Your cart is empty.
Your cart is empty. Compatible for Bamboo Labs P1,P1P,P1S 3D printer.
Package：
Assembled hotend(with 0.4mm nozzle) x1
Additional hardened steel nozzle: 0.2mm x1,0.6mm x1,0.8mm x1
Thermistor x1
Ceramic heater x1
Silicone sock x1
Titanium screws x2
Set screws x2
Thermal grease x1
1.5mm Wrech x1
4mm Wrech x1
Hex key x1
Restaining clip x1
Please note：
(1) Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
(2) Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
(3)For general carbon fiber or glass fiber filaments such as Bambu PAHT-CF and PET-CF, it is recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
john talbert Rea
Reviewed in the United States on February 9, 2025
fit well in my bambu P1s and worked without issue.
M D.
Reviewed in the United Kingdom on February 27, 2025
I loved the concept of this, making swapping nozzles on the p1s faster and easier.Overall it is OK however it needs a lot of flushing between filament changes. It also seems to leave lots of little blobs of filament on the bed and over the print. They wipe of easy enough but obviously it must be an issue. Still no idea if or where I can get replacement nozzles for it.Update. I have gone back to original Bambu hotends as I was getting too many issues with this one. Many flaws in prints, shining occurring between layers and lots of colour contamination between colour changes.
Linda Reed
Reviewed in the United States on February 22, 2025
I’ve been using this quick swap nozzle for about a week non stop on my p1s Combo. I have to say I’m really satisfied with how the quality of this product works and how easy it is to swap nozzle sizes. Here are some pros and cons of the overall horned and nozzles.Pros;• Great packaging and fast shipment.• Quick nozzle swaps.• Easy installation.Price;The price of this kit is a lot cheaper than if you would buy all these nozzles and hotends from Bambu lab.Cons;• the wrench that comes with the product that’s used to switch out the nozzle sizes wears out over time.So overall, this product was a great help. I would definitely buy this again and say it’s well worth the price. Don’t forget to heat the nozzle to 200 Celsius and tighten when changing nozzle sizes to prevent material leakage. Hope this helps :)
Timothy
Reviewed in the United States on February 19, 2025
I needed a hot end in a pinch. Bambu Labs had over a month wait, so I took a chance on these. Well, it worked okay for about 100 print hours, but then it seemed to keep getting clogged over and over. I think it's just not very precise. You can see from the pattern of the machining that it's just not the same level of tolerances as the Bambu Labs OEM hot ends. It has rough edges where it makes contact with the heating element and just "looks" low quality. It works in a pinch though. I did get about 100 hours out of it. But that's not exactly great.
Jesse Ellis
Reviewed in the United States on February 18, 2025
This prints as well as a stock hotend, although I have not done a flow test yet. Swapping the nozzles is relatively easy. My complaints are that a screw had not been installed, and there are no instructions. You need to remove the throat and put some thermal paste on it and reassemble everything. Not sure how the average person, who doesn’t have experience building hotends, would know that. Even just a little note to remind them would be good. You risk having thermal creep and getting a bad reputation for your hotend. All in all, I’m happy with the purchase and have enjoyed trying the different nozzles.
James
Reviewed in the United States on February 16, 2025
Seems to work fine, but print quality is suffering. Since installation, I've had to print everything at 50% speed to make it even look decent. Will probably go back to only using bambu lab official parts. Not bad for a cheap replacement.
Matt N
Reviewed in the United States on February 13, 2025
Worked great for me. Printing is fantastic and no issues so far. As of right now I definitely recommend. I’ll update if anything changes.
Customer
Reviewed in the United States on December 27, 2024
Great value overall. It printed well right after install. Haven't had an issue yet. Don't forget to tighten the nozzle while it's hot before you start your first print.
Marshall R.
Reviewed in the United States on December 25, 2024
Went right into P1S and is running great for 2 days so far. No other calibrations needed except for the auto bed leveling. Hopefully the hot end lasts and nozzle changes are easier for a long time.
Recommended Products
