Your cart is empty.
Your cart is empty.Product Description
Router Bit Set
Suitable for detail profile woodwork
with 1/4" shank which suit for CNC router with 1/4” collet
Compare the UP cut with the DOWN cut
The down cut bit (left) leaves very clean edges while the up cut version (right) is far better at evacuating chips but that action can fray the edges of the cut to some degree.
Up cut bits are very efficient at evacuating chips from the hole or slot it is cutting. This is especially important when the hole is ¼"-deep or more. Deep holes or grooves still have to be cut using multiple light cuts, but the upward direction of the flutes while rotating prevent the debris from building up in the hole and binding or even breaking the bit.
Down cut bits require a slightly slower feed rate. This reduced pace allows the bit a little more time to throw chips out and for them to be re cut into smaller pieces that eventually are thrown from the hole or slot
4 different router bit in this pack
Ball Nose Router Bit
Usef for 3D woodwork, detail profile carving and engrave;
Tip diameter 0.5mm, 4.82 degree single side angle, 1/4" shank
Down Cut Router BIt
Used for clear chips down, good edge quality on top face;
1/4" cutting diameter, 1" cutting length, down cut, 1/4" shank
Up Cut Router Bit
Used for clear chips from the kerf left good quality on bottom face when through cutting;
1/4" cutting diameter, 1" cutting length, up cut, 1/4" shank
90 Degree Chamfer Router Bit
Used for chamfering or beveling any part in a wide variety of materials. impove fluid flow and safety, to part aesthetics;
90 degree, 1/4" shank
Woodworx
Reviewed in the United States on June 8, 2024
These are quality bits. They are very sharp and hold there edge still after many hours of use
💡 The Everyday Find 🔍
Reviewed in the United States on October 24, 2024
I have had no issues. It has worked for my XCarve no problem. If you are starting out and need to get a beginner set this will do just fine. and last a while. I have has them for 3 years
Victor
Reviewed in the United States on July 27, 2023
If you're starting CNC work, these are actually pretty good standard bits for your CNC
Customer
Reviewed in the United States on June 21, 2023
These bits seem good value and quality.
Antonio
Reviewed in Mexico on May 8, 2023
Excelente desempeño al trabajar en el spindle de mi CNC. Juego básico para la CNC de brocas ( fresas).
rbrown
Reviewed in the United States on February 17, 2023
From what I can tell... decent cuts.
Juan
Reviewed in Mexico on October 8, 2023
Me resultaron muy buenas, cortes y grabados muy precisos
Desiree
Reviewed in the United States on November 5, 2022
My dad has a small woodworking business and has been using these for it, he’s had no complaints and seems to be happy with these items.
Pal S
Reviewed in Canada on September 7, 2021
These are a very good set of endmills and perfect for beginners who have just gotten into CNCs. However i would have liked to see a 60 degree v bit rather than the 90 degree because that is more useful for engravings. But the quality of the bits is really nice! They are all very sharp and look like they will last a long time.
RJF
Reviewed in Canada on August 10, 2021
I have only used the upcut end mill so far but was very impressed with the clean cut.
Mike M.
Reviewed in Canada on November 23, 2021
For the price it’s a good set to get you going. Not amazing quality but bang for your buck it can’t be beat
AGB
Reviewed in the United States on April 2, 2021
I damaged a bit and bought this pack in desperation as my replacement would not be here in time and I could always use extras. I had to override the speed to slow the feed down vs the old bit. Seems like a decent bit (1/4 upcut) for the price. Have not used the other bits as of yet.
Garrett Fromme
Reviewed in the United States on November 1, 2020
Considering these are Chinese made, I am very impressed with the durability and cut quality. They are clearly made of carbide. I recommend as a good started set.
Recommended Products
$52.55
$ 25 .99 $25.99