Your cart is empty.
Your cart is empty.Haydon
Reviewed in the United States on February 6, 2025
Works good haven't had any issues with it!
Lucianone59
Reviewed in Italy on August 4, 2024
Ottimo prodotto come dicono le istruzioni lui fa
Catie
Reviewed in the United States on August 29, 2024
Bought this to monitor the hours on a 19hp Kohler engine mounted on some outdoor rental equipment. I mounted the tach in a location where it would be mostly shielded from the elements, and anticipated at least some degree of moisture resistance as long as it wasnt in the direct rain, but in about 7 months it was fully dead. I used this for tracking the hours on rental equipment so I can properly keep up with maintenance schedules but, about 7 months after installing it, my machine was returned from a month-long rental and I have no idea if it was used for 50 hours or 200 hours. Not a good product for outdoor equipment.On the plus side, it was easy to install and set up, and I was able to set it to a guesstimate of the equipments current hours to simplify maintenance schedules, and I like the mounting options it came with. Was really hoping it would last longer.
Placeholder
Reviewed in the United States on June 18, 2024
Works very well. I'm using it on a 2 cylinder 4 stroke engine and the RPM measurements are spot on if configured properly.
Motophyllic
Reviewed in the United States on May 28, 2024
I loved the product while it was working, but first time I got it wet the display fogged up and it stopped working
michael w.
Reviewed in the United States on November 6, 2024
easy install, 5 wraps around spark plug wire and its right on accurate..i have 2 locations with velcro to use it.. wanted it on the lift handle out of the sun for visability but its too thick and gets hit by tiller handle..so i mount it on engine cover when in use, hard to see the hours as its small and near top of gauge, .
Kunde
Reviewed in Germany on August 9, 2023
Das Instrument ist das wofür es steht, nämlich vor allem ein kostengünstiges Hilfsmittel zur digitalen Drehzahlüberwachung eines Verbrennungsmotors mit Zündkerze (2 Takt oder 4 Takt) . Genauigkeitsbereich in der DZM Anzeige auf 10 rpm, tatsächlich wird die Ungenauigkeit -wenn Anzeige einmal stabilisiert -von mir auf +/- 30 rpm geschätzt (Vergleich mit analog). Ganz einfach fest um das Kerzenkabel gewickelt und fixiert, dient es auch als Synchronisationsdrehzahlmesser im Leerlaufbereich des Vergasers eines ein- oder zweizylindrigen Motorrads - und das für sehr wenig Geld. Da braucht es kein Instrument für 300 - 400 € !!!!!!!
Godard
Reviewed in France on August 27, 2023
Affichage des tours minutesBeaucoup de fonctionsParamétrage des entretiensConsomme pas beaucoup de piles
Christopher Nasseri & Co.
Reviewed in the United States on May 10, 2023
I bought this for my 2020 KTM 690 SMC-R because it doesn't come with a tach. I wear noise isolating earbuds while I ride, and the bike is so smooth that I can't tell what RPM I'm at based on vibrations (that's how I could tell for my other bikes). First I tried a similar tach that looks the same but has less features and was buggy and slow. This one is far superior. One thing I wish it would do is turn off the display when it doesn't detect an RPM signal. That way I could leave the backlight on and it would only consume battery when the bike is running.This meter has a lot of features and specifically has the clock and RPM calibration range which the other similar looking meters don't have. The refresh interval of 0.5 seconds is fast enough for cruising which is when I need this most.My bike has coil packs instead of spark plug wires (most bikes these days have coil packs) so I pulled down the upper dust seal and stripped the black insulation off the induction leads, the tightly and nearly wrapped them 4-5 times around the metal coil body before sliding the dust seal back up over them. Works perfect and you would never know it's there.
Oscar
Reviewed in the Netherlands on May 8, 2022
Mounted on my 6HP 4 stroke boat engine, works perfectly fine, but the battery is drained fast.A new duracell CR2032 battery went from full to 30% after 4 hours of usage. No backlight, only RPM display and the update interval is 1s not 0.5s.
Neil T.
Reviewed in Canada on May 19, 2021
Had two day shipping and it took exactly 9 days for me to get this item not impressed this item could be superb but took me nine days when I paid for two day shipping
East of Sun/West of Moon
Reviewed in the United States on June 20, 2020
This is the third hour meter I installed on my Yamaha generator. It ought to be original equipment, but I digress. The first one I bought was cheap but it lasted much longer than the official Yamaha meter, which cost much more. The Yamaha meter failed after 200 hours, blank display, then a constant 0.3.It made a lovely noise as I discarded it into the trash can. This one appears well built, you can set the initial hours - great for a replacement, unlike the Yamaha - the battery is replaceable, and there are all sorts of programmable functions.I just installed it so I can’t attest to reliability. But it’s much nicer and less expensive than the Yamaha meter - and the quality can’t be any worse!
TrineoTech
Reviewed in the United States on February 24, 2020
Was looking for an hour meter for my backup generator, and ran into this unit. It has all the features I wanted(especially the replaceable battery!) at the price I wanted to pay. This is a rugged, very useful device to monitor the run time on the generator. It also has the handy feature of being able to set reminders for service, which is very important. Like the backlight feature, as it really helps when lighting is low in the campground. The RPM indicator is very accurate, and the ability to program previous hours is a huge plus to maintaining the service records on whatever you connect this to. You can't go wrong with this!!
Recommended Products