Your cart is empty.
Your cart is empty.Product Description
Pedal Commander for Jeep Grand Cherokee L WL (2021 and Newer) - Throttle Response Controller
Say goodbye to laggy throttle delay in your Jeep Grand Cherokee L. Forever.
Have you noticed that older vehicles were more responsive and quicker to take off? That’s because vehicles were operated with mechanical throttle cables back in the day, which means everything happened instantaneously. Today’s newer vehicles, such as the Grand Cherokee Ls, lack the response that came with throttle cables. Because they are now controlled by Grand Cherokee L’s computer, it doesn’t matter how fast you push your gas pedal to the floor, you don’t have access to all the power and responsiveness your Grand Cherokee L has to offer. Pedal Commander is the solution.
Pedal Commander is the world’s most advanced throttle controller. It allows your Grand Cherokee L's engine to respond faster and gives you the acceleration you want when you want it! By amplifying and speeding up the signal sent from the sensor on your gas pedal to the Grand Cherokee L's ECU (computer), our throttle response controller removes response delays on any vehicle with an electronic gas pedal.
Pedal Commander is one of the most in-demand Jeep Grand Cherokee L accessories on the market. Live Life Full Throttle and fall in love with your Jeep Grand Cherokee L all over again!
it is compatible with
Jeep Grand Cherokee L 3.6L V6 5.7L V8 engines
Why Do You Need the Pedal Commander on your Jeep Grand Cherokee L?
The Pedal Commander will give you the instantaneous throttle response that is missing in the Jeep Grand Cherokee L.
With the Pedal Commander, you can finally experience 100% of what your vehicle has to offer. Take your vehicle’s performance back into your hands and drive the way YOU want.
Maximize your driving experience
Pedal Commander is completely compatible with any other aftermarket parts you may already have. And since we don’t use the OBDII port, this means it’s a perfect match to compliment your existing tune or programmer to fully customize your Jeep Grand Cherokee L driving experience.
Control Pedal Commander on your phone
In case your Pedal Commander unit is out of reach and hidden somewhere underneath your dash, we've made it accessible to control the unit right through your phone with our app for iOS (10.0 +) and Android (5.0+).
FEATURES
- The Pedal Commander significantly improves throttle response, reducing lag when accelerating
- Customize and switch between driving modes for spirited driving, fuel efficiency, or daily commuting
- The Pedal Commander is explicitly designed for your Grand Cherokee L`s model and year
- Easy Installation, user-friendly setup
- Bluetooth enabled, mobile app control
4 modes 36 Driving Options
Eco Mode
ECO Mode allows you to maximize your vehicle's fuel economy by up to 20% over the stock ratings. Its slower response also allows for better traction over terrains like snow, rain, mud, dirt, etc.
City Mode
Customer favorite, City Mode, gives your Grand Cherokee L the response of an "old school" throttle cable, with a 1:1 pedal-to-throttle ratio. This mode is popular among daily drivers as it gives your Jeep Grand Cherokee L a perfect balance of performance and practicality.
Sport Mode
Sport Mode is a favorite amongst spirited drivers looking to get-up-and-go. This mode allows for a significantly increased throttle response, and is not for the light-hearted. If you're looking to make your Ridgeline daily commute more exciting, use Sport Mode.
Sport+ Mode
Sport+ Mode is the most extreme mode we have to offer. Its extreme high performance response allows your Jeep Grand Cherokee L to accelerate like a race car. This mode should be used with caution!
Space Saving Design
Plug And Play
Easy plug-and-play method for hassle-free installation. Installing the Pedal Commander takes only 10 minutes.
- Pedal Commander will not leave "flags" on the ECU
Pedal Commander works harmoniously with Jeep Grand Cherokee L
Unleash Your Grand Cherokee L's Potential with Pedal Commander
Pedal Commander is easy to install and has a plug-and-play setup. Enjoy optimized performance through vehicle-specific programming tailored to your Grand Cherokee L.
- Pedal Commander enhances your driving experience by allowing quicker access to your engine's existing horsepower with an amplified signal.
- Pedal Commander throttle controller complements any other mods and upgrades like tuners, programmers, performance chips, cold air intakes, performance filters, or aftermarket add-ons.
- We only intercept the electronic signal and uniquely remap the throttle curve, so its beauty lies in its simplicity.
- Discover a new level of driving pleasure with expertly-crafted custom throttle maps that deliver lightning-fast precision and optimal performance.
Made for performance enthusiasts
Unleash the Power: Pedal Commander, Backed by Renowned Industry Experts, Elevates Your Driving Experience
Backed by the Professionals: Pedal Commander, The Advanced Throttle Controller Pedal Commander is the preferred Jeep Grand Cherokee L upgrade on the market, offering instant throttle feedback following an easy 10-minute installation. It does not interfere with the OBD II port, enabling simultaneous use with other upgrades like a performance chip or an ECU tuner. Backed by automotive professionals, Pedal Commander is a trusted throttle response controller. More than 10,000 positive reviews online from enthusiasts worldwide prove that we are dedicated to creating a throttle response controller that is simple and effective over all other mods. Equipped with vehicle-specific maps, four driving modes, and 36 individual increments to choose from, Pedal Commander is an advanced programmer for your vehicle’s accelerator pedal. If you’re looking for accessories that boost your daily driving performance or smoothen it out for long journeys, Pedal Commander has you covered.
Jeep Grand Cherokee L Performance
What`s in the box?
- Pedal Commander for Jeep Grand Cherokee L 2021 and Newer
- Harness with OEM plug
- Wet wipe (use gently)
- Zip ties
- User manual
INSTALLATION
1. Turn off Ignition.
2. Keep your key fob (if applicable) at least 35 ft. (10m) away from your Jeep Grand Cherokee L. This prevents your car from using power to transmit signals to your proximity key fob sensor.
3. Leave your driver’s door open for 15 minutes to allow your ECU to shut down completely.
4. Locate and disconnect your accelerator pedal assembly plug.
5. Plug in your Pedal Commander in line with your accelerator pedal assembly plug until you hear a “click.”
6. Make sure the cables are tucked in place so they do not interfere with your driving experience.
7. Place and mount the Pedal Commander to your desired location using the velcro and mounting bracket that's included in the box.
IMPORTANT
To avoid receiving check engine lights or other issues, it is important that you follow these instructions properly. Also, please ensure that you hear a “click” sound while connecting the plugs, as this signifies a secure connection.
Garrett Jones
Reviewed in the United States on July 7, 2024
Definitely increases the acceleration speed
Recommended Products