Your cart is empty.
Your cart is empty.Product Description
Gooswexmzl Sun Shade Sail Hardware Kit with Cable, Stainless Steel Installation Kit for Rectangle Square Triangle Shade Sails.
- Great for most Square/Rectangle/Triangle Sun Shade Sails.
- Square shade sail below 15 ㎡/161 sq.ft, such as 7’ x 13’, 8’ x 10’, 8’ x 12’, 10’ x 13’, 10’ x 10’, 12’ x 12’
- Triangular shade sail below 15 ㎡/161 sq.ft, such as 4’ x 4’ x 4’, 10’ x 10’ x 10’, 12’ x 12’ x 12’, 12’ x 12’ x 17’, 16’ x 16’ x 16’
- Note: Screws come with pointed tips, please keep them away from children under 3 years old.
Gooswexmzl Sun Shade Sail Hardware Kit
- Our shade sail installation kit is made of high quality 304 stainless steel, anti-rust, anti-corrosion, strong and secure. It's safe to use them to mount shade on the porch or for outdoor use.
- Designed specifically for outdoor use. They are perfect for mounting a standard sun sail if you want to have shade on your porch, which also can be used in outdoor, patio, garden, cafe, deck to protect against the sun's harmful rays.
- Package includes:
- 2 x Rope
- 4 x Turnbuckles
- 4 x Pad eyes
- 4 x Snap hooks
- 16 x Screws
- 16 x Plastic expansions
Turnbuckle
It is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems.
Padeye
Provides an attachment point, made all in one piece.
Snap Hook
A metal loop with a spring-loaded gate, used to quickly and reversibly connect components.
Screws
Sail hardware kit's screw are sharp and plastic expansion help it to be sturdy when attached to the wall or trees.(In order to avoid Screws being damaged during use, we have specially provided you with a backup)
Customer
Reviewed in the United States on February 16, 2025
Product is as described. Would order again
Buz Loewenguth
Reviewed in the United States on August 23, 2024
Good value for S.S. hardware.
RJ Leyva
Reviewed in the United States on June 2, 2024
We received precisely what we expected and are very pleased with this purchase. The items have met any and all expectations.
YoL
Reviewed in the United States on November 16, 2024
A sturdy product for severe weather! Protects my plants from the harsh sun from being fried! The canopies last 3 years before i have to replace.
California Resident
Reviewed in the United States on March 4, 2023
I use this hardware to mount a shade on my upper veranda. When the wind gets strong, I can easily unhook the shade from the outer mounts and it keeps the shade from buffeting. Hanging it back is quick and easy.
Ryan G.
Reviewed in the United States on November 8, 2023
Product works perfect and as described. I used these to hang a sunshade off my side deck and was super easy and had everything i needed.
Bruce Hedlund
Reviewed in the United States on April 9, 2023
After buying these, and realizing the turnbuckles kept coming loose, I decided to go to the hardware store and buy my own. I would not buy these again because the way the pieces screwed together on the turnbuckles is in my opinion out of tolerance. They are not as tight as they should be, and wiggling back-and-forth when the wind is blowing, you will notice they basically become loose. Obviously they can’t unscrew so there’s too much play and eventually they just slip apart.
Shawn Waldrop
Reviewed in the United States on August 30, 2022
This kit comes with everything you need to successfully hang a shade sail with no help. All you need is a ladder, drill, tape measure and level. Since I was going into solid wood, I eschewed the plastic anchors and provided screws - instead opting to use 3 1/2” deck screws. The anchors were able to hold me up, so I know they were secure enough.To the included cotton rope. If you’ve never done this before, I promise, you will never accomplish this alone by simply tying a knot, running it through the bracket and pulling. You’ll need to master the pulley method.Use the rope to tie a knot on the D ring of your shade sail. Then run the other end through the bracket you installed. THEN loop it back through the D ring again. Now, when you pull the rope, it will tighten so easily, you can almost do it with one hand.Make sure the turnbuckle is loosened out almost as wide as it can go. Now, you should have no problem hooking both sides of the turnbuckle between each ring and bracket. Do all 4 before going to the next step.THIS is VERY important. Get a large adjustable wrench that will fit the width of the turnbuckle and tighten down just enough so it won’t slip. Gradually turn the wrench towards you until either you can’t anymore, or the hook bolts are touching.If you use a wrench that’s jaws won’t cover the width, the turnbuckles will bend quite easily, rendering them useless. You have just enough hardware to do 4 corners. Just go easy, and slowly. You should be able to get it tight as a drum if you measured correctly.Time will tell as far as their durability goes. But you get the entire kit for what a single turnbuckle costs at the hardware store.Would buy again in a heartbeat. But would go a lot slower when tightening them up.
Recommended Products