Your cart is empty.
Your cart is empty.Product Description
Silver plated Copper terminals
Model: SC 50A
Premium Quality
- The terminal pin is made by copper coated with silver, to ensure a strong electrical conductivity and a stable current and voltage
- Single-piece housing and united construction provides industrial quality and durability
Specification:
Terminal pin dimension: 1/5" Work for 6-10 gauge wire
Wire Size Range: 6AWG–12AWG (0.14–0.22 in.)
Terminal pins Width: 0.22 in.
Package include:
2 x Connect house
4 x Terminal Pin
2 x Hard dirt-proof boot
- Operating Temperature Range:-4°F-221°F / -20°C-105°C
- Voltage: 12-36 volts DC
- UL AMPERAGE: 50A
- Medium Withstanding Voltage: 2200DC
- Vibration Resistance:Excellent
- Impact Resistance: High
- Mating Cycles: 10,000 times
A. Rigs
Reviewed in the United States on February 9, 2025
Good quality and muuuuuuuch cheaper than buying them at a local auto parts store. I use them in sub zero temperatures with no problems. They also come with the nice cover that the auto parts store ones do not have!
NickyNine
Reviewed in the United States on January 19, 2025
I love these Anderson connectors. It makes it super simple to remove my amplifier on top of my custom sub box. I have a beauty panel covering it all and it takes up a lot of the trunk on my 22 540i and the battery is in the rear. So I have to have easy access to the back. The build quality of these connectors are really nice and hold up well. It is super easy and fast to remove my amplifier.
DudeFromFlorida
Reviewed in the United States on January 18, 2025
Absolutely great but these are not meant to connect with the Anderson branded product.
Customer
Reviewed in the United States on December 16, 2024
Makes it easier to get change out batteries on my bulldozer. Set up the charger so all I have to do is plug in works great.
doler otrey
Reviewed in the United States on October 20, 2024
They work perfectly and really good quality for my winch and jumper cables
Slumpy
Reviewed in the United States on October 19, 2024
First box I received was missing 1 of the crimping lugs, but Amazon very quickly sent a new one that had everything included.The connectors just barely fit typical 6awg wire, so if you use heatshrink it is going to be super tight and somewhat difficult to snap the lugs into place. Once you do get them snapped, they are definitely not coming out on accident!The added holes to mount to surfaces is a great touch as well.
technician
Reviewed in the United Kingdom on April 28, 2022
THE ADVERT SAYS A PACK OF 2 , But how on earth can you claim that its a pack of 2 when all you sent was 2 different sides of the same connector?. What is being advertised is actually 1 connector because with out both pieces all you have is 2 wires going into one connector that is not connected to anything.if you need connectors to make 1 connection you cannot claim that this is a pack of 2. My advice is just get the thing off Ebay coz you can get the exact same thing from china at a fraction of the price. Waste of money
Mblass
Reviewed in the United States on September 4, 2020
Overall quality is good and at a very low price. The plastic housing is thick, solid and of good quality. Makes a solid connection with my BYD Lifepo4 batter pack and I really like the caps. Will more like use the caps on the Anderson connector on my battery. The instruction included were very clear on how to orient the lugs as I was a bit unsure. The only issue I had was crimping the lugs. These guys are thick. I believe they are tinned copper as I could see the copper coloration after crimping. If you have access to a hydraulic crimper I would strongly suggest it. I had a hammer type and it took me about 10 wacks with a small sledge hammer to make a solid connection. Even then it was not the best but since my installation is stationary and there will be no vibrations it should hold.
Cindy Aldridge
Reviewed in the United States on May 17, 2019
I used these to make quick connects for a 9500 pound winch on my truck. I have it set up to be removable and wanted to use it on the front or rear hitch mount. This set was fairly easy to install if you have an average shop setup. I crimped 4 gauge wire into them and then soldered the connections to insure durability. You will need a vise to crimp the connectors as they are pretty stiff but were not damaged by heating them to add solder. I did have a little trouble getting the connectors to push far enough into the plastic housing to clip into place, especially after crimping the wire which made them wider. I had to use a little silicon spray to get them to push in far enough to stay in place. The connection between the two units seem to be solid and I did not have any loss of voltage when I put a meter on them. They hold solid but will come apart with a normal amount of effort. I will see how they hold up but my first impression is favorable and winch works using these connections.
rupert
Reviewed in Canada on May 16, 2019
worked perfect for my boat winch to truck connection.
Customer
Reviewed in Canada on December 20, 2019
Excellent quality.
Recommended Products