Your cart is empty.
Your cart is empty.Product Description
PB Motor Tech VACUUM CHAMBER KIT WITH PUMP
Vacuum Chamber Kit with Tempered Glass Lid
PB Motor Tech vacuum chamber kit can be perfectly equipped with single or dual stage 3 to 9 CFM pumps. It is suitable for silicone degassing, lab experiments, chemical industry, especially perfect for stabilizing wood and experiments with volitile compounds, etc.
4.5CFM vacuum pump
Specification:
- Model: RS-1.5
- Voltage: 110V/60HZ
- Free Air Displacement (FAD): 4CFM
- Ultimate Vacuum: 5Pa
- Power: 1/3HP
- Oil Capacity: 225ml
4.5CFM 1/3HP Single-Stage Rotary Vane AC Vacuum Pump
Features:
High efficiency & Low noise
Easy start-up & High volume cooling fan
Humanized external design & Portable valve design
About the oil leakage issue, because every vacuum pump is tested and operated with oil before shipment, after that, the oil will be poured out, but there may be a little rested in the pump, which may cause oil leakage during the long transportation. If you find the oil leakage on the surface when receiving the product, just wipe it and then use.
Vacuum Pump Features
1. Built-in Fan:
It is designed for quick heat dissipation and safe operation.
2. Transparent Sight Glass Window
You can observe the oil level and quality timely.
3. Upgraded Exhaust Filter
The new-design exhaust filter with filter cotton can filter out smokes and reduce noise effectively.
3 Gallon vacuum chamber with tempered glass lid
Perfect for wood stabilization, resin casting, degassing essential oils
- This vacuum chamber with tempered glass lid is specially designed for stabilizing wood, because wood stabilizing resins and volitile compounds are highly corrosive to polycarbonate and acrylic. Thus the acrylic crystal lid may crack soon in the wood stabilizing operation.
- In order to achieve better sealing, the new batches of vacuum chamber are provided with two rubber seals, if the item you received does not have two rubber seals, please send email to the seller for help.
Package List
- 1* vacuum chamber
- 1* pressure gauge
- 1* PVC hose
- 1* non-slip mat
- 1* small accessories box
Specifications
- Chamber Dimension: 9.84"*9.84" (Without Lid)
- Volume: 3 Gallon
- Lid Diameter: 11.02"/28cm
- Thickness of the Lid: 3/5"
Vacuum Chamber Features
- The tempered glass lid is impact-resistant, which is perfet for wood stabilization. And its excellent transparent and large window provides enough visibility for work.
- The vacuum chamber is provided with two rubber seals, one is on the lid, the other is on the chamber edge, which is perfect for better sealing when vacuuming.
dalton
Reviewed in the United States on February 1, 2025
Works as it should great product
n
Reviewed in Canada on January 8, 2025
This works pretty well. The instructions are garbage, written by somebody who's never seen this machine before, but youtube fills that in. It only goes to -27, not -30, but it gets my bubbles out, so that's okay
Alina
Reviewed in the United States on August 26, 2024
The pump burned out our socket after the second use. The pump generated tons of oil vapors and gets extremely hot in 30 seconds. After second use doesn't work at all burning any extention cable. Low quality product. More over that you need to pay for the return of 11kg machine by yourself!! That is fully unacceptable work from Amazon and from this seller.
Miked9746
Reviewed in the United States on August 12, 2024
As others have mentioned, the included instructions are pretty much useless and/or incorrect.It did come with sufficient parts/tools, but the wrench that's punched from a piece of metal is too big for the valve that installed on the pump itself, and too small for the 1/2”~1/4” adapter that is also included (there's only 2 hex shaped parts in the whole kit, besides the lid nut!). No doubt most people will have an adjustable wrench in their home, so it's not a huge issue. One of the silicone washers included with my kit was already broken. Unfortunately, that means the entire thing is useless until I can get a replacement. The parts list claims that it comes with a 4.9ft hose, but in actuality the included hose was only 3.25ft (attached photo). Luckily, a 3.25ft hose is sufficient for operating the equipment.The instructions also claim that you need to use the included hex wrench to install/remove the oil drain plug, but the oil drain plug on the pump is just a Phillips head screw (attached photo)! 😖😖 Bottom line.... these kits aren't exactly made for precision and/or laboratory type work, so keep your expectations tempered. I can't comment on it's functionality until I find a replacement silicone washer, but it seems like it should work just fine once that issue is resolved.
Aldo De los Santos
Reviewed in the United States on August 1, 2024
So far I'm about 1 month into using this Vacuum chamber, and so far it was been perfect for my needs. I'd say I degassed about 10 pints of silicone so far without any issues. The pump itself isn't loud for the time it takes to reach max pressure. Vacuum holds for after the pump is shut off. I definitely would recommend this to anyone starting out.
Jose Spindola Lopez
Reviewed in Mexico on July 15, 2024
Muy buena calidad.
roadkingmoj
Reviewed in the United States on May 9, 2024
Worked well degassing 64oz resin. Held vacuum with no leak down.
kevin france
Reviewed in the United States on May 8, 2024
spits oil everywhere. pump motor gets hot relatively quick. didnt come with any oil like it says it does.
John
Reviewed in Canada on December 3, 2024
Great Vacuum Chamber Kit. I am using it as a vacuum chamber to seal my mason jars, works amazingly well, great product, thanx.
francis gram
Reviewed in Canada on December 24, 2024
Some washers were broken - seems rather common. Instructions should be clearer but rather easy to put together. ADD THAT OIL - it is needed. Works just fine, even better and faster than i thought.
Bob
Reviewed in Canada on December 18, 2024
It's not huge the chamber but using a sort of rack to place and remove the resin molds (like kilns use) I was able to easily degas a larger piece.Top lid is super thick to prevent cave in under pressure and the pump didn't have any trouble with this size chamber. Honestly not bad as it is half the price of some other models.Note you need to add your own oil (dont overfill!) Before using the pump dont forget!Also while I was assembling the hoses I also oiled all the o-rings to keep them fresh, but they seem ok on this review unit and kept the seal.
Customer
Reviewed in the United States on October 20, 2024
couldn't be happier, this works just as expected
skitlbug
Reviewed in the United States on April 10, 2024
The media could not be loaded.
Recommended Products