Shopping Cart

Your cart is empty.

Your cart is empty.

SATA to USB Adapter with Power, USB 3.0 to SATA External Hard Drive Cable for 2.5' 3.5 inch SSD/HDD Up to 20TB Converter with 12V 24W DC Adapter Supply Support UASP Seagate WD Hitachi Toshiba

4.8 (9) Write Review
Free shipping on orders over $29.99

$15.99

$ 6 .99 $6.99

In Stock

1.ItemPackageQuantity:1


2.Size:Sata To Usb 3.0 With Power


About this item

  • Quick Access to SSD HDD SATA: CLAVOOP sata to usb adapter connects to your computer via 2.5" SSD/HDD and 3.5" HDD, helping you expand storage, upgrade systems, back up files, retrieve and recover data
  • 5Gbps High-speed Transfer: This ssd to usb adapter support UASP technology, using USBC 3.0 high-speed interface, theoretical speed up to 5 Gbps, get up 390 MB/S read speed based on tests, the actual rate will depend on the capability of your device
  • Safe & Durable: This hard drive to usb adapter adopts high-performance chip and high-hardness ABS material; 2.5" SDD plug and play, 3.5" HDD come with DC12V 24W power; 10 minutes smart sleep; LED power indicator; The adapter length is 18 inches
  • 20TB Large Capacity: This usb 3.0 to sata adapter with power supports 2.5" SSD/HDD and 3.5" HDD up to 20 TB; Compatible with Windows 8/9/10, Mac OS, Linux and other systems (Note: Mac OS systems usually support HFS+ or APFS format hard drives, additional software support is required to read and write on a Mac, please be careful to check your device and hard drive format）
  • Wide Compatibility: For Samsung 860 EVO / 850 EVO SATA III, Silicon Power, Toshiba P300 3.5", WD Green SATA 3, WD Blue PC Hard Drive, Seagate Barracuda 3.5/2.5, Seagate FireCuda, Crucial BX500, PNY CS900, YUCUN internal Solid State Drives and more
  • Note: usb sata adapter upport SATA(serial port) interface, do not support IDE(parallel port) interface; Please confirm that your hard drive is SATA interface before purchasing; During use, please connect the power supply, and the reader can light up, which means that the adapter can work normally
  • Quality Inspection from CLAVOOP: Our sata to usb adapter with power have passed strict quality inspection before leaving the factory; If you have questions about it, please contact us in time; CLAVOOP Service team will provide you with answers


Product Description

SATA to USB Adapter with Power

  • Please check whether the hard disk has partitions. The new hard disk can be used only after partitioning.

  • The partitioning steps are as follows: Right click on the "computer" "management" - "disk management" - find a new hard drive - right click on the "initialization" "new simple volume" - the default do next - Accomplish.

  • 5G is the standard definition of the USB protocol and is a theoretical value.The specific transfer speed in use depends on the hard disk and the computer. In the actual test, the speed of different hard disks and different computers are not the same.

  • 1.When using a desktop computer, use the USB 3.0 port at the rear of the host. Otherwise, the power supply may be insufficient.

    2.It is recommended to replace the USB port for comparison test when using the laptop to avoid hot swap.

  • 4.If the hard disk is used for a long time, it is very likely that the hard disk has bad sectors. If there are many bad sectors, the hard disk will be disconnect.


Capt. S
Reviewed in the United States on March 8, 2025
Makes backing up content so much better.
P Soniat DuFossat
Reviewed in the United States on March 5, 2025
Plugged in and drive worked immediately. Note drive must be properly formatted for the system accessing it to see files. If it isn't properly partitioned and formatted you can use utilities to reset, partition, and format the drive to make it useable.You could use this to create an external drive but an enclosure would probably be a better idea for long term use. This is probably best to pull old data off and clearing the drive before disposing or selling it.
Accurate Description
Reviewed in India on February 9, 2025
Though device should have been useful,Seller has sent 5v -2 ampere power adaptor(Incompatible) instead of 12 v -2 ampere power adaptor as mentioned in the discription.
Cyclops
Reviewed in the United States on February 28, 2025
Works as intended, good transfer rates, no complaints.
SBlaster
Reviewed in the United States on February 27, 2025
Needed a way to attach a spare external 2.5" SSD to my laptop and to also allow quick attachment to a 2nd PC with the same SSD.
Kindle Customer
Reviewed in the United States on February 19, 2025
works well...... however if you want to copy files from that drive if they are password protected in windows you cant you will need to use the usb on the other machine itself......... ad on usb ports don't work for thatagain the adapter works great for what it was designedcheap price too lol
KenM
Reviewed in the United States on January 5, 2025
I tried using this on an old internal drives I had, never was able to get it to function. I bought this adapter to try to read a hard drive from dvd/hd recorder to learn the file format of the hard drive. I wanted to install another drive, as the old one stop working. But the adapter would never read that drive. So I am stuck with something that doesn't work and was a waste of money.
Customer
Reviewed in the United States on January 23, 2025
hooked it up to 3 old sata drives , instant access, formatted, and did everything i needed for an external
Kyle
Reviewed in the United States on January 18, 2025
Super happy with my choice here. These were the cheapest option, and ended up being the best deal. They're JMicron controllers. Not the best, but a good mid tier option. Also means you can run smartctl on the drives. 100% necessary for long term storage. That was my biggest worry as I'm using these for a Pi NAS. If you have a 3D printer and some technical knowledge, these are a great buy. The HDD rack model in my image is on Thingiverse with thing:3664611If you're wondering about the configuration, you have to disable the UAS quirk for these to work with smartctl.On most machines you can disable it in the grub config with GRUB_CMDLINE_LINUX="usb-storage.quirks=152d:0583:u". On a pi you have to edit /boot/firmware/cmdline.txt and add usb-storage.quirks=152d:0583:u to the end. Use the -d sat flag on smartctl! Ex. sudo smartctl -t short -d sat /dev/sda OR sudo smartctl -a -d sat /dev/sda.Again, super stoked on these little adapters!