Shopping Cart

Your cart is empty.

Your cart is empty.

R632A-CFF Integral 2-Stage Regulator, 9-13' W.C Spring, 1/4' x 3/4' NPT

Free shipping on orders over $29.99

$96.44

$ 41 .99 $41.99

In Stock

About this item

  • Body Sizes and End Connection Styles (inlet x outlet): 1/4 x 3/4-inch FNPT
  • Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
  • Outlet Pressure Ranges : 9 to 13-inches W.C / 22 to 32 mbar
  • Capacity : 950,000 BTU/hr.Weight With FPOL: 2.9 lbs
  • Vent Size : 1st Stage : 7/16-24 Inverted Flare | 2nd Stage : 3/4 NPT screened


The Type R632A is an Underwriters Laboratories (UL) listed regulator designed for Two-Stage LP-Gas systems. The unit is designed to reduce the tank pressure through an integral two-stage system to 11 inches w.c. / 27.4 mbar. The first-stage screened drip-lip vent is oriented downward and the second-stage vent is oriented over the outlet as standard.

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.


dare901
Reviewed in the United States on January 29, 2025
First one arrived with rough damaged thread. Needed lots of thread sealant and three tries to get it to not leak. Then gauged at 13.5 (supposed to be factory set at 11 with a range of 9-13 wc) Set it to eleven. WC dropped 2-3 during demand. Returned/exchanged.Second One: threads were perfect. Regulator came set slightly above 12. During demand drops only 1/2 to 1. Company should aim for +/- .5 or better on factory setting.I’ll leave it at 4 (should probably be 3 since we’re dealing with gas here and one wants confidence in such devices. There were others that are cheaper. Paid more hoping for a basic good regulator), but 4 star for now but will be keeping an eye on the thing. Hopefully it doesn’t fail in 6-12 months….sigh. Amazon…all products in general these days. I didn’t bother with local (Ferguson) cuz they’re not exactly user friendly. So the easy (though time consuming) exchange process lands it at 4 with hope of getting 4+5 years out of it. My old one was 20 or so years old and yes made in China so go China’s not always bad. This one is from Mexico. I don’t it matters much where things are made anymore. What matters is the design/engineering/materials and management/oversight/quality control.Anyway….
Shane
Reviewed in the United States on July 16, 2024
Replaced the 30-year-old "Stinky" regulator.Simple Simon.No adjustment required.Now I have the perfect pressure and a brand-new regulator.At an amazing price from Amazon.It took all of 5 minutes with some wrenches.Note: Your needs may be different.
Jeff Barrentine
Reviewed in the United States on July 14, 2024
The pilot flame on our wall heaters would not stay lit. Replaced our regulator with this one and solved the problem.
Janna R Sundrup
Reviewed in the United States on February 4, 2024
Works great so far! Very pleased!
Gigi's Reads
Reviewed in the United States on October 31, 2024
Was just like the one we had.
Barona
Reviewed in the United States on June 26, 2023
Straight forward replacement of prior regulator. Home LP flow has improved since installation.Pricing constantly shifting on these regulators... from one day to the next, best value was 1/4" NPT version, then the FPOL version. Got lucky and saved almost $40 by going NPT.Hardest part was finding proper replacement Hogtail.
Customer
Reviewed in the United States on November 3, 2023
A quality product, Used this on propane tank for my gas fireplace, It is very well made not like the cheep China knockoffs
frank castillo
Reviewed in the United States on July 16, 2020
Came as described, good price, fast shipping. Used for propane hookup to house. Gas Oven and stove , and gas dryer.Dont forget , if you are going to convert your house to LP (liquid propane) from NG (Natural gas ) , then you will need to change the orifice on all the appliances. Most gas ranges come with the LP kit or can always be ordered online.
Recommended Products

$111.99

$ 53 .99 $53.99

4.9
Select Option

$100.00

$ 41 .99 $41.99

4.4
Select Option

$105.41

$ 51 .99 $51.99

4.7
Select Option

$23.23

$ 10 .99 $10.99

4.6
Select Option

$1,214.99

$ 99 .00 $99.00

4.6
Select Option