Your cart is empty.
Your cart is empty. Sumger RGY-200 Indoor Lasers - These are designed to be used inside homes, clubs, bars, etc. They typically have lower output powers, to be safe for indoor environments. The casing protects the laser from moisture. It can handle simple outdoor activities, provided that there is no rain or snow, as the machine does not have waterproof function.
【Warm Tips】① Please note that all these perfect effects are created "In Smoke Environment". Without smoke, just see some pattern effects, and the dynamic beams and scanning effects will not be seen. ② For the best experience, the sound-activated mode should be used together with a loud volume speaker ③Built-in motor spins quickly and may make a sound during working, this is a normal phenomenon.
Characteristic:
Remote Control / AUTO / Sound Activated
Installation of Ceiling
Cooling system in Intelligent temperature control Using in wide range.
Features:
Item Model: DM-RGY200
Light Color: Red, Green,Yellow
Mode Control: Auto, Remote Control,Sound Activated
Power Supply: Output 12V 1.5A AC adapter
Power Supply: input AC110v~AC240v , 50/60Hz
Product size: 280*180*100（mm）
Using for , DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, Family party, Birthday, celebration, Wedding, Festival, Mall, Store, Shop and other appointed place.ect.
Packing&Delivery:
1 Stage lighting×1;
2 Power adapter ×1;
3 User Manual (English)×1
Tip
1,The item model is DM-RGY200, not DMX512
2,More fancy operations need to be controlled by professionals.
Novice players, please follow the instructions to operate.
Larry J.
Reviewed in the United States on March 2, 2022
This device does good, bright RG but if you’re looking for a real YELLOW LASER, keep looking. This should be labeled as RG200. There are only two lasers and one Dichroic mirror. There is Red Laser and Green laser only. It’s the standard Stepper motor drive mirrors scan, which was expected, for the price. Unit is well built, manual with it is for their RGB version, so I’m unsure if their Data for DMX use will function as shown, since only two lasers, it’s for sure the Third laser command won’t function. I got it for case plus parts, so it’s keepable. I am hopeful that True Yellow Laser versions will eventually show up, but this isn’t one. The two lasers in it are in good focus, and they are aligned very good, to same spot. They have adjusted their software to produce a Yellow trace in their display, but unfortunately it’s a mix of the Red and Green together. I haven’t gone further into the case, other than checking with front panel to view Laser setup. Once I get the controller board out, I will update further, on its being a three channel drive or not. It uses the 4 Seven segment LED display and 4 button setup on back. Has the Volume plus Laser power controls. Does come with the basic 3 button IR Remote. One thing that was really nice, it does have Glass window cover for beam out, that keeps out most of the dust etc. that usually plagues most of these displays used in Party Time use. One other note, the steppers are quieter than other displays I have, about the normal on scan speed, and very bright. I have no data about the power level on either laser, but they are nearly as bright on wall as the DMX-RGB400. Power supply is a 12 volt 1.5A Wall Wart. Remote functions are Power, Auto, and Sound. It’s a good starter, for price, and is well built. Only thing missing is a Yellow LASER.
Ronnie Licka
Reviewed in the United States on April 3, 2021
This thing I finally opened up and it’s terrible it shoots out only a faded red light. And you can barely even see it
Fawad
Reviewed in the United States on January 13, 2020
Its the coolest laser light that i have seen so far. The lasers blend so well with my 4 in 1 mixed effect dg lighting. It has plenty of shapes and designs that it produces and responds so well with the music beat. I may end up buying one more light. Love it.
A. Tomczak
Reviewed in the United States on August 24, 2019
EDIT: There would be a video. Amazon is not allowing itLet me tell you a thing or two about this fixture and all it's clonesI've bought 3 of these fixtures. I'm going to buy at least 5 more.Here's why.They are cheapThey are rugged (only one failure on the middle one it was also an rgb. It was the first one I got over 6 months ago. It was on for pretty much 5 months straight. The red diode died. No big deal!)They are easy to understand via DMX.Super easy to control.Honestly, throw out the remote. You won't use it.The sound active mode is super responsive and fast.Tl;dr : Get these. They are amazing.
Sisco Muniz
Reviewed in the United States on May 14, 2019
The media could not be loaded.
Customer
Reviewed in the United States on January 14, 2019
About 15 minutes of laser show with plenty of patterns and motion. The red green and yellow patterns look great on camera with a fog machine. Basically the cheapest motion laser show. The music reaction mode is plenty sensitive and the machine has survived a waist height drop. Excellent value!
Wesley Estes
Reviewed in the United States on September 30, 2018
Unit was acting up upon arrival and wouldn't turn on consistently. The horizontal stepper motor wouldn't align itself right, and the laser output was very very muddy if it came out at all (caused by stepper motor mis-alignment). Diagnosis: the laser and defractor unit had been knocked loose in shipping, after re-aligning it would output correctly whenever the horizontal stepper motor happened to properly align itself. (also remember this was only when the unit actually turned on). If I manually adjusted the stepper motor into position it output fine, although choppy/jittery. I tested the power supply with an voltmeter and determined I was only getting ~5V out of the 12V supply. I have ordered a replacement power supply and suspect that will clear up all the issues. Otherwise this seems to be a solid unit for the price. Will update after I test the new power supply with things.Update: New power supply solved the power on problem. $5, no big deal. The mirror alignment problem persisted but was fixed by tightening a set screw. Unit works fine now.Final assessment: I shouldn't have to do this much repair work to a new product I just paid for. Quality control is obviously lacking, and the parts should be more securely set in place. That said; it wasn't difficult to fix, just irritating. Unit works nicely but the laser movements are more jittery than I wanted. Also the two colors were kinda irritating so I disabled the red one for now and am just using the super bright green one.
Desert Traveler
Reviewed in the United States on November 19, 2018
Worked for 3 gigs so far. Used the canned programs and dead start each time. DMX mode has a lot of control capability. Very bright so be careful and do not shine on people. It is a type IIIb so very bright.
Recommended Products
