood, metal, or previously painted surface with Tuff Coat.
Tuff Coat is feet & bikini friendly!
Feet & Bikini Friendly
Tuff Coat is created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules, making it a feet & bikini friendly finish.
Flexible & Durable
Tuff Coat is a single component, flexible, water-based non-skid coating designed to create a long-lasting non-slip finish.
Apply By Roller Or Spray
Tuff Coat can be applied with Tuff Coat textured rollers or with a low-pressure hopper gun or commercial texture sprayer for larger applications.
UV & Chemical Resistant
Tuff Coat is a UV & chemical resistant product, making it a great, long-lasting choice for both indoor and outdoor applications.
UT-80 ADHESION PRIMER
is a 2 component water-based epoxy primer/sealer that can be used on concrete, wood, fiberglass, and previously painted surfaces to promote adhesion between the substrate and Tuff Coat. UT-80 Adhesion Primer can be applied to damp concrete surfaces following proper application procedures. UT-80 Adhesion Primer is compatible with all Tuff Coat rubberized non-skid coatings.
STANDARD APPLICATION GUIDE
Fiberglass, Concrete, Wood & Previously Painted Surfaces
- 2 Coats of Tuff Coat Rubberized Non-Skid Coating
- 1 Coat of Tuff Coat UT-80 Adhesion Primer
- Fiberglass, Concrete, Wood or Previously Painted Surfaces
UT-95 METAL PRIMER
is a fast drying, single-component, water-based, corrosion inhibiting primer that's designed for use on interior and exterior metal application that is compatible with Tuff Coat rubberized non-skid coatings. The product chemically etches for a tighter bond on clean, bare steel or aluminum surfaces.
METAL APPLICATION GUIDE
Bare Steel & Aluminum
- 2 Coats of Tuff Coat Rubberized Non-Skid Coating
- 1 Coat of Tuff Coat UT-95 Metal Primer
- Metal
Jordan N.
Reviewed in the United States on March 5, 2025
Awesome product. Had a little mix up with the color, customer service 10/10!
john hallmark
Reviewed in the United States on September 29, 2024
I like that it's water based, yet still provides a strong coating. There is a lot of grit in this product to provide the non slip finish. Stir the product every few minutes as you apply it. If you don't, the textured material will settle on the bottom.
Christine Kinter
Reviewed in the United States on June 17, 2024
It looks thick but you can still see light spots even after 2 coats.
Foghorn
Reviewed in the United States on June 14, 2024
There is no info on the tape to use , I used two different tapes, one was a heavier and one a light painters tape from a hardware store. The product released the tape adhesive and bonded it to the gelcoat, it also lifted 5 day new gelcoat. Sanding it out is hard because a narrow space and don't want to lift non skid up with abrasive tool. Acetone, xylene, naphtha will not lift it. Theses chemicals help with tape removal but not adhesive. I contacted the manufacture but all I heard was crickets. Placing new gel coat on I believe would be a failure you can't bond polyester to epoxy based material. A safe assumption would be the tape adhesive has epoxy properties now. I had the primer on for 14 hours they say 6 hours minimum 24 ideal. I placed three coats of non skid on which took 3 hours. Someone else must have had this problem. The tape used must be highlighted before use or warn of this. Im assuming I will have to used an epoxy base material to re-coat. Not sure no one has contacted me. Bummed out to the max. Help would be nice.
josh
Reviewed in the United States on March 17, 2024
Great product and extremely tough. Prep work is key. I applied it with a roller and brush ensuring each coat was not too thick. I found the best way to apply it was to mix it within the gallon can with a electric mixer. Then I poored just enough into a paint tray for spreading with a roller. I continued to remix the gallon can before dumping more in the paint tray. I painted the interior of my Lowe Roughneck 2070 as well as the tops of the float pods. It took about two and a half gallons for two coats.
MuddyBoots_Mama
Reviewed in the United States on September 8, 2023
This paint is absolutely amazing the primer was purchased to go with it and it covered over my truck with ease. The paint went on super easy with a great texture I know this product is more made for swimming pool walkways playground equipment Etc but I went on conventional and I painted my entire F-150 making its appearance look absolutely amazing while increasing the durability of my truck helping prevent rust while covering up all the old dings and dents and with it being a water-based paint clean up was a breeze. 100% recomend for whatever your next painting task is with many colors to choose from and great customer service.
Ayo Abdullah
Reviewed in the United States on July 1, 2023
This product has to be continuously stirred at every application point for even distribution. It has good coverage and I was able to get the bottom half of my "tiny home" done in about 2 hours with 2 coats. I was hoping it would stretch for 3 but I'm clumsy...spills happen. It's definitely a quality sealer and with a little effort acetone cleans it off of most things easily. I will be buying another gallon for the top half next week. BEST PART: THE UV PROTECTION IS REAL. Took the temperature inside down immediately. Of course opting for lighter colors optimizes this feature. And yes I am a regular consumer not a sponsored spokesperson for the company. I paid for this myself. Highly recommend if you want slot of bang for your buck. The only reason I gave it 4 stars is because a gallon of paint is supposed to cover 350 square ft one time and $100 is a lot for a gallon of paint.
Aneta Rusek
Reviewed in the United States on April 24, 2023
The media could not be loaded.
Recommended Products