Your cart is empty.
Your cart is empty.Product Description
Temperature-controlled Soldering Iron, is widely used for home DIY, soldering projects, welding circuit board, electric repairing, crafts/jewelry making.
- ON/OFF Switch - you can turn the soldering iron on or off, more safer and convenient.
- Temperature Knob - to set the optimal temperature based on the solder alloy composition that you use.
- Four Ventilation Holes - for quick heat dissipation.
- Heat Resistant Grip - for safety when holding the soldering iron.
- Upgrade Wire Cutter - you can cut and strip different size cable easily.
- Question: From which degrees should I start to heat up the soldering iron?
- Answer: We recommend that you start heating from the lowest temperature 200℃ / 392℉ and then heat up gradually when necessary. Do not heat up on highest temperature at the beginning as it may cause the tip to burn out.
Internal Heating Ceramic Sensing Technology
Heat up and reach to desired temperature quickly.
ON/OFF Switch
Saving energy and ensuring safe welding.
50 Grams Solder
Good wettability, conductivity, thermal fatigue resistance.
- Question: How do I choose the right tip for different operations?
- Answer: B-tip (round heads) for general welding. I-tip (pointed head) for fine soldering or for modifying solder bridge when soldering chips. D-tip (flat head) and C-tip (cutter head) for large area welding. K-tip (knife head) for SOJ/PLCC/SOP/QFD electronic components and for solder bridge.
Daniel Viens
Reviewed in Canada on March 6, 2025
recu avant le temps
yamaris
Reviewed in the United States on February 25, 2025
Very nice
Guramrit
Reviewed in Canada on June 15, 2024
I recently purchased the Soldering Iron Kit with 60W Adjustable Temperature and was thoroughly impressed with its performance and versatility. Whether you're a hobbyist, DIY enthusiast, or professional, this soldering iron tool proves to be a valuable addition to any workshop or toolbox.The adjustable temperature feature allows precise control, accommodating various soldering tasks with ease. From delicate electronics to larger projects, I found the ability to fine-tune the temperature crucial for achieving clean and durable solder joints.The inclusion of 5pcs soldering iron tips further enhances its versatility, catering to different soldering needs and ensuring flexibility in handling various materials and components. Each tip is well-made and easy to replace, providing a seamless transition between different soldering tasks.The ON-Off switch is a practical addition, allowing for quick and safe operation without the need to unplug the iron between uses. This feature not only enhances convenience but also contributes to the overall safety of the tool.I particularly appreciate the ergonomic design and comfortable grip of the soldering iron, which minimizes hand fatigue during extended use. The kit also includes essential accessories like solder wire and a stand, making it a comprehensive solution for anyone starting or expanding their soldering projects.Overall, the Soldering Iron Kit with 60W Adjustable Temperature is a reliable and efficient tool that delivers excellent performance. Whether you're soldering circuits, repairing electronics, or tackling creative projects, this kit offers everything you need in one package. I highly recommend it for its quality construction, ease of use, and impressive results.
Paul kilroy
Reviewed in the United States on May 3, 2024
Saw this price and I thought, there is gonna be a situation that I'll find myself trying to connect a couple wires and wish I had this.I bought it, it works and it has solved the times I needed to connect a couple wires. I keep it in my car and enjoy telling people that I could just solder that real quick for you. When someone says, no you can't, you whip this guy out and prove them wrong. That's worth this price all day.
Pikachu
Reviewed in Canada on February 22, 2024
No big issues it takes a minute to heat to the right temperature but works perfectly no issues with the buttons or the screen the only thing that bothers me is the silicone grip it keeps moving but everything else works perfectly . Great starter kit it comes with a little bag.
Alexis
Reviewed in the United States on December 24, 2024
El artículo cumple con lo descrito!!
