Your cart is empty.
Your cart is empty.Product Description
Keichia Paxton
Reviewed in the United States on February 17, 2025
Worked well. Decent product. Pump was convenient
mechia
Reviewed in the United States on August 5, 2024
I have tried several different types of resin epoxy. This is the best epoxy ever. It is very easy to use. Make sure to have the right 1:1 ratio. It is definitely self leveling. It has little to no bubbles and the few bubbles you have are easy to remove with heat gun. Most times a heat gun is not required. Drying time varies. From my experience, if you use a heat mat or some type of heating element it will be completely cured in about 6 hours. Be sure to let completely cool before demolding. When you just let it sit and dry with no extra use of a heating element it took about 24 hours to cure completely. I have made several things using this product and it has not disappointed me yet! have been extremely satisfied with this product and refuse to use any other resin. The only thing that was noticed is the bottles are not equally full. Not that big of a deal to me! Definitely worth the purchase. You will not be disappointed!
Lee
Reviewed in the United Kingdom on August 2, 2024
I have been using this resin for casting plant pots of various sizes, it dries with a lovely clarity and I don't get many bubbles. I have also had success polishing this resin when I've needed to shape it to get a decent finish.The dispensers are easy to use and help with getting a reasonably accurate ratio, just need to remember to lock the pump with your last push.Good quality and good value for money
Belinda
Reviewed in the United States on June 9, 2024
I love, love, love this resin. The pumps are easy to use and it's so great that they come with little caps to prevent drips. The resin degasses really well in my Resiners bubble remover and the results are absolutely crystal clear and so shiny. It does take a couple of days to fully set where it won't stick to itself but demolds within hours. This is my new go-to!
Michelle
Reviewed in the United Kingdom on May 7, 2024
No pumps with them , when measured not a gallonFalse advertising
melanie
Reviewed in the United Kingdom on October 22, 2024
This epoxy resin is affordable and good quality. I have purchased this twice and both times it came with pumps. I love this resin as it's bubble free and has a high gloss shine. Easy to work with. I can only recommend
phyrenayice
Reviewed in the United States on September 26, 2022
Alright, I've gone through an entire gallon kit of this resin and feel fully qualified to write a decent review. I've tried several different brands (okay, like 6, but still) and truth be told, this is my least favorite so far. It's not terrible, don't get me wrong, and it serves its purpose just fine, but there are some intricacies about it that make it a little bit hard to work with.Let's start with the pros:-Fairly long pot time (a least 40 minutes), so you can work slowly-no discernable smell really-crystal clear once fully cured-reasonably pricedNow for the cons, or those intricacies I was talking about:-Extremely long cure time - I'm talking like 72 hours over here. It's demoldable long before that, but to get from poured to sandable, it consistently took at least 3 days. That could be due to the weather here though, so I'll give them the benefit of the doubt.-Kinda thick, not crazy thick, but it takes a while for the bubbles to release. I'm not a patient stirrer, so this is especially annoying for me. If you are, then this shouldn't be a problem for you.-For the love of god, please PLEASE use mold release. With every other brand of resin I have used, I have never needed mold release and have never used it. I cannot tell you how many of my molds have been damaged or even ruined by this resin because I failed to use mold release. Since this is the only one I've needed mold release for, that's a pretty big inconvenience for me. If you are a faithful user of mold release, this won't be a problem for you either.Overall, this is a decent resin, but I won't use it again because it's just not for me. I'm not patient enough for this stuff. I give it four stars because I know it works well if you can work around its quirks.
ResinGem
Reviewed in the United States on August 28, 2022
I'm a beginner when it comes to resin, and I actually like this resin a lot. Wanted to get a bigger resin kit than the one I had before and this was recommended. Before I work with it I give the bottles a warm water bath, pour it out in measured cups and mix slowly. I don't do the transfer method they say in the instructions, I just mix for a minute or two extra while scraping the sides and bottom of the cup. Takes mica powders well and glow pigment glitters. Virtually bubble free to me using the method that I use, any bubbles I get while mixing rises to the top of the mixing cup after I mix and let it rest for a bit. Will keep buying this! Low odor even though I still wear a respirator when working with resin, good quality and none of my pieces have come out soft like it used to happen at times with the resin I used before.
Luchi
Reviewed in the United Kingdom on May 10, 2022
Excellent product, the best resin I have used so far and believe me I have tried a few.... minimal bubbles after pour, no odour, fast drying time.
Customer
Reviewed in the United States on October 4, 2022
Mixes quickly and virtually absolutely bubble free. I have used many other brands and the bubbles were terrible. The work time is about 30 minutes and soft cures in about 8-10 hours. Hard cures in 24 hours. It is crystal clear and shines beautifully. In cold weather, make sure you either hold the cup of mixed resin with your warm hand or put it in a warm water bath. If your resin is not curing then it was too cold, not mixed thoroughly, or you did not measure each part. I cannot stress how important it is to weigh each part. Get a cheap gram scale, resin is expensive!
katherine kusuma
Reviewed in Singapore on May 26, 2021
A new resin favorite. Good pot life time to work with different works at a time, as described it does do its job to level, doesn't bubble much compared to other branded resins, harden up pretty fast and I just placed more order for this brand.It still does have a slight smell so the respirator is a must.
JBlazing
Reviewed in the United States on May 9, 2020
The media could not be loaded.
Recommended Products