Your cart is empty.
Your cart is empty.Product Description
Protectaclear 4oz size
Covers about 25 square feet of metal in one coat
Jewelry
Protect your jewelry from rust and corrosion
Before and After
Lockset before and after Protectaclear application.
Other items that can benefit from ProtectaClear
Art
Lamps
Furniture
Silverware
Customer
Reviewed in Canada on September 25, 2024
Works well, goes on well, not lobby, can't tell it's on your jewelry!
Vincent Tan Yee Ping
Reviewed in Singapore on December 9, 2024
Easy to use as the liquid is self leveling.
me
Reviewed in the United States on December 2, 2024
My bathroom sink has a polished brass drain stopper that had become badly tarnished over the past 25 years, and I wanted to correct that without replacing the stopper and surrounding ring. I closed the stopper and poured just enough vinegar to cover it, and let it sit for days. It did help with the tarnish, but also removed most of the protective coating on the metal, and the tarnish returned. After my research landed on ProtectaClear, I read all the instructions on the Everbrite website and decided to give it a try. I scrubbed the stopper and surrounding ring with Bar Keepers Friend until the tarnish and remaining coating was removed, and it looked shiny and great. I used a tiny craft brush to apply Acetone as a solvent, which evaporates immediately. I used another tiny craft brush to “paint” ProtectaClear onto the stopper and surrounding ring, careful not to get it on the cultured marble sink. In the bottle, it looks as fluid as water, but I was very pleased that it didn’t drip off the brush or flow down the drain, it stayed where I applied it. The surrounding ring took longer to dry than the stopper (probably because the stopper is contoured). I applied 4 coats. After 5 days (cure time) without using the sink, it looked exactly the same as when I finished, shiny and free of tarnish….Success! Water just beads up on the ProtectaClear coating now. Before and after pictures attached.
swrobert
Reviewed in the United States on January 1, 2023
Oura customer service provides little to no advice on how to protect your ring and the reps know very little of the build material which is important when figuring out enamels and/or protective clear coats.To preface I have the Oura Ring Gen 3 Horizon Rose Gold, and I wear it on my left hand index finger (non-dominant hand)I took a chance on ProtectaClear and very happy I did! I did 4 applications/layers (Did not apply/dip whole ring) by brushing on the outer layer. I wore latex gloves and put the ring on my index finger and did circular motions with a small sponge applicator on the face and edges of the ring, but avoiding the inside so it doesn't effect the sensors.I have wore the Oura Ring for a few months with the ProtectaClear and I have not been cautious on protecting it from objects or grabbing items because I want to truly see how well it protects the ring. I also wear the O. Sleeve (expensive but necessary) and Ring Wrapper (I wear both) when I workout/lift because I know the bars will 100% scratch it. Outside of lifting I do not wear the protection sleeves.Also to note the O. Sleeve and Ring Wrapper work amazingly during workouts and the Oura Ring doesn't get damaged. I have put 255lbs benching, 50+Lbs dumbbells, 170lbs double D Row Handle Attachment, etc and no issues at all. So I highly recommend this combo!Also, the ProtectaClear doesn't do anything to the color or make it less/more glossy. Which was something I didn't know how the ProtectaClear would or wouldn't do. I don't know how this would protect on the Matte Black/Stealth but I would assume it would turn the Matte look to a glossy look. So I would be cautious to use this on Stealth.The only thing I don't know about with ProtectaClear on the Oura Ring is how often do I need to reapply. I've seen anything from 6 Months to 2 years. I'm leaning more towards 6 Months for reapplication since forums reported that for heavily used metallics using ProtectaClear should reapply every 6 Months to 12 Months.Overall, very happy with ProtectaClear on my Oura Ring and have truly put this ring and ProtectaClear through a lot of wear and tear (banging it against hard items, grabbing keys/metallic items, etc) with literally no scratches. Simple water and wipe down will shine it back to normal to get smudges off the ring.Hopefully this helped because there isn't a lot of information out there to help Oura Ring owners to protect their ring.
AaronR
Reviewed in the United States on October 2, 2022
UPDATE: I left my original review below though I've updated my overall rating to 5 stars. Everbrite reached out and is sending me a replacement product. Awesome product (which I knew) and awesome customer service.ORIGINAL REVIEW:I really like this product so this is a difficult review to write. The product itself is the best on the market to seal and keep the bright finish on many metals. I have used it on brass, copper and bronze for years and it protects the metal and keeps it finished the way you want it. However, it is essential not to brush or dip from the original container to avoid introducing contaminants and other particulates that could make their way to your work piece. I always pour what I intend to use into a smaller container to use it. I generally use a glass or stainless steel container depending on what I intend to dip and never pour anything back to the original container. I've found that for bright finish metals, it works best when the work piece is dipped. Then you can use a cut piece of newspaper to wick away excess as gravity draws it to a hanging drop at the bottom of a work piece.The only other issue I have experienced is iridescence (rainbowing on the surface of brightly finished material). This can often be mitigated with another coat.The reason for this review has nothing to do with the product or how it works. The container failed in my case. In about a year, rust spots developed on the inside of the container. The outside of the can was in perfect shape. The rust on the inside of the can ruined the product by turning it a pale shade of brown with bits of rust particulates. Disappointed for the price that the container failed in about a year and ruined what was left of the product. Especially since I am so careful about using it and sealing it back up to avoid the introduction of contaminants. Next time I may resort to pouring the contents in a glass container with a lid. What is odd is that I've used the larger size 16oz and even 32oz containers over the same period of time in the past, which also come in steel containers, and never had this issue.
umesh
Reviewed in India on June 3, 2021
Very nice product
Christiane Forget
Reviewed in Canada on October 11, 2020
Ce produit fait ce pourquoi il est conçu, protéger le métal. J’ai acheté le plus petit format pour protéger de l’oxydation, les composantes en métal des bijoux que je fabrique. Je le recommande vraiment.
Pam
Reviewed in the United Kingdom on March 17, 2019
I haven't tried this product yet but everyone I no said it's great stuff so I will see.
Recommended Products