Your cart is empty.
Your cart is empty.
KIND REMINDER BEFORE PURCHASE:
Fit for the following Nutri Ninja blenders: Nutri Ninja Kitchen Systems Auto-iQ Blenders, Compatible with Nutri Ninja Auto IQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL482-70, BL486CO, BL487, BL487A, BL488W, BL450, BL451-70, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
DO NOT FIT Magic Bullet or Nutri Bullet or Nutri Ninja Professional Blender BL660 BL770 BL771 BL772 BL773CO and BL780
TIPS FOR USAGE1. You are recommended to replace your ninja blender replacement parts every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill to avoid spilling, do not add ingredients past the "Max" line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Donna P
Reviewed in the United States on February 24, 2025
Still using blender daily. Occasionally need a replacement part, but my husband uses it every single day at least once.
Debra R.
Reviewed in the United States on February 24, 2025
Haven’t had the product long but it seems to work perfectly for our Ninja
Darryl Saunders
Reviewed in the United States on February 23, 2025
I was pleased they included multiple adapters to fit my unit.Very 😊
Sandra McAfee
Reviewed in Canada on February 21, 2025
These replacement extractor blades fit my ninja blender perfectly! They work just like the original—sharp, durable, and efficient at blending smoothies, soups, and more. The seal is tight, preventing leaks, and the blades cut through fruits and ice with ease. Great value for a 2-pack and they’ve brought new life to my blender. Much cheaper than buying a new blender. Highly recommend!
Cliff Clark
Reviewed in the United States on February 20, 2025
Great replacement items
LeRoy Welch
Reviewed in the United States on February 17, 2025
Perfect replacement. 2nd time buying. They last for about 2.5-3 years before the bearings go. Good value for the price
Ron Caldwell
Reviewed in the United States on January 16, 2025
Too early to tell on the quality.
Dood
Reviewed in Canada on May 16, 2024
We noticed the noise compared to the oem on the first use. It definitely sounds louder than the original. Don't get me wrong... they are both loud... it IS a blender after all. The concerning part is that after only 3 months use we noticed that there are radial cracks in the base which will definitely eventually cause a leak, or worse, a catastrophic failure where the bearing and blade break loose while in use causing several ounces of rapidly rotating steel to rattle around inside the plastic tumbler. After the tumbler breaks there is no telling where those rapidly spinning steel blades, sharp broken plastic and the remnant of your morning smoothie will go....hopefully not into someone or something of consequence. If it happens first thing at groggy o'clock in the morning I can assure you that you won't need a cup of coffee to wake you up, but you probably will need to change your underwear.
klau
Reviewed in Australia on December 4, 2024
They fit well and work with our existing Ninja.
C.Antonia
Reviewed in the United States on December 23, 2024
These impeller cogs are made of rubber that is too soft to handle the torque of the motor. The cog pictured on the left is the MEET JUICE replacement impeller cog that stripped after only 9 days and 9 smoothies! The cog on the right is the original Ninja impeller which is over 5 years old! You can see the difference in the cog tooth heights (leftmost picture), how badly the soft rubber cog teeth of the MEET JUICE part shredded away (middle picture), and how well the original Ninja impeller has kept it's shape and height, after 5 years and probably more than 2,500 smoothies.I only replaced the original because the seals finally gave out and it was leaking. I grind hard materials in my smoothies. I use milk or almond milk, yogurt, cottage cheese, fruit of some type, raw egg, whey or collagen powder, avocado, and water.LOOK AT THE PICTURES, DON'T WASTE YOUR MONEY ON THESE PARTS!!
Tammy A
Reviewed in the United States on November 4, 2024
These blade replacements start cracking, radiating out from the blade assembly. I'm on my fourth unit. I use mine daily. They last about 6 months. That's about 150-180 cycles of usage. Liquids leak through the cracks onto the blender base.
Francis S Heng
Reviewed in Singapore on April 11, 2024
I waited after a week of using it to do a review. It meet my expectations and performed just like the original. Fits perfectly with no issues. A good offer should you need a replacement. It came neatly packed with all the items pictured in their advert.
Mike
Reviewed in Mexico on September 16, 2023
Muy buena calidad, ensamble perfecto..
Recommended Products
$22.99
$ 10 .99 $10.99