Your cart is empty.
Your cart is empty.Product Description: This product is made of high-quality stainless steel with a galvanizing process, ensuring a sturdy structure that guarantees the safety of your lamp tube. The galvanizing process also ensures that the product can be used for a long time without rusting. The material used has a certain strength, allowing for appropriate force to be applied during use, making it easier to adapt to the curvature of the lamp tube and facilitating installation. Product Composition: Stainless steel galvanized plate Color: Metallic silver Product Size: Length 1.5 inches, width 1 inch, thickness 0.8 inches Product Craftsmanship: Second-generation upgraded structure, with two support points and an air guide, ensuring the safety and longer-lasting use of the product. Packaging includes: 20 embedded lighting clips (usable for 10 lamp tube modifications) 22-24 self-tapping screws (normally 20 is sufficient, the extra screws are provided for replacement in case of loss or improper use during installation) The product's tip has been treated with a blunting and polishing process, and there are no sharp edges to worry about during use. The self-tapping screws are small and sharp, so please keep them away from children.
Ken
Reviewed in the United States on March 8, 2025
Everything arrived quickly and as advertised. Installation was pretty simple but I was working on a six inch recessed can so I had room enough to get my hand in the can. My Skil 12v impact driver was also small enough to fit in the six inch can without the need for a 90 degree adapter. The added light that the driver provided was also helpful. I did need to use a punch to create a dent in the metal can so the screws didn't wonder around. The only thing that might have made the job a little easier would be if the screw head could fit a socket. The screw heads are round so I used a Phillips head bit in my driver and it all worked fine. I would recommend punching a dent in the can, drive the sheet metal screw in, then remove the screw and add the c-clip, then screw it back in. I measured 1.5 inches up from the bottom of the can to punch my screw hole.
Kram
Reviewed in the United States on February 19, 2025
Perfect for my needs. My sister had recessed cans that had a single spring hook at the top. Easy for me to install these on the sides of the cans to support the new retrofit surface-level LED lighting in her kitchen. I used the screws that came with the brackets and had no problem with them threading nor removal when I need to reset the location. Recommend
Leaport
Reviewed in the United States on February 18, 2025
Once attached the clips worked perfectly. The screws they provide to attach the clips to the can would not bite to hold tight, so I had to use other sheet metal screws to attach these
John Webster
Reviewed in the United States on January 3, 2025
Got retrofit LED for existing recessed cans. Old trim was different so the can had no clips on the sides for the pins on new lights. They wouldn’t stay in, then when they did it was crooked. These are prefect, screwed right on to the sides if the can. Snug fit now.
Scot B.
Reviewed in the United States on February 20, 2024
Once I got the hang of these and where to put them the job went quickly. I had to retro fit cans without clips to take Spring LED’s. I had to use a pins and then drill pilot holes for these cans. After that they worked great and the lights popped right in. I put the first one about 2 1/2 inches in but then realized I needed the spring to be able to open to get a tight fit. After that I went to about one inch in and they were easier to install and the lights fit better.
Sherry O'Halloran
Reviewed in the United States on December 2, 2024
This item was not installed in my ceiling light cans. The new LED upgrade lights require two on opposing sides of can to anchor spring holders of lights. Work great are a great value and easy to install with included screws.
Karl Witt
Reviewed in the United States on November 28, 2024
These clips were great when you are retrofitting, newer, LED lights into older traditional can lights that cannot accommodate the springs of the new lighting..
Ephraem
Reviewed in the United States on October 18, 2024
My home is about 20 years old. So I have the older style 6” recessed light housing. Without these clips I had no great way to install new led lights. These worked perfectly and I had my light installed in 10 mins!
Recommended Products
