Your cart is empty.
Your cart is empty.
Description:
100% Brand new and high quality.
2 Pickup Harness - 500K with Toggle
Prewired harness features two 500K big size pots with 18mm shafts for mounting through the body.
Works great for guitars like Jackson and ESP.
3-Way Toggle Switch includes mounting nut/washer and switch tip.
Tone pot is wired with a .047 cap.
Input jack.
All you need to do is solder your pickups to the switch, run the included bridge ground wire to your trem/bridge, and you are set.
Package include:
1 set wiring harness
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Rogue
Reviewed in the United States on January 25, 2025
Total replacement on this old thing was a flawless change over solder 3 wires an done
Greg Rankin
Reviewed in the United States on January 22, 2025
No serious problems. The rhythm / treble switch is clunky as hell, feels like I'm breaking it. The solders are flimsy and the wire gage is microscopic. If you're delicate this will work fine.
Frank Carl
Reviewed in the United States on December 31, 2024
Small pots. bad solder connections, not worth buying, one pot had a short
Gma
Reviewed in the United States on December 23, 2024
First of all the V/T/3-way switch works just fine and I feel the quality is good. However, I had to order a second assembly becausd I ruined the first one from poor soldering skill. I was using a 75W soldering gun that was too hot. Solder got inside the volume pot and wrecked it. This was my fault, but the reason for all the soldering was because the wires broke off the pots and switch connections extremely easily. So with the second assembly, I too much gtreater care in handling, plus I switched to a pencil style 40W soldering iron. Even with very careful handling, one wire broke loose from one of the switch connections.
Luis Ubiles
Reviewed in the United States on December 21, 2024
Works and fit perfect for my BC Rich Mockingberg.
Tom T
Reviewed in the United States on December 12, 2024
Just soldered output wires from the pickup, worked the first install.
Eddie Davis
Reviewed in the United States on November 6, 2024
I took my time and did it right. Watched some you tube vids and this sounds amazing! I put these on a B.C. Rich Warlock that was completely unplayable for one of my students. My first time ever installing pups and I couldn’t be happier. Great sound! My student is going to be thrilled. Just take your time, watch some you tube vids and this is a really good system for a terrific price.
Scuba steve
Reviewed in the United States on November 1, 2024
Installed on epiphone les paul special ii.It works great, the length of the cables were great, it made installation effortless. I'd buy it again.Worth noting--the volume for cuts out early when rolling it down.-the tones control is great!-3 way switch very solid, on the stiffer side, needs to be broken in.-on my epiphone I did have to make the holes slightly bigger in the body for the pots to slot through.-the knobs you'll want are the professional bigger scale. I modified mine to rig them on it.
Recommended Products
