Shopping Cart

Your cart is empty.

Your cart is empty.

Rockville D12 5000W Peak / 1400W RMS 2-Channel Class D Pro/DJ Amplifier, Perfect for Live Sound, Pro Audio, DJs

Free shipping on orders over $29.99

$249.95

$ 99 .00 $99.00

In Stock

About this item

  • Rockville D12 5000w Peak/1400w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp. LCD displays volume in dB per channel and operating temperature. 1.5U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (12A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz. THD + Noise @ 1Khz full power: <0.11%. Input Impedance: 10K Ohm Balanced. Input signal voltage: 638mV – 2.7V.
  • Power Ratings: RMS Power Output:. Stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 8 Ohm: 1 x 1400W. Peak Power Output:. Stereo 4 Ohm: 2 x 2500W Max. Bridged 8 Ohm: 1 x 5000W Max
  • Terminals: Input Terminals:. Combo jack (XLR and ¼”) A & B inputs. Output Terminals:. Banana binding post speaker output. Speak on output. XLR output to connect another amplifier or powered sub



Product Description

Rockville D12 5000w Peak/1400w RMS Power Amplifier 2 Channel Class D Pro/DJ Amp

D12

Features:

  • Rockville D12 5000w Peak/1400w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp
  • LCD displays volume in dB per channel and operating temperature
  • 1.5U rack space
  • Built in limiter protects your speakers from distortion and clipping
  • Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
  • Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
  • Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
  • Channel A & B Clipping Led Indicators
  • Channel A & B Separate Level Controls
  • Power, signal, clipping, and protection LED indicators on front of amp
  • Heavy duty rack mount ears with handles
  • Built-in variable high velocity quiet cooling fans
  • Maximum headroom for 4-ohm and 8-ohm Speakers
  • Level controls for precise setting and matching of sensitivity
  • Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
  • User serviceable fuse (12A, 250V)
  • Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz
  • THD + Noise @ 1Khz full power: <0.11%
  • Input Impedance: 10K Ohm Balanced
  • Input signal voltage: 638mV – 2.7V, Input sensitivity: 0.7v
  • Damping factor: ( 100Hz, 10w, 4 ohms): 43.6
  • Damping factor: (1Khz @ 8 ohm): >400:1
  • Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
  • Output impedance at speaker terminals: 0.0918 Ohms
  • Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.05%
  • Signal to Noise Ratio: > 100dB
  • SLEW RATE (input filter limited) : 40v/uS Power Requirements: 100V-240V / 50-60Hz
  • Weight: 9.7 lbs, Dimensions: 19.09 x 9 x 2.56 inch

Power Ratings:

RMS Power Output:

  • Stereo 8 Ohm: 2 x 500W
  • Stereo 4 Ohm: 2 x 700W
  • Bridged 8 Ohm: 1 x 1400W

Peak Power Output:

  • Stereo 4 Ohm: 2 x 2500W Max
  • Bridged 8 Ohm: 1 x 5000W Max

​​Terminals:

Input Terminals:

  • Combo jack (XLR and ¼”) A & B inputs

Output Terminals:

  • Banana binding post speaker output
  • Speak on output
  • XLR output to connect another amplifier or powered sub

Mart
Reviewed in the United States on February 4, 2025
Awesome amp for the money can play for hours and never gets hot
Mouse Guy
Reviewed in the United States on September 8, 2024
I’m running 4x 400w peak 4ohm subs on this (two in series per channel) with an external DSP. Works great, shakes the floor, no complaints.
adamlbenson
Reviewed in the United States on May 5, 2024
This is pretty close to rated power i have had it a little over a year and still going strong pushin to polk s60 signatur elites rated at 350 rms each this amp is quite a bit more power than they will handle and i drive it hard every day no problems and they pound and it run fairly cool great for the price good and clean sound as well.
sdk
Reviewed in the United States on October 14, 2024
The media could not be loaded.
Mark P.
Reviewed in the United States on April 27, 2024
It's got the power, clear and clean. However the build quality is just not there. First we had to modify the rack ears because they did not match the hole separation on the rack. It wasn't the rack because the good quality devices matched just fine.The one of the XLR input doesn't release the cable when the tab is pressed. Took allot of fiddling to get it out again. If I wasn't using it in a rack where I never need to unplug them I would have returned it.Now I am finding the option switches on the back for cross over and stereo/bridging will change position way too easy. Gonna have to tape them so they don't get knocked.Would recommend to spend $50 more and get something else. We will be replacing this as soon as we can, maybe keep it as an emergency backup.
Jorge Alejandro Hernández Suárez
Reviewed in Mexico on July 25, 2023
Buen aparato
Israel
Reviewed in Mexico on July 21, 2023
Lo ocupo para mi grupo musical, conectando 2 grabes de 18 y suena muy bien para no castigarlo mucho. Lo recomiendo ampliamente.
Kaiti
Reviewed in the United States on January 25, 2023
I use D12 to fix my Klipsch SPL-150(amplifier malfunction), and it works as expected.If Rockville could add 1.Unit of Celsius for temperature monitoring 2.Dimmer for LCD display, it would be even better.
Business Professional
Reviewed in the United States on July 10, 2022
Earlier I reviewed the D12 amp which uses Class D power just like this one however this review is for the D14. This amp is obviously more powerful but to me it sounds cleaner. I tested it with the same 4 subs I tested the D12 with and it thumped way better. Tighter cleaner bass and much lower lows without clipping. I also tested it with the same pair of full range passive speakers and the sound is still very clear. Still runs cooler than the regular RPA model and it's much lighter than the RPA but heavier than the D12. According to the specs, it puts out 600W RMS more than the D12 but it sounds like more than that to me. If you're in the market for purchasing these, I would choose the D14 over the D12. I'm probably going to get another D14 and repurpose the D12. I really like the sound of the D14.
anonymous
Reviewed in the United States on January 12, 2022
The media could not be loaded.