Your cart is empty.
Your cart is empty.Product Description
Calibrating Accuracy
The M1 Caliber must be calibrated to match your tape measure. the calibration process involves moving a piece of material 6 feet (or 2m) to ensure the rotary signal perfectly matches the linear distance traveled.
Quick Clamping
The clamping action on the M1 Caliber ensures the M1 stays where it is mounted and securely positions itself. The measuring arm automatically adjusts to the material height slid underneath it. The M1 can clamp to both the left and right side of the saw fence
Metric and English Units
The M1 Caliber can display most english and metric units including, inches fractional, inches decimal, feet, millimeters, centimeters, and meters.
Blade Compensation
The blade width can be programmed into the M1 and saved to ensure that it is always compensated for when making repeat cuts.
Lance tes travaux
Reviewed in France on February 21, 2025
Produit super top
Tim
Reviewed in the United States on February 20, 2025
Been using this thing for few years now. Simple and easy to use. Glad I purchase makes cutting to size great and if so it right get same length all the time. I would highly recommend if your looking but oneI would buy again
Paul C.
Reviewed in the United States on January 26, 2025
If you are doing one or hundred cuts, this is nice for continuous accuracy.
Kamps78
Reviewed in Spain on January 12, 2025
Tal cuál se describe.Muy preciso y útil para cortes repetitivos.Envío muy rápido.
Kindle-Kunde
Reviewed in Germany on January 12, 2025
Super Buch
rwizard
Reviewed in the United States on February 2, 2024
Well, after struggling to add DROs to a metal lathe, mill, and drill press, I looked at this and thought "easy-peasy". It says "just clamp on the fence". My miter saw has a fence, I can do this. Except, it turns out that the fence is just a tiny bit too thick for the clamp to lock on. No problem I thought, they have an adapter plate, I'll order that. Turns out the "plate" is a pair of fairly thick slabs of prticle board, one of which has a small metal tab to clamp the device on. It also comes with a fairly random bag of screws and no instructions. I did a trial fit and found that (1) it interferes slightly with the in-feed clamp unless I off set it substantially to the right and (2) it takes up needed space in the work area. Kind of like having a sacrificial fence that you have no need for. So, next plan is to find a piece of aluminum that the clamp likes, fasten that to the back of my fence (possibly with epoxy to avoid having to countersink screws in a not all that thick fence) and yeah, this thing is a snap to install, just clip it on and go! I guess I'll never learn. Hope this helps someone. We fools rush in where fools have been before ; )
Reza Setayesch
Reviewed in the United States on December 8, 2024
I couldn't belive until I used it. The accuracy is so high and easy use. The material is high quality. I hope their new Tape measure comes out (the chip one) and I can ordered it immediately
Michele Giuffria
Reviewed in the United States on December 8, 2024
My husband Loves this product. He always knows exactly where it is!
Jeffrey SCIOLLA
Reviewed in the United States on December 20, 2024
Absolutely terrible product. Iv tried numerous times to set this thing up and all goes well at first but blade thickness does not store and measurement is never accurate. I would not recommend this product to anyone it is more work than it’s worth. I’ll stick with the simple measure 2x cut once method.
Aaa
Reviewed in the United States on December 16, 2024
Almost as fast as using stop blocks but for measuring individual random cuts it's really accurate. Easy to set up and use.
Josh K.
Reviewed in the United States on October 26, 2024
I'll give you all a moment to stop gigglingThe Reekon M1 is one of a few items over the past couple years that I saw used on Youtube that turned into a serious game changer.====> AS LONG AS YOU SET IT UP AND CALIBRATE IT PROPERLY! I have a Bosch GCM12SD Miter saw and quickly found out it was not immediately compatible. My fences don't have a proper spot to clamp onto so I had to purchase their adapter fences and mount them first. Annoying yes, but not a deal breaker. In reality i maybe could have researched that but I was a bit too excited. Either way once you get the blade kerf dialed in and your first calibration cut out of the way, you are on your way to perfect repeatable cuts. Its also super portable, I brought it with me to my Brother-in-laws and mounted it on his Metabo miter saw while helping him build a fence.Pros: Easy to read display, super accurate, vastly speeds up my cut lists, and comes in a nice foam storage case.Cons: For the cost they could have included the 2 AA batteries needed, make sure the piece you are cutting doesn't have major depressions or knot holes in the path of the measurement wheel ( the wheels distance traveled will be different from the straight length ), and you may not know if your saw is 100% compatible until you're there with the device in hand
John Hunter
Reviewed in Canada on January 31, 2024
I had my first one work great until a kickback blew it of my saw. It hit the wall and broke a clamp and would not even turn on.My fault.I ordered a second one. Well the wheel was running crooked and would just stop turning. I have returned it. Dont know if i will order another one
Azael Tinoco
Reviewed in Mexico on January 15, 2022
Me gusto
Recommended Products