Jerry
Reviewed in the United States on August 13, 2023
I gave this item 3 stars for two reasons: First, this soldering kit includes a spiral soldering gun stand which includes a support rod to keep the stand from sagging. The support rod in my kit is the wrong part because the bends in the rod are in the wrong place to be able to support the spiral. The soldering gun is "OK" and I will keep it, but I would like to have the correct support rod. Secondly, The information in the ad for this item said it would be delivered the next day, but was actually delivered on the THIRD day. Don't make promises you can't or don't intend to keep. Also, if you are going to supply lead free solder you should include a small container of flux. My project was delayed for an additional day because without flux, lead free solder requires far too much heat to make a satisfactory solder.
wess beck
Reviewed in the United States on May 3, 2023
This works better than I thought it was going to I'm impressed with it and I like all the accessories that it comes with It's handy and the cases awesome however it sucks if you have to change tips because you got to wait for it to cool down and it takes a while to cool downgreat tool definitely recommend it
Paul Lakin
Reviewed in the United States on March 7, 2023
I took it from the packaging, a little excited, I had a project that was waiting for a working Iron and I wanted to get started. Still do. I thumbed the oddly placed on button and it popped out. When I looked done to see what fell I caught the trim, as it fell from its seat around the now missing On button. I could not locate the fallen button but needed to continue. I managed to press the actual momentary button, on the pcb, inside the plastic wand, a wand. It came on and quickly rose to a temperature (far under what the screen was claiming, but a usable temp, none the less. In the next 10 min or so, the up temp - button and the temp - down button, both fell out, not leaving, a single trace of what might have been used to attach them, in the first place. So, I'm of the belief that there was nothing planed, in case the soldering iron was ever used where gravity might be in effect.I tried to rig buttons to fit the square and octagonal holes above the pcb button actuators. While fitting something over the hole the wire feeding AC power to the board came loose because the crazy thick, crazy stiff, cord pulled loose from its solder points. I tried to get it working and succeeded only to have the next weak point break until it is now a lump of junk on my desk. Much like it was while waiting to be sent, as a joke on me for thinking I bought a working tool.
Ed Huisman
Reviewed in Canada on December 24, 2023
Just another of the many cheap soldering irons made in china. Not meant to be used for repeated high heating soldering jobs but for low melt point solder, more than adequate. Watch out when you first use this gun, the temperature is set at max, this will radically shorten the life of your tips and the tip holder. The solder that comes with this kit is low temp solder and won't need much heat over 250 so turn the iron down before using.
Ned Brogan
Reviewed in the United States on July 27, 2022
I like it. I use mine for soldering with guitar projects. Just got it a couple weeks ago, but have already done 3 projects with it. Works very well. Precise. Could stand to get a little hotter, like my old / clumsy soldering iron. And feels just a little on the cheap side. But it's very good. I think I may try one of the thicker tips too. Might help disburse a little more heat. The solder is crap that comes with this. No big deal at all. I have good solder. But the rest of the kit is good. LOVE the stand that it comes with. Helps me a lot. Also love the on/off button on the cord. Those are the 2 main reasons I got this. Not sure about the temp control button. I crank it up all the way and leave it there. But yeah. Very good little kit.
Don Kelley
Reviewed in Canada on June 27, 2021
Fantastic collection of parts. No instructions for how to assemble the stand, but once you look at the photos in the amazon listing it's clear that you put one nut most of the way onto the iron stand and onto the solder stand, and then put each through their holes in the black metal base (solder stand faces 90% do the left sticking past the left edge of the item), then, with pliers or a little wrench, tighten the second nut onto the bottom of the black base onto each stand until tight.Soldering iron has been upgraded since the old version of this iron I bought a year ago... this one has an on off switch in the cord, which is brilliant, and the tips are lasting much longer than on the old version of this iron so far (like, I haven't had to change the tip yet after 15 or so soldering points done... the old one might not have lasted half that long, believe it or not). And it comes with lots more tips.desoldering gun is excellent, although they are always hard to use and desoldering wick is a good thing to have also.sharp little wire cutters are excellent, and also are useful for stripping. two little tweezer pairs are really well machined and very tiny and strong on the tips. I'm sure there's more - oh it comes wiht a surprisingly thorough instruction list for how to solder, which is great to see.arrived fast, on time, cheap, great, case is great too although you cna't put the stand back in once assembled.
influence peddler
Reviewed in the United States on October 28, 2020
The media could not be loaded.
Recommended Products