Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #121,166 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
- #24 in Rain Barrel Diverters
Sturdy PVC material with high-quality thread design, good sealing, not easy to leak, easy to install. Temperature range is from 40 to 140 °F
Max pressure is 150 PSI
Requires 1.6 inch hole saw or spade bit.
Package include:
1 x PVC ball valve
1 x PVC bulkhead fitting adapter
1 x PVC hose adapter
NOTE: Please allow slight dimensional error caused by manual measurement,
and the kit not fit to the 3/4"garden hose,
Requires GHT to NPT adapter to install 3/4" garden hose.
David D.
Reviewed in the United States on February 8, 2025
My dad used these for his rain catcher barrel thing a majig and he was satisfied.
Rick Brown
Reviewed in the United States on February 27, 2025
Excellent
CCTC
Reviewed in the United States on January 4, 2025
Provides a convenient way to access stored rainwater, allowing you to easily fill watering cans or connect a hose for garden irrigation.Over time, spigots can become clogged with debris or develop leaks, requiring occasional maintenance.
Qian
Reviewed in the United States on August 24, 2024
The valve appears to be of good quality and is easy to install. However, the screw doesn't seal properly and consistently leaks. I had to use a significant amount of pipe tape to resolve the issue.
C Lee
Reviewed in the United States on May 16, 2024
These are nice spigots.Their beefiness make off/on operations really easy, and they don't look half bad in the barrels.The threaded ends allowed me to use standard PVC threaded ends to pipe in to an irrigation feed line.1.5inch hole saw on the drill made short work of the plastic barrel and made for a nice snug fit.My only gripe is that I didn't have a large enough set of channel locks at the time to snug them up a bit better.I have a very slow drip that I can't get to until I empty the barrel enough where I'm up to my shoulder in rainwater.
K. Faber
Reviewed in the United States on February 22, 2024
This valve although made from plastic, is very study and very thick. You will need at least a 1.5 inch hole saw to install. The shut off valve operates very smoothly. I liked that I only need one wrench to install - as it makes the process much easier. Tips when installing: remove the gasket and wrap teflon tape generously around the threads then replace the gasket. Do the same same for the threads on the valve piece. Since I was attaching it to curved surface (55 gallon plastic barrel), I was worried that I would have trouble making a leak proof seal, but the teflon tape makes all the difference. Time will tell how long it lasts outdoors in the sun, but the build quality gives me confidence.
Robert White
Reviewed in the United States on December 18, 2024
Seemed better quality than my local hardware stuff.
Works great
Reviewed in the United States on October 8, 2024
Put on a barrel to use as a keg bath, seal doesnt leak and it was east to put on.
Recommended Products
