Your cart is empty.
Your cart is empty.Product Description
RioRand 2PCS 100 MHz Oscilloscope Probe
- Interchangeable Probe Tip. Modular Construction.
- High Input Impedance. (X10 Range)
- Low power consumption and energy-saving.
- High sensitivity, excellent performance and reliable function.
Steve
Reviewed in the United States on March 9, 2025
Very cheaply made. Both probes have failed/broken near the BNC connector.
Tom Pownall
Reviewed in the United States on January 5, 2025
I would buy again if the need comes again.
MM
Reviewed in the United States on June 6, 2024
Very good product! Thank you.
Dakota Caler
Reviewed in the United States on August 8, 2023
I bought these for my Tektronix 2445A scope, this is an analog scope with a range of up to 150mhz so nothing too intense. These probes work perfect for it. I imagine if you're working on something that can work at +500mhz, noise sensitive projects, or other extremely fast and subtle signalling these probably aren't up to that kind of a job. I performed a few tests to make sure they were working properly, and luckily they seemed perfect out of box though I've only tested them up to 50mhz at ~100mv.Pros.1. Probes come in pair with ground clips and hook tips.2. Probes are built well and feel solidCons.1. Adjusting probe compensation seems to not effect anything when atten is switched to 10x2. 10x atten does not pick up at all. One probe its open and always at 0v and the other I lose the beam on no matter the division set for voltage or time. (I dont need this for what I do , but you may).Conclusion:If you need a stand in, these are perfectly fine. If you need something for high frequency, or for the 10x attenuation, dont bother. It works great on my analog scope, So I assume these will work fine for most modern full digital scopes if you're just doing simple hobby stuff.
Sean Dickinson
Reviewed in Canada on January 16, 2020
good value to replace old or missing scope leads
Ralph Garnett
Reviewed in Canada on February 19, 2019
Good quality for the price. Calibration requires some equipment to produce accurate readings
BlondieSL
Reviewed in Canada on December 8, 2019
I use these on an old scope and they work well. Easy to adjust.
Gambrill Services
Reviewed in the United States on December 21, 2019
These are OK starter probes for your second hand Oscilloscope. They seem to calibrate to clean edges, and do not appear to distort the waveform at the frequencies they are designed for. You'll probably want something better later on, but these will get you going. These would be good to have if you ever take your scope onsite or if you loan it to a friend. They are not too expensive to lose.The ground leads are a little long, and mine didn't come with the spring grounds pictured in the manual. But I really can't complain.I ended up getting two sets to use for SPI protocol analysis, so I can honestly say I would buy again ( I actually did).
SS
Reviewed in Canada on November 7, 2019
Excellent product. Well made seems to be of great quality. quick delivery
VE7JAI
Reviewed in Canada on April 19, 2019
Nice product. works great
kbulgrien
Reviewed in the United States on June 25, 2017
The probes work as expected and the items included are as shown. The probes are 1x/10x switchable. I appreciate the completeness of the kit: probe color markers, grabber tips, and the (yellow) tip shields that make it easier to avoid accidentally shorting adjacent signals while probing. The kit includes a pouch with specification sheet so all the items may be kept together while unused. The black item appears to be a tuning tool (screwdriver) that one might use to calibrate the probes.
C. Hill
Reviewed in the United States on September 16, 2012
The 100MHz Oscilloscope Probes are good quality and work nicely on our Tektronix 60MHz o-scope. Each probe set comes with the probe, a detachable clip top, a ground clip, color bands, and a tuning tool. We connected the probes to the scope, took readings from the calibration output, and used the tuning tool to adjust the probe for a nice clean square wave. The whole process took less than a minute.These are good quality and a good value!Highly Recommended!CFH
Ctech's Dad
Reviewed in the United States on December 28, 2012
Having worked with oscilloscopes for the past 20 years, I was really shocked with how well built these were. They seem well put together, came with the color coding rings to make identification easy and have the compensation adjustment point built into the end by the BNC connector. We are using these with a Vellemen oscilloscope / function generator and are quite pleased. Please note, these are not comparable to new probes for something like a LeCroy, Tektronix or Aglient oscilloscope, but work quite well if you are doing hobbyist level work, or just playing.
Recommended Products