Your cart is empty.
Your cart is empty.Product Description
Aluminum alloy shell/Fashion and portable
Package Included
1 x M.2 NVME/SATA to USB 3.1/3.2 Type-C SSD Enclosure
1 x USB C to USB C Gen2 Cable (10Gbps)
1 x USB A to USB C Cable (10Gbps)
2 x Thermal Pad
1 x Screw Set : 2 screws (1*Scew A and 1*Screw B)
Notice：Both cables up to 10Gbps transfer speed
The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included.
SSK Type C M.2 NVMe/SATA PCIE Tool-Free SSD Enclosure
SSK M.2 NVME SSD Enclosure adopts high performance controller chip(JMS581DL), up to 10Gbps high-speed data transmission. 1GB file only takes1 second. SATA-based B&M Key M.2 SSD read/write speed up to 6bps. Complies with UASP, Trim which can effectively improve the speed and extend the longevity of SSD.
Attention: It supports PCI-E based M key & (M+B) key M.2 NVME and SATA SSD up to 4TB; M.2 PCIe AHCI SSD or MacBook original SSD are not supported!
- Tool-Free,No tool required
- Interface type: M.2 NVME PCIe to USB 3.1/3.2 Gen 2
- Support SSD Drivers Size: 2230, 2242, 2260, 2280mm
- Case Size: 115*39*11mm
- Cable 1 : USB C to USB C(150MM)
- Cable 2 : USB3.0 AM to USB C(150MM)
- Color: Grey+Black
Main Features
Easy Installation & Extreme Data Transfer
Plug and play, no driver required. With USB 3.1/3.2 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 3.1 Gen2 and USB 3.1 up to 10Gbps.
2* Thermal Pads included for Excellent Heat Dissipation
Everything you need in one package, included 2* thermal pads, you can paste one thermal pad or two side by side to achieve rapid heat dissipation.
Fashion Design
Adopts aluminum alloy shell, Slim design, and excellent heat dissipation, be portable and easy to carry.It will be the best choice for trip and business travel.
Main Features
Tool-free design and fastest USB storage speeds!
Tool-free design and no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports.
Supports Plug & Play and Hot-Swapping.
NVMe and SATA SSD Compatibility
- Compatible with M.2 NVMe and SATA NGFF SSDs
- Not compatible with B Key Connectors. M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs
- NVMe SSDs use exceptionally high performance storage media that will run hot when under load.
- The rubber SSD retention peg can be moved to support multiple M.2 NVMe SATA NGFF SSD lengths including: 2280, 2260, 2242,2230.
Multi OS Compatible
Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.Blue Indicator is always on when plug in, and flash when read or write data.
Installation Instructions
1. Please slid to open and take the middel frame out of the enclosure.
2. Place the SSD at and angle of 45 degress into the PCB.
3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure.
4. Put the thermal pad on the SSD,leave the sheet on the thermal pad.
5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked
Note:
１.After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
２. Pless kindly noted our item work well on all brands NVME M.2 2230, 2242, 2260, 2280mm SSD up to 4TB including Intel 600p, 660p, Sumsung, WD, Crucial etc. If any question you have, please mail us, we will help you well.
３.Not compatible with MacBook original SSD．
Thank you for your notice!
JamB
Reviewed in the United States on March 1, 2025
I do not use this a storage device. I use it to image NVME drives or to copy data to (or from) a drive that is then used elsewhere. For that purpose it works very well, is easy to use, and is a good value. When not being used it is small and compact enough to store out of the way.
Thomas Schluet-Schluetenberg
Reviewed in Germany on February 17, 2025
Das Produkt wurde rasch geliefert und funktioniert wie angegeben. Die Anbringung der Kühlung durch Ankleben ist nicht ideal, wenn man die SSD nicht dauerhaft im Adapter belassen möchte.
khaos
Reviewed in the United States on February 15, 2025
Its a nice design, pretty small and the cause feels sturdy. I used it in conjunction with Samsung evo980 when upgrading the older nvme drive in my laptop. It worked great with Samsung Magic, once I did the transfer and made the update windows loaded fine.It does get kinda hot but thats probably a good thing, it means the heat transfer from the chip to the case is working.The only downside is that the usb-c plug to the case doesn't hold it as well as the end that goes into my laptop does. I accidentally bumped it during the data transfer and it disconnected. I had to restart the drive migration. But besides that it worked well
Brad Bogue
Reviewed in the United States on February 12, 2025
It is simple to install the SSD then it operates just like a USB drive. Excellent product, good delivery, and good price. I had this old SSD from a Dell computer damaged in a move. I transfered the SSD to the enclosure and now it is usable.
