Your cart is empty.
Your cart is empty.Pcv Valve
JOHN D.
Reviewed in the United States on January 9, 2025
Looks like it. Hopefully last like the original
JOHN D.
Reviewed in the United States on January 9, 2025
Looks like it. Hopefully last like the original
CMac
Reviewed in the United States on January 11, 2025
Real deal PCV. The internal spring and plunger fit tight and sealed properly. Aftermarket PCV may not be as exact, on the Prius the installation can be an involved process.Don't take chances, do it right the first time.
CMac
Reviewed in the United States on January 11, 2025
Real deal PCV. The internal spring and plunger fit tight and sealed properly. Aftermarket PCV may not be as exact, on the Prius the installation can be an involved process.Don't take chances, do it right the first time.
Charles Hampton
Reviewed in the United States on September 8, 2024
Nothing better than an original part for replacement of a bad PCV valve. Restored power and fuel economy.
Charles Hampton
Reviewed in the United States on September 8, 2024
Nothing better than an original part for replacement of a bad PCV valve. Restored power and fuel economy.
bal_ago_nao
Reviewed in Japan on May 28, 2024
早く届いて助かりました
bal_ago_nao
Reviewed in Japan on May 28, 2024
早く届いて助かりました
勝二 祐二
Reviewed in Japan on March 25, 2024
トヨタ共販でなくても買えるなんて便利ですね
勝二 祐二
Reviewed in Japan on March 25, 2024
トヨタ共販でなくても買えるなんて便利ですね
高橋
Reviewed in Japan on February 8, 2024
ボルト部に緑のシール剤塗ってあり、交換したPCV バルブを洗浄クリーナーで洗って乾かした後に、振って中のバルブの音を新品と比べた結果あまり変わらなかったので、新品の方を内側外側口に加えて吹いて確認しました。ボルト側からは空気は通るが反対側は通らなかったので、交換しました。今のところ問題なく絶好調です。
高橋
Reviewed in Japan on February 8, 2024
ボルト部に緑のシール剤塗ってあり、交換したPCV バルブを洗浄クリーナーで洗って乾かした後に、振って中のバルブの音を新品と比べた結果あまり変わらなかったので、新品の方を内側外側口に加えて吹いて確認しました。ボルト側からは空気は通るが反対側は通らなかったので、交換しました。今のところ問題なく絶好調です。
fawaz alshamsi
Reviewed in the United Arab Emirates on January 17, 2024
ممتاز جدااااا يعمل على كورولا 2013
fawaz alshamsi
Reviewed in the United Arab Emirates on January 17, 2024
ممتاز جدااااا يعمل على كورولا 2013
Happy Camper
Reviewed in the United States on April 29, 2024
The task, which was initially expected to take only 5 minutes, unexpectedly consumed 3 hours of valuable time. This prolonged duration was primarily attributed to the inadequate engineering and design of the PCV valve location by Toyota. However, it is important to note that there were no issues with the product or the seller; rather, it is the engineers who should be held accountable for their shortcomings.
Happy Camper
Reviewed in the United States on April 29, 2024
The task, which was initially expected to take only 5 minutes, unexpectedly consumed 3 hours of valuable time. This prolonged duration was primarily attributed to the inadequate engineering and design of the PCV valve location by Toyota. However, it is important to note that there were no issues with the product or the seller; rather, it is the engineers who should be held accountable for their shortcomings.
Ewaldys Yepez Escobar
Reviewed in the United States on April 28, 2024
Ewaldys Yepez Escobar
Reviewed in the United States on April 28, 2024
Kev In
Reviewed in the United States on August 11, 2023
Great replacement for PCV valve on a toyota prius, if the car is getting worse fuel economy...this would be one of the top fixes.
Kev In
Reviewed in the United States on August 11, 2023
Great replacement for PCV valve on a toyota prius, if the car is getting worse fuel economy...this would be one of the top fixes.
Scott
Reviewed in the United States on July 17, 2023
The part itself is great. OEM Toyota. It's tough to get to it on a Gen 3 Prius - dead center of the front of the motor, directly under the intake manifold. You'll need a deep(ish) 22mm socket. The hose that connects back to the block just slips off fairly easily.At 150K on my car, I found it easiest just to pull out the air intake, throttle body, and intake manifold. It's a great opportunity to clean out the manifold (which - if you're replacing the PCV valve you'll likely want to do). Consider having some bore cleaning brushes (get a set at Harbor Freight) on hand.
Scott
Reviewed in the United States on July 17, 2023
The part itself is great. OEM Toyota. It's tough to get to it on a Gen 3 Prius - dead center of the front of the motor, directly under the intake manifold. You'll need a deep(ish) 22mm socket. The hose that connects back to the block just slips off fairly easily.At 150K on my car, I found it easiest just to pull out the air intake, throttle body, and intake manifold. It's a great opportunity to clean out the manifold (which - if you're replacing the PCV valve you'll likely want to do). Consider having some bore cleaning brushes (get a set at Harbor Freight) on hand.
Paul
Reviewed in the United States on November 20, 2023
The media could not be loaded.
Paul
Reviewed in the United States on November 20, 2023
The media could not be loaded.
Recommended Products
$22.53
$ 10 .99 $10.99