Your cart is empty.
Your cart is empty.Product Description
Spurtar 175A Battery Connector, 1/0 AWG Battery Quick Connect Disconnect Wire Harness Plug Kit for Recovery Winch or Trailer, 12-36V DC, 2 Pack
1/0 wire gauge: 12-36 Volts DC; capacity: 175 Amps.
Spurtar battery quick connector provides a simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector.
Made of sturdy housing with fitted rubber boot covers; allows for battery quick connect/disconnect from winches, trailers, or other electrical devices.
The Spurtar 175A towing winch quick connect systems includes 2 quick connect plugs that work with 1/0 AWG wires, allowing quick and easy connection (and disconnection) of towing winches, forklifts, cranes, lathes, trolling motors, lift trucks, battery chargers, floor scrubbers, power inverters, custom kits, and many other electrical devices that require high current.
175A Battery quick connector Kit/winch recovery kit
Specifications
Material: PC fire-retardant materials+stainless steel
Contact material: copper silver
Rated Current: 175A
Voltage: 12-36V
Gauge (AWG): 1/0 gauge wire
Voltage Current: Rated at 600 volts DC or AC
- Package Include
- 2X 175A Quick Connect Plugs
- 4X Terminal Pins
- 2X Caps
Accurately polarity markings on the housing help in proper wiring, making it impossible to connect the wrong polarities to one another. Simple and easy for installation.
Made of sturdy housing allows for battery quick connect/disconnect from winches, trailers, or other electrical devices more than 10,000 times.
The grip on both sides of the plugs together to ensure a vibration-proof connection but can be easily disconnected for quick removal for charging of the battery.
The silver-plated copper terminals offer low resistance for superior conductivity, as silver-plated copper contacts inside housings strongly force the contacts together.
Dust Cap Cover Keeps Debris Out of the Plug when Not in Use. Keeps the plug clean and prolongs its life. Ideal for keeping Grime and Excess Moisture from Building Upon the Contacts.
Insert the wires into the terminal pins, and crimp the pin. Then connect wires with plug.
Widely Used
The battery quick connect/disconnect are wide application in Battery Connections, Forklifts, Battery Chargers, Solar Panels, Wind Generators, Tow Trucks, Snow Plows, Farm Equipment, Jumper Booster Cables, Welding Equipment, Towing Winches, and Electric Vehicles. etc
Simple Installation
Harry Piefer
Reviewed in Germany on February 3, 2025
Gute Ware
ampy
Reviewed in Italy on February 19, 2025
ottimo prodotto
Yeliramirez
Reviewed in the United States on January 15, 2025
Excelente producto lo recomiendo muchísimo precio y calidad increíbles
Customer
Reviewed in Canada on January 13, 2025
Nice looking product
Buckie Harrison
Reviewed in the United States on December 21, 2024
They setup easy and are really durable.
Ray Wojtysiak
Reviewed in the United States on December 13, 2024
Value for the money.
Buckloc
Reviewed in the United States on October 9, 2024
Good fit, good quality. Used for quick disconnect for battery boat motor.
Timmess
Reviewed in the Netherlands on October 21, 2024
Prima
Cliff Pankonien
Reviewed in the United States on August 5, 2023
I did a search for "trolling motor quick disconnect" and came up with a bunch a things that would have worked, but weren't quite what I was looking for (these things!). A few days later I was searching for something else and these showed up in the "you might be interested in...:" block down below. I ordered 2 sets, as I was unsure how they would hook up, since I might want to move my trolling motor from front to back, etc. so I wanted to have both bow and stern covered. These things are exactly what I needed. I did not crimp them since I don't have a proper crimper and didn't want to just smash them in a vise. Another guy mentioned soldering the wire in with a propane torch (which I do have) so I went with that. I was done in less than 5 minutes, and some of that time was monkeying with other things. I just heated the connector in a vise, melted solder into the cup until almost full, then heated it again to make sure the solder was molten, and stuck the (10 ga.) wire in, held it steady until the solder solidified. Shove them into the grey connector, done! They click together solidly, and even have covers for when they are not in use. very happy with this purchase.
Customer
Reviewed in the United States on May 11, 2023
I purchased these to use as a device to isolate my winch from my battery when the winch is not in use. The connectors seemed robust and the pins appeared to be sufficient for 50A service. In theory, they'd be perfect for me. However, when the connectors were fully plugged together there was no continuity until you then pulled the connectors apart a bit. I wasn't satisfied with that. My plan B was replacing the connectors with a battery isolation switch on the positive side of the circuit.
STL Zombie Hunter
Reviewed in the United States on December 9, 2023
I wanted to mount a 12V 1/0ga pigtail for my 9000lb trailer winch at the back of my SuperDuty.Some say these are loose and keep coming out of the connector; if you install each cable until you hear a "click", they won't come out. Make sure to melt solder in the connector per instructionsIt is a nice, tight fit even when connected. No sparks, arcing or cables getting hot.
Hannah
Reviewed in the United States on September 13, 2022
same as manufacturer used when new
Dana
Reviewed in the Netherlands on November 20, 2022
ROMMEL!!!!
Recommended Products