Your cart is empty.
Your cart is empty. Tendak SPDIF/Toslink Splitter 1 x 3 allows you to conveniently connect up to one SPDIF/TosLink signals(from PC, Apple TV, PS4, Xbox, Blu-ray player, cable box, HDTV etc.) splits to three amplifiers, receivers, soundbar or headphones. It splits audio signal without loss of quality or degradation.
Specification:
Iuput Port: 1 x SPDIF TOSLINK IN, 1 x DC 5V Port
Output Port: 3 x SPDIF TOSLINK OUT
Audio format support : LPCM2.0/DTS/Dolby-AC3
Support signal retiming
Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m.
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine
Support last time working state memory when power off
Max working current: 100mA
Power adapter format: Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/500mA
Package Contents:
1x SPDIF/Toslink Splitter
1x 5V Power Adapter
1x User Manual
Warranty:
1 Year Limited Warranty by Tendak
Paul A.
Reviewed in the United States on March 29, 2024
Are you there to hook up my headphones so I could hear the TV. It was easy to put on. I had good instructions.
TnT
Reviewed in the United States on March 24, 2024
I bought a streaming device for my hearing aids (hearing loss at a young age) so my wife didn’t have to keep telling what was said on the shows and our Sonos speaker was using the optical output. So I purchased a non-powered splitter but the signal to the hearing aid streaming unit was too weak.Bought this unit after doing some research on the streaming devices and it works perfect. You have to plug it in but not a big deal with a simple power strip or the usb on the back of the TV if you have one.
Franco Facchini
Reviewed in the United States on December 3, 2024
I used it for my Jabra TV-streamer+ on my hearing aids. But this product can be used for any device that requires a streaming input different from your primary input. For example, if you use HDMI for your tv sound system, but also want to duplicate the stream to a device that required an optical input.
Vic
Reviewed in Mexico on October 4, 2024
Buen equipo
Jackson B.
Reviewed in the United States on November 16, 2023
This is a splitter that allows the audio (optical video out cable) to be sent to 2 separate devices. The cables in and out of the splitter weigh much more than the splitter, so it might need to be secured to prevent any cable separation. My newer TV only had one audio out slot, so a splitter was needed to operate the sound bar and a Bluetooth device that permits headphones, etc. The splitter requires its own power supply.
Steve Kinkaid
Reviewed in the United States on September 7, 2022
This is now the hub for my growing home theater. I spent too much time adjusting this and that. Now my TV output is split to 5.1 component amplifier, and sound bar, a bluetooth audio transmitter for my headphones. Mix and match of stereo and 5.1 is no problem. I was previously trying to use my component media stereo for this, but then that had to be turned on just to watch tv. I'm sure there are other ways to use this. But very happy with the ease and simplicity of this method.
KD
Reviewed in the United States on September 13, 2018
My mom is elderly and lives with us full time. She is hard of hearing, and we have been at our wits end with having to have the TV so loud. I have been trying forever to find a way to split the ONLY audio out on my TV (optical), so she is able to use headphones/TV ears and watch TV with the family. That way she can control her volume, and we can have the TV at an normal volume in the room. This used to be easy when everyone had cablevision and could use analog connections into the back of the cable box. We dropped cable for Roku and have been looking for a solution since then. I have tried several other optical splitters, but because this one is powered, it truly splits the optical into three separate outputs. We can now have our sound bar, headphones and TV ears for my mom receiving sound, and there is no delay. Your product should be marketed to be sold with all head phones/TV ears since most newer televisions only have one audio out option. I was surprised that even in stores, there were unable to "solve my problem". I know we are not the only people living with someone who is hearing impaired. THANK YOU Tendak!
ksflatlander
Reviewed in the United States on October 8, 2016
I got this to split the signal coming out of my TV to go to my soundbar and to my wireless headphones. Based on the reviews I read, I wanted a powered unit. Couldn't be simpler to use. I put one cable from the tv into the input and then ran from one of the outputs to the soundbar and then another to the headphones. Both work perfectly. I still have another output if I wanted to push the audio to another source.Didn't give 5 stars only because I just got it, so I can't rate reliability or longevity. But so far, so good!
Jack‒retired tech geek extraordinaire
Reviewed in the United States on August 20, 2015
Worked great until it broke. The manufacturer chose the cheapest, tiniest, flimsiest power plug imaginable. Once it came loose, it was doomed. I would have tried soldering the wire into the splitter, but I already had a spare splitter (a better one), so I just threw the broken one in the trash.My advice would be to glue the power plug into the unit before it breaks; preferably while it's new. Goop adhesive works great for this because it not only sticks to almost anything, but it also strengthens the bond so it won't come loose. Of course you don't want the glue to get inside the unit or onto the plug. That's another reason to select Goop, since it's too thick to get inside the plug accidentally.How to apply the adhesive:1. Clean the plastic parts using a Q-Tip with isopropyl alcohol or Goof-off. I prefer Goof-off because it roughens the surfaces for better adhesion. Be sure everything is dry before proceeding.2. Push the power plug adapter firmly into the socket. (Do not apply adhesive before joining the parts.)3. Carefully apply the adhesive around the plug where it joins the socket. Use sparingly, as a little goes a long way.4. Wait 12-24 hours for the adhesive to harden before use.Of course doing this will void any warranty, so ensure the splitter works before modifying it.
Recommended Products
