Your cart is empty.
Your cart is empty.UX200 SE a RGB lighting CPU cooler comes with the high Air Flow blades and u-shape copper heatpipes. Built-in a RGB LEDs delivers a vibrant lighting effect that also supports motherboard sync. Compatible with universal Intel and AMD Socket. P/N: CL-P105-AL12SW-A COMPATIBILITY: Intel LGA 1851/1700/1200/1156/1155/1151/1150 AMD AM5/AM4/FM2/FM1/AM3 plus /AM3/AM2 plus /AM2 DIMENSION: 122 x 61 x 156.2 mm ( L x W x H) HEATSINK MATERIAL: Aluminum Fins, Copper Heatpipes FAN DIMENSION: 120 x 120 x 25 mm ( L x W x H) FAN QUANTITY: 1pcs FAN SPEED: PWM 800 ~ 1800 RPM RATED VOLTAGE: 12V START VOLTAGE: 6. 0 V RATED CURRENT: 0. 3 A POWER INPUT: 4.32 W AIR FLOW: 62.72 CFM AIR PRESSURE: 1. 47 mm-H2O ACOUSTICAL NOISE: 25.0 dBA LIFE TIME/FAN LIFE TIME: 30, 000 hours COOLING POWER: 170 W.
Anthony
Reviewed in the United States on May 17, 2024
Great budget cooler. It was a tight fit on my AMD. If you follow the instructions and put one side on then rock it flat, then push down on the other side, it went on pretty smooth. I didn't use the provided thermal paste. Fan works great, LEDs are bright. It is flashing a little bit but that might be my ARGB controller. Also did not arrive damaged at all.If you are looking for a good budget option, this is it.
Wayne
Reviewed in Canada on December 11, 2024
This is a universal air cooler that works on AMD and Intel Motherboards.If using on intel, you do not need to use the RGB connector as it is built in to the power plug. The fan speed is controlled by the motherboard based upon temperature. My Intel I7 is holding under 30 degrees C which is very good.I did have to switch the cooler hold down plate but all the parts to do this were included. Completely satisfied with the noise level and cooling ability. Recommended
Warren B Futrell
Reviewed in the United States on November 18, 2024
I purchased this product to fix high CPU fan speeds when doing strenuous things like booting the system or opening Firefox. :) This was the cheapest CPU tower cooler I could find from a brand I trust that specifically mentioned support for socket FM2.The system in question has an AMD A10-6700, which is a 65W processor. In order to install this CPU cooler, I had to remove the motherboard from the case in order to access the mounting tab on the same side as the CPU power socket. It's a somewhat roomy case, but not that roomy.After installing the CPU cooler, the fan is now at a low RPM with no ramp ups. The RGB is a nice touch, but wasn't a requirement. The RGB fan isn't too bright, but is bright enough to illuminate the top part of the case.
Customer
Reviewed in Canada on October 3, 2024
This fan looks great and was easy to install. I was upgrading from my stock fan and this one was inexpensive and had good reviews. Now my computer has even more RGB.
Erik
Reviewed in Mexico on October 22, 2024
en todo este tiempo funciona de maravilla y mantiene con bnuena temperatura a mi cpu i5 11400f
Valentina Paredes
Reviewed in the United States on January 11, 2024
The Thermaltake UX200 SE 5V is a budget-friendly CPU cooler that offers decent performance and stylish RGB lighting. Here are some of its key features:Design: The UX200 SE 5V features a compact tower design with a 120mm PWM fan. The cooler is compatible with most Intel and AMD sockets, making it a suitable choice for a wide range of PC builds.RGB Lighting: This cooler comes with addressable RGB lighting on both the fan and the top cover. The lighting can be customized using the included software, allowing you to match it with your other RGB components and create stunning lighting effects.Performance: The UX200 SE 5V offers decent cooling performance, especially considering its affordable price point. It can handle CPUs with TDP (Thermal Design Power) of up to 130W and keeps the temperatures under control during intense gaming or CPU-intensive tasks.Easy Installation: The cooler comes with an easy-to-use mounting system that simplifies the installation process. The package includes clear instructions, making it accessible even for novice PC builders.Noise Levels: The included 120mm fan operates quietly, thanks to its low noise level. This ensures that the cooler won't contribute to excess noise in your system, allowing for a more enjoyable gaming or working experience.However, there are a few potential drawbacks to consider:Cooling Capacity: While the UX200 SE 5V offers reasonable cooling performance, it may struggle to handle extremely high-end CPUs or overclocked setups. If you have a high-powered CPU or plan to do heavy overclocking, you may want to consider a more powerful cooling solution.Software Limitations: The software provided for controlling the RGB lighting is somewhat basic compared to some other RGB software options. It lacks advanced customization features found in more premium coolers.Overall, if you are on a budget and looking for a visually appealing CPU cooler that offers decent cooling performance, the Thermaltake UX200 SE 5V is a solid option. However, for heavy-duty usage or advanced customization features, you may want to explore higher-end alternatives.
