Your cart is empty.
Your cart is empty.Product Description
Brandon
Reviewed in the United States on February 24, 2025
I used this to bridge the connection of the LCD for my PSP 1000 for the IPS display. I didn't have any issues using this. A quick tip is to cut off the tip of this slightly so it comes out straight. After doing this I applied to bridge my connection and I let it sit for 24 hours. I probably would have dried quicker but I wanted to be sure on this, after 24 Hrs. It was had to the touch and worked.
Aaron
Reviewed in Mexico on February 21, 2025
Llegó sellado y a tiempo pero dañado y chorreado
hb
Reviewed in Canada on January 17, 2025
This product is a conductive paint designed for bridging a small gap between two conductive surfaces that are solidly attached to a substrate - for example the copper trace on a printed circuit board or a flex cable. It adheres very well to the surface it is applied on, and will not easily peel or abrade off. I used it to repair badly worn contacts on the end of a flex cable, an application for which it works perfectly.Most of the poor reviews posted here for this product are simply incorrect, typically for one of two reasons:1. The product was applied incorrectly, resulting in the product not appearing to "dry" after the rated 24 hours. This product is a paint, and is designed to be applied in a thin layer just like paint. It is not supposed to be applied thickly in one coat - if this mistake is made the product will (a) tend to run and (b) will take a very, very long time to dry. If you want to create a thicker conductor, apply several thin layers allowing time for each layer to fully dry (24 h at room temperature) before applying another coat.2. The product is being used for the wrong application. This product is a paint - it is not an adhesive, and it is not a fastener. It cannot be used to attach two objects together when one or both objects are free to move. For example, this product cannot be used to attach two separate wires together, or to attach a wire to a stationary terminal. These types of applications require either a mechanical connection and/or use of solder. This product cannot be used as a substitute for a soldered connection.
Customer
Reviewed in the United States on August 21, 2024
As recommended by other users, I repeatedly added small amounts of the paste, letting it dry for a day between each layer rather than trying to glob it on in one big application. I did not plan to rely solely on it to act as an adhesive, adding a layer of adhesive over the top of the junction to make sure it could not work loose and break the electrical connection. And yes, once dry it did form an electrical connection. It was used to connect a fine wire to a 24volt LED light board.
danfes76
Reviewed in the United States on August 14, 2024
i bougth this thinking that will hold and be strong, but really what this is, its just paint.it will take a big amount of time to cure and will not be strong enough.
José Rubén Arredondo Cabanillas
Reviewed in Mexico on February 13, 2024
El producto me gusto.por qué es parte de mis trabajos cotidianos está perfecto
Mike
Reviewed in the United States on December 13, 2024
Works okay, it is thin as others have written. I used to repair the lands on a printed circuit board.
Customer
Reviewed in the United States on November 8, 2024
I like the precision of the applicator. It works as it should. But the "ink" or "paste" makes this probably useless to you.I got this to help with some old xbox modifiications i like to do. These require bridging a very tiny section between two points. Conductive ink is the best way to accomplish this. But this ink has failed me each and every time.1. seems to spread as it sits which means it's going to end up bridging more connections that we don't want bridged.2. It does not seem to make a good connection no matter how it's applied. Even when i gob it and overdo it it still doesn't work. I got it to work once right away, but later in the day it spread and lost connection and now i can't seem to remake the connection properly. It's very frustrating.3. It dries and requires harsh scrubbing or even scratching with a hot soldering iron to remove. Very inductive Yu's sassss mmm guy
Zaywire
Reviewed in the United States on November 5, 2024
Does what it’s supposed to do.
j.wise
Reviewed in the United States on October 27, 2024
Took days to dry.
Pierre Larin
Reviewed in Canada on October 22, 2024
Pour ce que je voulais faire, ça n’a pas marché.Je voulais me servir de la pâte pour pouvoir coller deux pièces dans mon ordinateur.Cette pâte n’est pas une colle!
Customer
Reviewed in Canada on October 14, 2024
Electrically conductive but did not cure after 24 hours and provided no adhesion
Madhouse01
Reviewed in the United States on November 19, 2023
Used it to repair back glass defroster. The power tab had previously been repaired, and is solid - but after a year of use it no longer conducted 12v to the grid. I cleaned a contact area on grid and on tab, and applied the Silver Glue. As soon as it was applied I checked conductivity with an Ohm Meter, Success !!. Paste is thick and no runs, was easily able to lay a bead and it stayed in place. Temps are in the 50's, and the paste isn't 100% dry overnight. Figure best case, in a day or so it will harden. Worst case, it stays tacky, but don't think I'll have to worry about it liquifying and running off of the repair. Would buy this again, though it would be nice to have instructions written in English
Recommended Products