Your cart is empty.
Your cart is empty.Upgrade your vehicle’s performance with the Pertronix Electronic Ignition Kit, the ultimate solution for replacing outdated mechanical points. Designed for a seamless fit into your existing distributor, this ignition kit enhances your engine's efficiency without the need for an additional ignition box, preserving the classic appearance under the hood. This innovative kit doubles the voltage delivered to your spark plugs, increasing horsepower, improving fuel economy, and extending spark plug life. Its advanced technology uses rotating cobalt magnets paired with a Hall Effect integrated circuit, ensuring precise timing without the wear and tear of moving parts. The robust, maintenance-free design is epoxy molded, making it impervious to dirt, oil, grease, and moisture. Ideal for a wide range of applications including automotive, marine, industrial, and agriculture, the Pertronix Ignitor is easy to install and offers stable, reliable performance with no adjustments necessary.
james r anderson
Reviewed in the United States on June 19, 2024
Easy to install and my tractor runs great
Rick m.
Reviewed in the United States on May 25, 2024
It works great and easy to install.
David Green
Reviewed in the United States on November 12, 2024
Fits perfectly and works great
Eric handy
Reviewed in the United States on March 29, 2023
I had to purchase this product 2 time's with in 45 days . And Now i have to buy it for a 3rd time . This is all with in 45 days .I bought this product , installed it , worked good for only 1 week then it quit firing again. I use the tractor every day with the work I do , that being said no tractor no work.. so to get it up and going again,, I decided to order another one so it would be on the way while the other one was being sent back for refund. Thought i was on top of things by doing it that way since i got to have it for the tractor so I can work .Got the 2nd one in the mail. Installed it . It worked for 36 days and can't return . Only 6 days past the 30 day return policy. Now I have to order this item again for the 3rd time with in 45 days.Yes I'm very unhappy with the product ,Completely Unsatisfied with this product failure
Andre Ratte
Reviewed in Canada on January 4, 2023
Performance améliorée plus de hp avec mon super M
taz
Reviewed in the United States on March 17, 2022
We were having issues with our old C. Decided to try this little module out. What the hay it was a reasonable price.Took less than 30 minutes to install and set up. Definetly had to advance the timing a little to smooth it out. The dust plate does not fit after installing the magnet, but that was a minor issue. I may clear out the center hole of the cover to get it to fit later, but it was not needed. My cap seats right in place with no interference. I had already gapped the new spark plugs wider to get a hotter spark so that wasn't a step I had to take. Turned on the power and she jumped to life right away. Made some minor adjustments to the idle and mix on the carb and she runs like a new tractor again. I just hope it holds up.
Mike T
Reviewed in the United States on January 20, 2022
I installed the PerTronix 1442 on my Farmall Super H with original IH distributor #353898R2. Was Very easy to install, though I wanted to reuse the original dust cover, so I needed to remove some material between the rotor and the exciter ring, so they didn't rub. Also, after installing I checked the timing, and it was off about 20 degrees. Should be ATC or 0 degrees at warm idle. I adjusted that, and finetuned the highspeed jet on the carburetor, about 1/2 turn out from where it was and now runs so! good. Lots of torque. Doesn't stumble at all. You would never know this was a 1954 model!
Sean V
Reviewed in Canada on August 10, 2021
My Farmall H wouldn't start one day. Tried to easily source a condenser and points with no luck. Bought this and followed the instructions. No more condenser or points and it has never started so well. Couple things, look at getting new plugs (with .005 bigger gap), wires and the recommended thunder coil. Took longer to remove the old parts then it took to install the new kit.
Richard
Reviewed in Canada on June 29, 2020
Very good product. Easy to install in my 1952 Farmall Super A. Works awesome.
Sam
Reviewed in Canada on August 23, 2019
The old farmall has never run better. no points to mess with. no wondering if a gear tooth is off. no dropping that little screw and trying to find it. no trying to slide a feeler gauge and wondering if that is the correct amount of tension. been 8 months and it is running great
JBM
Reviewed in the United States on April 9, 2019
When buying my IH184 I knew that those old motors were always temperamental when starting and usually very cold blooded. This tractor didn't vary....it was difficult starting - always having to diddle with it just the right way to get it to pop. Then came the day that it wouldn't start at all, and decided I was done messing with the points and decided to upgrade to the Pertronix electronic ignition (I took their recommendation and bought the flamethrower coil as well). First off, while I'm a seasoned mechanic, anyone with even rudimentary mechanical skills would find installing this kit extremely easy. Most importantly, once I had it installed and went to try to start it, it started immediately upon turning the key!!!!!!! It starts right off the bat every time and seems like it runs smoother and has more power than before!!!! I highly recommend this product!!!!!!!
Customer
Reviewed in Canada on February 18, 2018
No issues with packaging or delivery. Super easy install no issues
JZ
Reviewed in the United States on May 2, 2012
I installed this in a Farmall 300 to replace the points/condenser. Very easy to install... Pertronix provided everything. The distributor used on this Farmall 300 did require some slight modification to get this kit installed... I had to make a 1" dia. counterbore on the back side of the plastic spark plate (plate under the rotor) about 1/16" deep and had to file off about 1/16" from the end of the magnet cap included with the Pertronix kit. When I first installed the magnet cap over the rotor post, it was too tall and the distributor cap could not be installed. These modifications allowed it to install properly. Otherwise, the mounting plate just dropped right. Once installed, I saw immediate improvement in starting and running performance--I had been having trouble with it missing when cold and under load... no longer an issue! I'm a VERY HAPPY customer and plan to order a kit for my other two tractors as well.
Recommended Products
$145.24
$ 67 .99 $67.99