L
Reviewed in the United States on September 22, 2023
I love this for the $23 I paid. It looks great (RGB header), works well (hugely better than the stock cooler), and I adore that the fins are sanded down so they don't cut you up while trying to mount it.Mounting on AM4 was easy, didn't need to do anything weird, unlike with the Coolermaster heatsink I had to use on another system due to size constraints.The fan has thin rubber between the fan body and the heatsink, which helps a bit with noise. It's "quiet," not epically so, but again, much better than the one on the stock cooler (or the similarly priced Cooler Master) and more premium than I was expecting at this price. The RGB looks good on the blades. The blades are spaced close together in what looks like a high static pressure type of arrangement, so I hope that was to help it do better once a layer of dust starts to accumulate. Thoughtful on their part if that's why.The heatsink has four heat pipes. This is not a Noctua D15, or an AIO of meaningful size, but it performs well enough with a 130w CPU under load that it's not loud and frustrating. Again, for $23, it's fantastic and punching above its weight. I don't OC, so thermal headroom for me is about noise and staying in boost frequency, more than being able to up voltage.The little installation guide was friendly and helpful.Overall, highly recommended at this price, and will be buying it again for other systems.
Test Pilot
Reviewed in the United States on September 12, 2023
Price was fantastic at $16.00. Construction and number of copper tubes was perfect. Sized just right to fit AMD and clear memory on MSI Pro Carbon 970 MB. Problem was with cheap clamp undersized. It was too late for me to know to bend the bracket open with pliers prior to pushing down hard enough to almost break the socket. I had pictures to post, on the computer I was fixing. But after smashing the bracket down. Removing it, bending the arms enough to actually engage without breaking the MB. Well, I did break the MB somehow. First time in 40 years of professional repair that I made a computer not work installing parts. Was changing fan due to failing bearing actually slowing RPM. If it did not have a better heat sync system I would have probably just swapped the fan, but I did not! The computer never started after that and I am bummed. Fan spins though, the heat sync looking good, and now the bracket fits properly. Just not from the box. Also, I had 16 million or whatever RGB colors, but this fan needs a different interface, so it just displays a rainbow brite assorted flavor color band. No selection when direct powered from 4 pin system connector.
Carlos Terán
Reviewed in Mexico on January 20, 2023
Antes que nada, debo de mencionar que el UX200 SE no es complicado de instalar en lo absoluto en boards AMD, todo lo contrario. La fama de complicado de la instalación viene de lo mal explicados que están los diagramas del manual. Antes de instalar, hay que doblar un poco el arnés de metal que se pesca de los ganchos del CPU, no cuando ya está sobre el motherboard. Si haces esto, el proceso de instalación tarda sólamente un par de minutos y no ejerces ninguna presión sobre el motherboard, como he visto en algunas reseñas. El paquete del UX200 SE incluye un arnés de plástico para motherboards Intel, que no necesitas en los de AMD (espero que no hayas tirado los ganchitos de plástico que vienen en la caja del CPU Ryzen, porque si no, vas a tener que comprar unos). El disipador de una torre no es excesivamente pesado, y el ventilador es muy efectivo. Es grande, y requiere que tu case tenga espacio para colocarlo BIEN y que sobre distancia entre la porción superior del disipador y la pared del case. El RGB se puede controlar sin problema desde tu motherboard usando tu software normal, con el conector de 3 pines. Con respecto al ruido: el ventilador es muy silencioso, pero la velocidad depende totalmente de que tan bien tengas el flujo de aire en tu case. Usualmente es menos de 30 decibeles. Las temperaturas en mi Ryzen 7 5700g antes de instalarlo (con el ventilador de fábrica) eran de 50 grados en idle y 80 grados en carga. Con el UX200 SE ahora es de 38 grados en idle y 67 grados en carga máxima. Comentario aparte, utilicé pasta térmica Artic MX-4 porque no confío en las que vienen incluidas, y te recomiendo hacer exáctamente lo mismo. ¿Volvería a comprarlo? por supuesto que sí. Pienso incluirlo en otro build AMD muy pronto.
Mohammed Almansouri
Reviewed in Saudi Arabia on December 29, 2022
This cooler has the most infuriating installation process of anything in my life. Not reccommended. The stock Intel cooler is way better.
Recommended Products
