Your cart is empty.
Your cart is empty.D. Yepes
Reviewed in the United States on February 24, 2025
Great product. As described . Love all the side options available .
kkingsk
Reviewed in the United States on January 21, 2025
I used this to cover a round wood table. When it arrived it was rolled up & I was worried about its ability to flatten out over time. I took seller’s advice and unrolled best I could. I placed curled edges face down on floor & used a blow drier to flatten. To my surprise it took maybe 10 minutes max to get it super flat. It’s been a few weeks & it’s stayed flat, the product is thick/dense, stays in one place on my table & protects my table well. Hardly notice it’s there! Definitely recommend.
Melner
Reviewed in the United States on September 30, 2024
I bought one size for my desk, and one size for my makeup vanity (was actually a teenagers desk, but it had the drawers I needed and looked nicer than other actual vanities.) These are thick, heavy pcs of plastic that look like glass but I don't have to worry about chipping or breaking. They don't move around either. Make sure furniture is completely dry before placement. Try to avoid heat registers or direct sunlight as it can warp or yellow the plastic. The vanity I don't have a choice on, but I still consider it well worth the cost. Very good investment if you're looking to protect new furniture without glass. Delivered on time and well packaged. If I ever need or want another, I'll return to this seller.
Serene Night
Reviewed in the United States on May 8, 2024
This looks really good. There were a couple scuff marks which I was disappointed by but which you can only see if you look carefully. If it doesn't lay completely flat, a bit of heat with the hair dryer on low will straighten it out.
TTJCC
Reviewed in the United States on December 9, 2024
The Clear Table Protector Plastic Tablecloth Cover does a great job of protecting my table from scratches and stays securely in place without slipping. It’s a practical solution for preserving the table’s surface, and I’m happy with how well it works in that regard.However, the material stains very easily and is quite difficult to clean. To address this, I now use it underneath a tablecloth, which eliminates the worry of staining or frequent cleaning. It’s a good protector overall, but better suited for use under another layer if you want to avoid visible stains.
Fan
Reviewed in Mexico on January 12, 2024
Entrega en tiempo, buen material incluye instrucciones
bikramjit singh
Reviewed in Canada on August 16, 2022
I am using this product over 3 months now and it has exceeded all my expectations. It is thick enough to not have any crease/bends. Easy to clean. The size was just perfect for my Dinning Table.No Longer I have to worry about the spills and still can show all the beautiful wood grain underneath. Wish I knew about this product before, would highly Recommend this to everyone.this is 10/10 for me
PrairieSky
Reviewed in Canada on March 22, 2022
Having bought previous from seller material is great and packaging is really good. This was a very large table cover 48x118 inchSadly ends are not quite straight 1/4” off over the 48” endAlso roll was supposed to be 48 but is closer to 48.5 so over hangs.Considering trimming to make it work
Alkus
Reviewed in Canada on December 2, 2021
all good
Dinesh Anthony Ratnayake
Reviewed in Canada on October 17, 2021
We are very impressed with this purchase. It’s thick and sticks to the table very well. It enhances the table.
8Ball
Reviewed in the United States on February 29, 2020
I used this on a custom built office computer desk, that was built from expensive wood and it protected it very well. When I received protective plastic in, it was initially quite tough to unroll it, but once I reverse it from its rolled up side and let it lay flat on my dining room table for a few days, it flatten out just fine. I cleaned it several times to make sure that there was nothing on the side that would be facing down toward the desk surface and made sure it was good and dry.I then polished the desktop with a very good grade of furniture polish, and then with the help of another person we installed it onto the desktop. The easiest way to do this is to start on one side, and then slowly lay it down using either your hand or a squeegee to push out any trapped air bubbles underneath it. It layed down well, and after it was installed, I put my normal desktop stuff down on it (keyboard, mouse pad, etc.) And it lays perfectly flat.It is shinny, but my original desktop's finish is shinny also, so this didn't matter to me. I prefer a gloss or shinny look to the custom built computer desk.I was worried if it would stick to the desk and possibly ruin the original finish, but after 2 weeks of having it on my desk, I lifted it up on the one side and it seemed just fine (did not stick to or make any kinds of marks on the desk's finish.) THIS was my biggest concern about putting any kind of protective vinyl down on this custom built computer desk, but so far, it has not stuck to the desk's surface and has not marked the finish in any way.So overall I'm very satisfied with the product, and I think it does a good job of protecting the desk's surface from scratches. And in my opinion I think its a good quality of vinyl/plastic material and a good thickness (not too thin and not to thick.)
John V.
Reviewed in the United States on September 23, 2018
Recently I put a new bench top in my garage () and in an attempt to preserve it from dust, oil and coffee stains I wanted to cover it but it was not easy to find a cover for a 30 X 96" bench top so it took a lot of searching on Amazon until I came across this one. I needed it fast because I wanted to start putting my tools back on the bench before my wife sees them all over the place and put the marriage in jeopardy so I was happy to find the exact bench measurements offered in this one.It is about 1" over sized and I could trim it but it protects the edges of my bench and I do not mind it hanging off the edge this much since it is clear and not noticeably ugly. Having said that, this is not a heavy duty cover that would withstand heavy work on a bench but I use mine mostly for electronics and I rarely have to drill and hammer things. In any case, I would not mind having to replace it in the future as long as it keeps my bench like new. It comes in a box rolled up tight and for a couple of days it tends to return to the rolled up form but I put it on the bench from the side that it wants to roll downwards so it was pretty much nice and flat right away. A couple of days later and it is now very well formed. I use a soldering mat and a cutting board on the bench and as a bonus, the mat and board stick to this plastic nicely so they do not slide around.I wish I found this product when we bought our kitchen table before we started scratching it with keys and every day use. If you want to preserve your table or any surface from every day wear, this product is highly recommended.
Recommended Products