Andrea
Reviewed in Italy on January 30, 2025
Da possessore della versione precedente che non supportava i dischi SATA M.2 sono molto soddisfatto del prodotto, lo consiglio.
Eray Aydin
Reviewed in Turkey on September 8, 2024
Kaliteli, sorunsuz çalışıyor
Bug Zapper
Reviewed in the United States on November 30, 2024
EditMy media PC with full 3.2 USB ports locks up with the SSK, AND several other low dollar NVMe 10Gbit enclosures. I was blindsided with these adapters thinking China had a handle on hardware compatibility.My Mini S12 with intel cpu NOT compatible with these 3.2 enclosures but fine with any other SSD external drives.After several swaps, the issues surfaced. I apologize for this half baked review. As the 980 Pro runs hot , I still use usb fan to cool the SSK case, just like your motherboard C drive. I have two game PCs that work fine.I'll keep my SSK as a spare, loaner; I'm moving on to the ones that shut flat or stand up with built in fan that does NOT bunch or roll up your TIM pad needed to cool a closed case.If your case and choice of NVMe fails to quick format or disconnects during file transfer and fails to complete CrystalDiskMark, your chipset not compatible. Are you lucky punk?Original post;Does not work with Samsung 2T 980 Pro. What a waste of time! Just found an early review of same issue with the 980 Pro 2t. This NVNE is very hot running, will need a fan cooled case!Will not even format without locking up my CPU. This does work with my older Non Pro 980 500 Meg, no issues.My 980 2T Pro works fine on my older JMS 583 based open frame USB dongle.
Ruber Dan Cazares Herrera
Reviewed in Mexico on August 16, 2023
Práctico, buena calidad
MikeCheck
Reviewed in the United States on March 27, 2023
I recently purchased the SSK Aluminum M.2 to USB NVMe SATA SSD Enclosure Reader from Amazon for $18.99, and I must say that I am quite impressed with the product. The enclosure works beautifully, just as advertised. However, some people complain about the top speed of the device not reaching full potential, but it's important to keep in mind that it states the top speed is 10gb/s, and the drive needs other efficient hardware to reach full potential.(I just noticed in my pic the particular PC I am using has a USB-C that I am not plugged in to which would speed this drive up, it is nice to have it be able to plug in both types)While some people have complained about the tiny thumb screw, I believe it's understandable given the size of the drive and enclosure itself. The product is priced reasonably at $16-20, so I don't think people should be whining about it. The USB-A and C cables included with the product worked just fine for me, although they are a bit short.I purchased this product to expand an additional SSD hard drive in my computer that I installed games on, and it was great. I was able to copy my existing SSD drive onto a new expanded size Drive and then place what was in the enclosure in my computer. I took out the SSD that wasn't my computer and now I have a massively sized external hard drive to play around with. It was definitely worth the money.One thing to note is that unlike a thumb drive, files that are deleted do not permanently disappear. They are put in a trash can, and you can restore or undelete the file by pressing Ctrl Z.Overall, I'm quite happy with my purchase of the SSK Aluminum M.2 to USB NVMe SATA SSD Enclosure Reader. It works great, is slim and easy to use, and has a solid drive holder that is not going to slip or come loose. The holding screw is a bit tricky to install, but once it's done, it's great. I would recommend this product to anyone who needs a slim M2 enclosure for their backup or just a huge USB thumb nail type drive with tons of storage.Make sure to use the "Safely remove hardware" function to unplug this, or turn the PC off before unplugging to prevent corrupting the drive.
Dan
Reviewed in Canada on May 8, 2022
sleek design and good heat dissipation but man does it get hot because of that. NVME drives produce a lot more heat than you think. still a very nice design and I'm very happy with everything besides the overly bright blue activity light that feels like a small flashlight
Recommended Products