Your cart is empty.
Your cart is empty.Product Description
SWANLAKE 200cc Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer,Brake Fluid Extractor
Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more.
Heavy-duty construction allows for strength and durability.
The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose.
The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger.
Leslie Chase
Reviewed in the United States on February 20, 2025
I use these to mix 2cycle oil, and to drain my backpack blower and weed trimmer fuel tanks, and draining fuel from the snow blower as well. Also, removing any fluids in your car, like brake fluids etc.
Nicholas Thompson
Reviewed in the United States on February 17, 2025
Best/handiest fluid sucker I've ever used in the shop. Awesome for engine oil samples, swapping oil in differentials and Haldex AWD which don't have drain plugs. I use this more and more over time.
Customer
Reviewed in the United States on February 17, 2025
it works just as it should, but it would be really helpful if there was a shut off valve for the tube to help keep the fluid inside the extractor which typically just makes a mess. other than that, it’s been a decent product.
Ron
Reviewed in Canada on February 14, 2025
Great for extracting brake fluid or even bleeding brakes nice addition to tool box for sure
Nader Hammoud
Reviewed in the United States on January 31, 2025
I go this to replace my transmission and differential oils, first look I saw lots of silicone inside the plunger, this needs to be wiped clean properly before using it with oil, otherwise you risk contaminating your transmission and wouldn’t be good.I also bought a separate 1/2” hose that I can use with the provided adapters, and heat bent one of the hoses to help reach bottom of differential.It is a bit bulky if you don’t have lifts for the car. So you might want to get the 200ml instead of the 1500ml one if you are only using regular jacks nd slipping yourself under the car.
PT
Reviewed in the United States on January 3, 2025
I loved this product because is so helpful you don’t need to drain brake or steering wheel fluid you just extract with it. Fits very well good quality, stable and what a great idea.
Nfrkois
Reviewed in Saudi Arabia on May 4, 2024
ريحني كثير في تغيير زيت الدفرنسات والدبل والفرامل جودته ممتازة
Sam
Reviewed in the United States on December 27, 2024
Does what it needs to do. Can be used for lots of things, such as cleaning, picking up liquid in tight spaces, and using is a a way to transfer liquid from one container to another.
Ninh
Reviewed in the United States on December 21, 2024
Works great and simple to use, easy to clean. Pump out my old ATF oil from a small motorboat pump system.
Michael C.
Reviewed in Australia on November 19, 2024
Needed a large volume transfer device in my kitchen. Make my own liqueurs and must avoid any sediment being transferred to the final container. The SWANLAKE Fluid Extractor was the answer. Well, its a very large volume cylinder, the plunger is an easy grip, the intake tubes are large enough to allow rapid filling. The tubes can be positioned to avoid sediments if needs be. And at the end, its easy to clean. Its so useful I have to guard against taking it out to my workshop where it would also be very useful; but then it could not likely return to the kitchen. So another one for my workshop/ garage is in the wind. A great purchase and depending on your needs. This fluid extractor could easily solve your problems - big or small. Check it out.
Weistek
Reviewed in the United States on April 2, 2024
I was very hopeful about this product but only used one time to remove gas out of my generator. I was using the plunger carefully and slowly but after the first two successful extractions, the rubber o rings started to bind up inside of the tube making it very difficult to move the plunger up or down. Also, the gas started leaking out due to back pressure moving the plunger back down on it's own. I had to hold it very tightly to prevent it from releasing the gas. I noticed there was a lot of white grease applied to the o rings by the factory but the o rings were so loose and flimsy that they wouldn't stay in position making the product unusable. I wish this worked better because I still need to extract more fuel.
EdmondWunCheungTam
Reviewed in Canada on September 2, 2023
Very,very very hard to push, I am 60 years old how can I under my truck pump oil in to transmission.
José joel Escobedo treviño
Reviewed in Mexico on September 18, 2023
Buena herramienta, muy util y ahorras tiempo de trabajo, lo he usado para extraer liquido de frenos y para rellenar de aceite transmisiones manuales.
Recommended Products