Your cart is empty.
Your cart is empty.Product Description
yudi chadad
Reviewed in the United States on February 14, 2025
This company is excellent and they have very high quality products at excellent prices.
Link
Reviewed in the United States on January 5, 2025
I've been using the SPEED TIGER Micrograin Carbide Square End Mill (1/8", 2 Flute) for cutting (Aluminum 2024-is a high-strength aluminum alloy) on my CNC machine, and I'm thoroughly impressed. These end mills deliver clean, precise cuts with excellent surface finishes.The 2-flute design works perfectly for aluminum, effectively clearing chips without clogging, even during aggressive passes. The micrograin carbide ensures durability and longevity, handling extended use without noticeable wear.For anyone working with aluminum on a CNC, these are a fantastic choice. Highly recommend this 5-piece set for reliability and performance.
Tom Contos
Reviewed in the United States on March 20, 2024
I use this end mill to make hard wood and bone knife handles. Seems to work very well.I would recommend this end mill, it may be worth a try for u ya our application.
J-Son’s Auto and Racing
Reviewed in the United States on July 20, 2020
I used and abused this bit to cut out and mill two AR lowers on my drill press. It started to dull on the end of the Second one. However, I truly abused it cutting the aluminum out and it performed extremely well. Remember that you have to turn the speed up on your drill press for it to function with these bits properly.It still cuts, just a little dulled by the amount of use. Much material is removed to complete the 80% lower receivers.I would recommend it and will certainly buy more for future builds.I had no issues with it breaking, luckily since I only had the one. Also the length is great for the job I did.
mark
Reviewed in the United States on November 26, 2020
I needed to cut some cold-rolled steel on my desktop CNC. Typically steel is not a material you want to cut on a desktop CNC which tend not to be as rigid as necessary. But with some well-thought out feeds and speeds it is possible. I bought the 2 Flute - ISE1/8"2T set of end mills. And I'm very impressed. I ran the machine at 15k rpm, .5mm DOC, and 150mm feed rate. The end mill was outstanding. It didn't chatter, it cut smooth as butter and the finishing pass left a very nice finish on the edge of the cuts. You know what else, the packaging the end mills came in was very nice too. I know that isn't important but most manufactures don't even think about packaging. To give some perspective I use mostly Spektra end mills from Amana Tools, and Whiteside end mills, both for wood. These Speed Tiger end mills were my first introduction to cutting steel.
PAHillWilliam
Reviewed in the United States on November 12, 2020
I had some work to do on some AL (7075-T6) with a Harbor Freight Mini Mill and it worked fine. It had some chatter but some is to be expected with 2-flute cutters anyway. I had to hog out a pocket that was 1.25" deep and down toward the bottom of the pocket the chatter got a little worse but nothing horrible. Again, this is to be expected with this style of cutter. I kept the vacuum going to keep the cutter from cutting through its own chips as much as possible and that helped. The finish was good enough for my needs but I have a 4-flute end mill so I took off another .001" just to smooth the finish even further but again, it wasn't really needed.
WILLY G.
Reviewed in the United States on January 14, 2020
Incredibly impressed with these bits.We were cutting 10 round tabletops in hard maple.I purchased a $35 whiteside upcut bit for the routing, it snapped after 30 minutes of use. I figured if we’re going to be snapping hits then I’d buy a bulk pack of cheap.I installed the first of these bits and it lasted through the other nine tops. The cut quality wasn’t perfect, but tear out was minimal and everything was easily cleaned up in post sanding.Highly recommend them for fast production work of hardwoods!
A. Litman
Reviewed in the United States on December 28, 2019
There bits were ordered to solve a routing cut problem I had. First, some background - I have 2 CNC Routers. One is home built from a kit and the other is from a US based manufacturer. I use Vectric's CUT2D software to generate G-Code. One of my projects had relatively small letters using a "stencil" font so there were no un-supported letter parts. I tried using a V-Bit but as it went deeper, the letter sides would become too thin and fall apart. The smallest end mill I had before buying these was 1/8" inch. My letters were so small on a 2" x 4" field that a 1/8" mill could not cut all the slender parts and I was left with gaps in the letters.I ordered these 1/16" bits in an attempt to pocket cut the letters and retain the delicate lines. They worked spectacularly! I first used my smaller CNC to test cut a block of pine wood. The bits made clean, sharp cuts with almost no after routing work needed in the corners or the top edges. For the main cut, I used my larger machine and cut the letters in 1/8" thick polystyrene plastic. The end result was perfect. Clean cuts all the way through and no melted edges. The 2 flute design allows chips to fly away via the vacuum device is use to keep the material clean. The bits cut cleanly and without any heating to melt the plastic base.So far, I have cut polystyrene, MDF, and pine wood with no clogging or poor edges. I will look to this supplier for additional bits in the future.
Recommended Products
$17.49
$ 7 .99 $7.99