Your cart is empty.
Your cart is empty.Product Description
Cybring | Professional Flame Maker
Cybring has been manufacturing and selling soldering and welding torches for more than 10 years.
It’s very important for us to give you access to the best torches that you need in order to complete your projects.
- Own factory to ensure quality.
- Available over 15 countries.
- Deep in gas torch, burner over 10 years.
OXYGEN-MAPP Torch
It is an innovative solution to brazing.
This brazing system use disposable (1.4 oz) oxygen, and 14 oz MAPP cylinder. Making it light weight and compact. You can easily carry it to anywhere you like.
Why Oxygen-MAPP Torch?
Every torch needs Oxygen for the fuel to burn.
In a traditional torch, Air will supply Oxygen.
However, if you need a smaller flame or higher temperature, it will require more Oxygen.
This torch is super ideal for welding, melting, brazing, jewelry work, etc.
- Mobile brazing system design. Light weight, compact. Carry it up a ladder or into an attic easily
- EQUIPPED WITH GAUGES | No extra gauges needed
- HIGH TEMPERATURE| Up to 6432℉ (3000℃)
Soldering/Heat Treating Flame
Welding/Brazing Flame
Cutting Flame
Detail
Oxypropane BRAZING TORCH
This is a professional high heat cutting oxymapp torch, it is fueled by MAPP/MAP PRO/Propane with Oxygen, it can reach a super higher temperature (6432℉/3000℃) compare with the torch fueled without Oxygen. The tank is shown on the picture. The gas valve equip pressure gauge on it, you can working without extra pressure gauge. Since the torch will connect to the gas tank and oxygen tank, the pressure difference between gas tank and oxygen tank will lead to back fire, for this torch, we design a anti-back fire system in the valve, and with the pressure gage on the valve, you can adjust the pressure, both of these make this torch extreme safety. The nozzle is shown on the picture, made by high standard brass, pin point tip flame nozzle, 100% anti-backfire. It has two set of regulators, you can adjust the gas/oxygen near the tank or on the handle. Specification: Material: Brass Temperature: 6432℉ (3000℃) Notice: the tank is not included, and make sure that you choose the right gas tankThe Bushing Type of Gas tank is: CGA 600 RH and the Oxygen tank is CGA 601 LH as shown in the picture. The gas tank is not included Inside the package: Oxygen Mapp Torch X1. Hook x 2.If you'd like the torch with gas cylinder stand rack, you can find in our store. Notice: It may make big noise since the MAPP gas pressure is high, but this is normal.
Oxygen and Fuel Type
Notice, this torch uses a 1.4 oz Oxygen tank, and the bushing type of Oxygen tank is CGA 601 LH. The fuel is 14 oz MAPP which's bushing type is CGA 600 RH. The propane with the same tank is OK, but MAPP is recommended.
NickitOff
Reviewed in the United States on February 25, 2025
When you really need to bring the heat to your jewelry or small metal work, it's a must have. Make sure you use tinted eye protection. It may be small but that flame is super bright!
Mike
Reviewed in the United States on January 23, 2025
fantastic torch for small projects.
Hamid Mahdi
Reviewed in Canada on December 4, 2024
Very good 👍
The Grumpy Texan
Reviewed in the United States on October 18, 2024
I have an OLD (probably 20 years old) version of this that you could buy at the home improvement stores. No gauges so I had no idea if it was working or not, and the age finally got to it (along with the mud daubers.) Spent a few extra bucks and got this one, which turned out to be great. I can see if my bottle is empty (or nearing it) and having adjustment knobs right on the torch makes it so much easier to work with (and not waste so much oxygen especially.) You're lucky to get 15 minutes out of an oxygen bottle for these things so being able to shut it off at the torch helps you salvage a lot of it. I'm doing some refrigeration work and needed a good hot torch, this really does the trick!
Streets Of America Homeless Outreach
Reviewed in the United States on April 23, 2024
I have brazed a lot of copper. Extreme Hot heat is the key to success especially on Air conditioning lines near the valves on the condenser. You Need it done Fast. Excellent in size for brazing also near the evaporator coil in a tight spot. OXY/MAPP and this set up is great. Lines are not color coded to bottles. OXY bottle is RED, Oxygen Line is Blue and MAPP bottle is Yellow, Gas line is RED, So, dont hook up your RED Gas Line up for to your RED Oxygen bottle. First time user on these small setups and I will give it 4 star Rating not 5 because of Line Coloring
Arnie Lepisto
Reviewed in the United States on September 8, 2023
So far it is working fine. I haven't used it with to valves completely on to generate the heat needed, this saves on fuel consumption. Some other reviews I've read there was complaints of high fuel consumption.
blake asleson
Reviewed in the United States on August 17, 2023
I was impressed with the quality. Works well and is pretty durable.
Mike Brittain
Reviewed in the United States on December 1, 2023
Love this product especially with the built in gauges but as with every single type of welding or torch product I've gotten from Amazon it has and does have multiple points that leak and could be a potential safety hazard for an inexperienced user so I ended up having to take it apart and properly seal all of the threads which was never done when originally assembled quality control and safety testing is a must for supplier and purchasers
chris
Reviewed in Canada on August 26, 2022
i dislike that this thing is completely unsafe and should be taken off the shelves and anyone who has purchased one shoupd get there money refunded, or you can role the dice and wait for a lawsuit
Bertrand B.
Reviewed in Canada on December 5, 2022
Like it a lot work good 👍
Tim m.
Reviewed in Canada on November 5, 2022
No oxygen would come out despite pressure. Discovered check ball behind the hose on the regulator was jammed. Freed that and works great. Oxygen only lasts 15 min give or take and at $20 a pop is not worth it. If you could only get the tanks filled for $5 it would be ok. Or maybe I have a new project? I would have left a video but don't want to waste precious oxygen.
D.T.
Reviewed in Canada on May 16, 2021
Best mini torch set I’ve used.
michael kirby
Reviewed in the United States on April 23, 2021
Works good. Make sure you get a stabilizer to secure canister because the weight of this will keep knocking canisters over. I really do like this and would definitely recommend
Recommended Products
$45.00
$ 21 .99 $21.99