Your cart is empty.
Your cart is empty.Product Description
The package includes：
1 x 2.0 ton heavy duty lifting jack
1 x Crank handle
YICSUJU Scissor Jack Kit
Simple and portable, a must-have tool for changing tires！
- This clipper car jack kit has a 4,409 lb. capacity to help keep your trailer level and stable. It adjusts from 4" to 24" inches depending on your situation, and the bowtie base stabilizes the jack on a soft surface. Perfect as a tool for roadside tire changes and maintenance.
- The sturdy base increases the contact area and is not easily deformed. Fixed base effectively prevents falling off.
- This lightweight car jack is very convenient and easy to store in your trunk.
Wide range of application
Our scissor jack is suitable for off-road vehicles, pickup trucks, suv's, vans, cars, etc. that weigh less than 2 tons. Very suitable for mechanical repair, especially automotive repair. When the car breaks down in the middle or the tire leaks when driving, the jack can help you deal with it properly in time.
Crank handle
The 1-piece handle provides fast response and speed in the field, and you can use it to adjust vehicle height easily and quickly.
Robust, high quality steel shafts
Solid steel shaft, threaded shaft, solid
positioning shaft fixed shaft, not easy to move deformation, strong and durable.
How to use?
- Place under a chassis suitable for lifting.
- Turn the handle clockwise to raise the jack to the proper height.
- Confirm that the jack is in contact with the chassis, continue to move the handle and the car jacked up.
- Lift the vehicle off the tire and begin changing the tire.
- When the repair work is complete, crank the handle counterclockwise to land the vehicle smoothly.
- Crank the jack to its lowest position, remove and store.
Caution.
(Due to manual measurement, please allow 1-2% error.)
1, check to confirm the load-bearing capacity of the jack and the height of the working stroke, use must not exceed its rated load.
2, before lifting, park the vehicle on a horizontal hard road (maximum slope of not more than 6 °), the vehicle parking.
3、After confirming that the wheels on the diagonal of the removed tires are effectively stuck, loosen the nuts of the wheels to be replaced, but do not unscrew the nuts at this time.
4、Place the jack under the jacking position specified by the car factory, and use the handle to crank the jack to the appropriate height.
5, crank the handle to raise the vehicle to the appropriate height, unscrew the wheel nuts and replace the tire.
6 、After replacing the tire, hand tighten all the fixing nuts of the tire. Do not forcibly lock the fixed nuts of the
Mateo A.
Reviewed in the United States on January 13, 2025
This scissor jack was tough to find, but it's worth it! Its unique dents and floor supports provide excellent grip, ensuring your car stays stable without shaking. After a year of use, it remains solid and operates smoothly—highly recommended!
Thomas Schilleci
Reviewed in the United States on September 3, 2024
I use a6x6 block of wood under the jack for more lift
Angelica Yepes
Reviewed in the United States on September 25, 2024
Worked great on my 2012 Toyota Highlander
bob
Reviewed in the United States on February 29, 2024
It is what it is: cheaply made but also cheap for the price. I would NEVER use this thing to lift anything over 1000lbs because if you do, you are taking a serious chance. I only bought this to mount on my wood splitter(600lbs) so i can pull the wheels off out in the woods. Even then i dont think the threads will last that long. The one i received did not include the handle, which i do not need, so i'm not sure if these even are suppose to come with a handle or not.
Jeffrey M Turk
Reviewed in the United States on November 28, 2024
Works fine already used it
Randy Friesen
Reviewed in Canada on October 14, 2024
Works as should but box it came looked like it had been in a wreck.Lucky it was metal so no damage so therefore gave only 4 stars.
Customer
Reviewed in Canada on April 22, 2024
J'ai utilisé ce produit pour lever une voiture sous-compacte (bien en dessous des 2 tonnes permises) et le jack s'est brisé directement. Je ne recommande pas cet article.
shawn
Reviewed in Canada on April 12, 2024
It's almost identical to the OEM jack for a 2014 Subaru Impreza. The only problem is that this jack is about 1cm wider than the Subaru OEM jack, so it doesn't fit in that foam thing within the spare wheel. I'm a little disappointed, but I'm reasonably happy with this purchase. The jack works great, and I'll just keep it in a bag with the rest of my emergency stuff (air compressor, tow rope, jumper cables, etc).For context, the OEM jack for a Subaru Impreza costs $260. wtf? Just buy this thing for $50. Even the Subaru parts guy said Subaru jacks were a rip off and I should look at an auto wrecker if I really want an OEM jack.
Brian Van Camp
Reviewed in the United States on September 2, 2023
Replaced the jack in my Honda Fit with this item because it has a ratcheting wrench which makes it WAY quicker and easier to use when you get a flat. And I have had a few lately.
AB
Reviewed in the United States on September 17, 2023
This is probably one of the dumbest designs I have seen in 25 years machining and engineering experience with MachiningPartner.The handle comes in two pieces likely to save on shipping and size so it can be packaged more compact. However, the connection between the handles is thinned out and bent right away and the teeth started slipping as the engagement isn't adequate. And no I wasn't trying to lift a semitruck but Buick sedan. Returning it.Regardless which jack you use always be very careful and properly position the jack and always use stands as precaution. Both hydraulic and manual jacks can fail.
JB
Reviewed in Canada on October 16, 2023
Works great and fast to raise and lower with handle
Cindy & Mark Hall
Reviewed in Canada on January 10, 2023
Fits perfect in 2011 Venza jack storage . Excellent replacement jack.
Athlete
Reviewed in the United States on April 20, 2023
The screw sticks and clunks on every turn. The endpiece where you attach the handle is visibly bent. So much for quality control. It's junk. ON A POSITIVE NOTE: Amazon had me take it to a local Whole Foods and they now have it and are shipping it back for a refund. Fast and easy. Manufacturer is now shipping out a new one. I will add to this as things progress. . . . A few days later a new jack came. Luckily it was undamaged. I was impressed that the screw came heavily greased. Not the case with a lot of jacks. While this all took place I really needed a good scissor jack now, so I went to to Harbor Freight which has a terrible reputation for bad quality goods. HOWEVER, their scissor jack is the best I have seen in 4 weeks of looking. MUCH more hefty than this one. I bought it. Now I have two!
Recommended Products