Your cart is empty.
Your cart is empty.Product Description
- Fit stihl MS210 MS230 MS350 021 023 025
- Package includes: 1 x Oil Filter, 1 x Hose Tube
- Note: it can NOT fit the chainsaw produced before 2000 years.
Rodney Allsbrooks
Reviewed in the United States on January 26, 2025
My ms250 fuel line needed replacing due to leaking. This new fuel line is slightly different but worked like a charm. You have to use the supplied filter/strainer because the line bottlenecks down to a smaller size than the oem filter but it seems good quality and I am on my 2nd tank of gas with no issues.
Rodney Allsbrooks
Reviewed in the United States on January 26, 2025
My ms250 fuel line needed replacing due to leaking. This new fuel line is slightly different but worked like a charm. You have to use the supplied filter/strainer because the line bottlenecks down to a smaller size than the oem filter but it seems good quality and I am on my 2nd tank of gas with no issues.
Johnny Rexrode
Reviewed in the United States on November 6, 2024
Easy installed. Fit perfectly
Johnny Rexrode
Reviewed in the United States on November 6, 2024
Easy installed. Fit perfectly
Lucille
Reviewed in Canada on November 2, 2024
Très bon produit merci
Lucille
Reviewed in Canada on November 2, 2024
Très bon produit merci
Robert C. Webb
Reviewed in the United States on November 10, 2024
FIT GREAT EASY TO REPLACE
Robert C. Webb
Reviewed in the United States on November 10, 2024
FIT GREAT EASY TO REPLACE
B. Powers
Reviewed in the United States on August 14, 2023
Purchased for an MS250 chainsaw. The fitment on the carburetor nipple was pretty loose so I ended up having to use a small tubing clamp to secure it in place. Other than that, it fit the tank as expected. Overall it's a good value for the money.
B. Powers
Reviewed in the United States on August 14, 2023
Purchased for an MS250 chainsaw. The fitment on the carburetor nipple was pretty loose so I ended up having to use a small tubing clamp to secure it in place. Other than that, it fit the tank as expected. Overall it's a good value for the money.
Vietvet68
Reviewed in the United States on April 2, 2023
This was an exact replacement for the fuel line in my Stihl MS250. It replaced one that had hardened and would no longer seal the gas tank due to ethanol fuel. The part was soft and pliable making installation easier. The part also has a flat edge that must be aligned correctly for the saw to operate when at an angle. Not sure how long the part will last but at this point I would buy it again.
Vietvet68
Reviewed in the United States on April 2, 2023
This was an exact replacement for the fuel line in my Stihl MS250. It replaced one that had hardened and would no longer seal the gas tank due to ethanol fuel. The part was soft and pliable making installation easier. The part also has a flat edge that must be aligned correctly for the saw to operate when at an angle. Not sure how long the part will last but at this point I would buy it again.
Karie Lake
Reviewed in the United States on October 10, 2022
The product which was shipped was unusable and torn. I requested a replacement on 10/10/2022 and will update this post if the second fuel line is a new product.
Karie Lake
Reviewed in the United States on October 10, 2022
The product which was shipped was unusable and torn. I requested a replacement on 10/10/2022 and will update this post if the second fuel line is a new product.
A. Shaver
Reviewed in the United States on April 19, 2022
Wipes 2cycle oil on plug. Used flat handle of old toothbrush to gently push in. It immediately grabbed on both sides and sealed. Put on new fuel filter, connected back up. Filled with gas.Put saw on side for 5 minutes. Not a single leak from fuel tank.Started up. Was able to properly tune the carburetor (prior line did not seal the tank so fuel ran too rich).Thank you. Great product.Replaced on an MS250.
A. Shaver
Reviewed in the United States on April 19, 2022
Wipes 2cycle oil on plug. Used flat handle of old toothbrush to gently push in. It immediately grabbed on both sides and sealed. Put on new fuel filter, connected back up. Filled with gas.Put saw on side for 5 minutes. Not a single leak from fuel tank.Started up. Was able to properly tune the carburetor (prior line did not seal the tank so fuel ran too rich).Thank you. Great product.Replaced on an MS250.
カスタマー
Reviewed in Japan on December 5, 2021
劣化と思われる亀裂による燃料もれ確認。直ぐに交換できました。
カスタマー
Reviewed in Japan on December 5, 2021
劣化と思われる亀裂による燃料もれ確認。直ぐに交換できました。
福沢諭吉
Reviewed in Japan on May 31, 2020
ちゃんと使えた。
福沢諭吉
Reviewed in Japan on May 31, 2020
ちゃんと使えた。
Ku:
Reviewed in Japan on October 26, 2020
サイズも問題無く、取り付け完了しました。
Ku:
Reviewed in Japan on October 26, 2020
サイズも問題無く、取り付け完了しました。
クリスティーヌ
Reviewed in Japan on October 1, 2020
慣れて来るとあまり分解しなくても取り付け出来ますしポンプも交換すればベストだと思います、廃棄しようと思ったスチルチェーンソーが2台復活しました、ありがとうございました。
クリスティーヌ
Reviewed in Japan on October 1, 2020
慣れて来るとあまり分解しなくても取り付け出来ますしポンプも交換すればベストだと思います、廃棄しようと思ったスチルチェーンソーが2台復活しました、ありがとうございました。
Lawrence Bilodeau
Reviewed in the United States on May 20, 2019
Used on a Stihl 025 that wouldn’t start. The original fuel line and filter were ruined from the saw sitting for years with gas/oil mix with 10% ethanol in the gas. YouTube videos helped with the installation but look at several because some of them are incorrect or they skip key instructions. Getting the rubber flange snapped into the hole in the top of the gas tank was very difficult because of the design of the saw. Because the new line has no fuel in it I primed the cylinder with fuel/oil mix to reduce the amount of cord pulls to fuel into the carb. The saw starts and runs great now. I have noticed that many reviews do not mention the saw that they are installing it in. Because of variations between models it would help. I also see too many reviews where people mention that “It wouldn’t fit”.
Lawrence Bilodeau
Reviewed in the United States on May 20, 2019
Used on a Stihl 025 that wouldn’t start. The original fuel line and filter were ruined from the saw sitting for years with gas/oil mix with 10% ethanol in the gas. YouTube videos helped with the installation but look at several because some of them are incorrect or they skip key instructions. Getting the rubber flange snapped into the hole in the top of the gas tank was very difficult because of the design of the saw. Because the new line has no fuel in it I primed the cylinder with fuel/oil mix to reduce the amount of cord pulls to fuel into the carb. The saw starts and runs great now. I have noticed that many reviews do not mention the saw that they are installing it in. Because of variations between models it would help. I also see too many reviews where people mention that “It wouldn’t fit”.
Recommended Products