The media could not be loaded.

After owning several (4) Sovol 3D printers and recently adding the Klipper screen to my SV06 Plus, I knew that the added features of the SV07 Plus made the printer a worthwhile purchase for me.When the printer first arrived I was very excited to get it put together. It was very well packaged as all of my Sovol printers have been in the past have been and there were no sign of any damage to the printer or any of the components. 2 of the 3 bed adjustment wheels did appear to have loosened during shipping and the wheels and springs had to be threaded back onto the bed adjustment screws which was no big deal. Other than that, assembly was a breeze and I had the printer put together in less than 30 minutes.The printer includes both bed adjustment wheels/springs as well as the static mounts if you prefer to rely on the printer to maintain your bed level (similar to SV06/SV06 Plus). With this printer I opted to use the bed adjustment wheels and haven’t had any issues with prints not sticking to the bed. Just make sure you calibrate it correctly and well the first time and you shouldn’t have any problems. It’s also a good idea to print a first layer test to ensure that your z offset is correct as this is a huge factor with prints and how well they’ll stick to the bed. Unlike many of the previous printers that I’ve owned, the L and R Z motors in the SV07 plus are able to make independent adjustments and the Z-Tilt bed leveling has been spot on for me and I’ve had nothing but beautiful, perfect 1st layers on all of my prints.I’ll also say that Klipper has been a game changer for me and is a perfect match for the SV07 Plus; this is by far the best printer that I have (or have ever had) in my collection. With the exception of the large part cooling fan this is the quietest printer that I’ve used. It may be due to the use of V roller wheels in the SV07 over linear rails but it is certainly a welcomed change in my opinion. I mentioned that Klipper has been a game changer for me and I mean that. Having the ability to send prints directly from my PC to the printer over Wifi and not having to move an SD or USB back and forth between pc and printer has been such a convenience and should be standard on all printers moving forward. I’ve also recently switched from using Cura to Orca slicer and added settings in Klipper to probe the print area and run z tilt calibration before every print but I’d suggest first sticking to the basics until you settle into and get to know the printer first. There’s a lot you can do with klipper but you don’t want to over complicate things right off the bat.All in all I would agree with the other great reviews of this printer. I already have several printers in my collection and didn’t think that I’d own another “bed slinger” but after adding the klipper screen to my SV06 plus, my love for 3D printing has been re-energized and the SV07 plus is now my all-time favorite which will be my baseline for any future printer comparisons. It’s been a fantastic printer and one that I can trust to print just about any job that I can throw at it not have to worry about the job failing. It is a printer that I will continue to recommend to all of my 3d printing friends and the price and features included make it a worthwhile competitor to many of the more expensive printers available today.Pro’sKlipper w/touch screenIncludes double sided PEI sheet and additional adhesive bed sticker.Hard bed mount points for bed OR bed leveling wheelsIncludes Accelerometer for input shapingTool Tray for storage with included tools (I love this)Built in LED lights on the print head which can be turned on/off from klipper screenVery quiet and very fast printing!ConsPrint head ribbon cable is flexible and can potentially get caught on the gantry fan. I printed a simple cable “spine” that holds the ribbon cable out of the way.

... then the Air Duct in the printhead broke.Despite what I've heard, it appears that SOVOL support is no good at all. Perhaps I haven't given them enough time, but I sent an email to the address on the card that came in the box and have heard precisely nothing, not even an automated reply.

The media could not be loaded.

Although this printer has numerous levelling options, the instructions were lacking. It's good they had the levelling video on their site, as it was not easy to find. I have the Sovol SV06 and SV06 Plus, and those had sufficient documentations that came with the printer, but this SV07 Plus has less and it wasn't as intuitive as the other Sovols. But once it is setup properly, printing was a intuitive and flawless. The prints were not as good as my SV06 as I think it's due to the default fast prints. Slowing the print a bit allowed the filament to cool better and become more solid. I think it's also based on the filament brand as some brands less smush (sticky)... I updated the review to 5 stars as once I got the config right, it was better than my SV06 plus. If you need help with config, just google the model and you will see lots of tutorials

Buena impresora para quien quiera imprimir cosas pequeñas(como en todas las reviews en video). Nunca logre imprimir algo de mas de 20 cm sin que se pandeara horrible como se ve en mis fotos. La cama nunca se pudo nivelar bein como ven tambien y tienen que considerar el espacio hacia atras para la cama, no puede imprimir tan rapido como anuncian y las ruedas sueltan demasiado polvo aunque las ajustes bien. No la recomiendo.

Goes off calibration easily in my case.I do not recommend for beginners.