Your cart is empty.
Your cart is empty.Product Description
Installation Steps:
- Find the correct window sill position.
- Find mounting holes.
- Assemble Connector Bar with support body and drilling 5/32" *2" screwing holes into window sill.
- Align and Mount to Sill. See if A/C Support shelf will clear all obstacles on sill,using Rounded Spacer, Flat Spacer(s) and Block.
- Place end of leg flat against underside of shelf . Position Leg foot pad against exterior surface.
- Final Mounting. Slightly tilt for draining condensation of moisture.
Qualward Window Air Conditioner Support Bracket Heavy Duty Support AC
Features
- Install from inside the house
- Takes the pressure and weight off the window sill
- Minimizes the chance of damage to the window, window parts or outside wall
- Solid epoxy-coated thick steel plate, matte surface prevent the A/C to drop out of the window
- Works with any brand name Window Mounted Air Conditioner
Window Requirements
- Window sill thickness cannot exceed 16 inches
- Window sill must be a minimum of 2 inches deep
- Window sill must be able to accept 2 1/2 inches long screws
- Sliding window lip or window stool cannot exceed 1 7/8 inches
- Cannot be used with slide casement or casement windows
Block & Spacer
The spacer can be adjusted on the block according to the inclination of the window sill to keep the balance of the brace so that the bracket can be installed well on window sill.
Rubber Mounts
Full-rubber mounts design can be better fit the siding wall and make the bracket stable and firm.No damage to outside wall.
High-density Meterial
Solid epoxy-coated thick steel plate prevent rust and rot,matte surface prevent the A/C to drop out of the window
Window&Wall
Works with any brand name Window Mounted Air Conditioner（check installation steps for window requirements），Fits wall thickness from 2" to 15.2"
Christina poor
Reviewed in the United States on March 1, 2025
Perfect... nice & strong & secure
Very strong and stable,
Reviewed in Australia on January 22, 2025
Al
Reviewed in the United States on September 7, 2024
Our window unit held up just fine without this, but we remove the unit in the fall and reinstall in the spring. It is located on the third floor so it was always a hassle to install and remove. This inexpensive item makes this task a breeze. Wish I would have purchased it along time ago. Good quality with plenty of hardware for installation.
Placeholder
Reviewed in the United States on August 25, 2024
EASY! The most time consuming part was adjusting the angle of the legs to fit the house.AND WHERE DO THE CLIP PINS FIT!#Could not find this in the directions or online. Videos don't address this either.Its over priced, or I would have bought multiples.Clean, sleek and sturdy!
Cindy Roberts
Reviewed in the United States on July 11, 2024
I bought this to hopefully make the installation of a 10,000 btu unit easier in a vinyl window. In past years I have had to use scraps of wood under the back of the unit in the window and a 2x4 length to support the back of the unit where it is furthest from the house. The instruction sheet was a bit lacking, but after watching the video I figured it out. This doesn't have any levels built into the frame, but I don't think this will be a problem, I can use a level to make sure it is tipped slightly towards the back for proper drainage.Some of the other reviews must be for other, similar products because this does not have blocks that need to be screwed into the window, nor do you have to use any tools to assemble this.I don't have anyone to help me with the installation today, but should get someone before the weekend is over. I will update this if we find that it doesn't work like it should! Edit: Installed A/C unit today and this works great! Once we put it in the window, it was very easy to check the level of the frame and adjust it to tip back slightly for drainage. Very easy to put the unit in the window and not worry about having someone hanging on to it so it wouldn't fall until the window was closed. I will most likely order another one of these to use with my upstairs A/C next spring.
Matthew Dawson
Reviewed in the United States on June 3, 2024
Directions for this item are severely lacking. I used the video on the product page to get a better idea of what to do, but even then had to improvise. The cotter pins won't go in unless the spring pin is flipped so that the spring doesn't block the holes. The anti slip brackets cannot be installed as shown in the video. Ended up bending the tab on the bracket so that it could get close to matching what the video shows with the bracket sticking up and the two smaller tabs resting on the main arms. Once I worked through the assembly the end product certainly seems sturdy. Overall I think the price on this item is high, especially with the installation challenges.
Susan S
Reviewed in the United States on December 15, 2024
Our contractor decided to take the easy way out and we hadn't noticed at first as lake house is closed in winter. His work was first-rate; the shelf was something from recycling. Awful.Simple installation, adjustable fit, and appears to be total maintenance free. Doing what it's supposed to.
Buyer
Reviewed in Australia on November 12, 2024
Great product
p.wills
Reviewed in the United States on October 4, 2024
Sturdy, easy push pin assembly. Instructions are clear. Locks into place easily. High quality finish. Slide bars insert into window frame. Solidly constructed of strong, painted metal. Adjusts yo fit window. Decent weight metal. Rubber angle support feet protect house exterior. You'll be happy with this support.
Donna W.
Reviewed in the United States on October 24, 2024
The window bracket was easy to install and worked perfect for my 12,000 btu AC.
Gilles Gagne
Reviewed in Canada on November 9, 2022
Pour l air climatisé
Burnaby hooligans
Reviewed in Canada on July 8, 2021
Instructions were terrible but with perseverance it does a wonderful job. Very sturdy and strong.
Customer
Reviewed in Canada on July 30, 2021
Great system, easy to install.
Recommended Products
$36.99
$ 18 .99 $18.99