Your cart is empty.
Your cart is empty.Product Description
Our 2 piece Box and Finger Joint Set is perfect for woodworker’s who want to make precision box joints at an affordable price. The high tooth count saws produce smooth, square notches and fingers in the two most popular sizes, 1/4-Inch and 3/8-Inch. The precision ground C-4 micro grain tungsten carbide tips stay sharp longer and cut through all types of hardwood and softwood with the greatest of ease. Each set also includes detailed setup instructions and is packaged in a full color storage case. Cuts perfectly square fingers and flat bottom notches every time. Easily change from a 1/4-Inch to a 3/8-Inch cut by reversing the inner and outer blades.
From the Manufacturer
Our 2 piece Box and Finger Joint Set is perfect for woodworker’s who want to make precision box joints at an affordable price. The high tooth count saws produce smooth, square notches and fingers in the two most popular sizes, 1/4-inch and 3/8-inch. The precision ground C-4 micro grain tungsten carbide tips stay sharp longer and cut through all types of hardwood and softwood with the greatest of ease. Each set also includes detailed setup instructions and is packaged in a full color storage case. Cuts perfectly square fingers and flat bottom notches every time. Easily change from a 1/4-inch to a 3/8-inch cut by reversing the inner and outer blades.
Dirk Anacker
Reviewed in Germany on February 7, 2025
Wow das hatte ich nicht erwartet. In meine Dewalt eingebaut und durch die mitgelieferten Ausgleichsstücke perfekte Nuten geschnitten. Direkt am Stück 20 mal 2.5m .Hat einwandfrei funktioniert.
DavidS
Reviewed in Spain on June 25, 2024
No he probado ni otras marcas, ni en otras sierra. Tengo la sierra de mesa venir y me ha funcionado de maravilla. No puedo sacarle todo el rendimiento porque el eje no me permite más de 10 mm, pero me ha gustado como trabaja. Hay que ir más lento que con un corte normal, pero es de esperar ya que tiene que quitar más material. Por lo demás, estoy muy contento con el set, y sé que me va a durar mucho tiempo
José M.
Reviewed in Mexico on February 5, 2024
Muy recomendable y muy barato..lo mejor!!
wRONgGuy
Reviewed in the United States on April 18, 2024
This dado stack is a great buy. As you can see in the photos, it leaves a flat bottom with no ridges. Also as you can see, there is no tearour. In almost 8 feet, across the grain, in plywood, there is no tearour. Even the exit end has nice square cuts. I originally purchased the FoxBC 8" but it has a lot of tearour and ridges on the bottom, so I sent it back and ordered this one. This one is a little more expensive, but more than worth the extra $20.
Jazzer
Reviewed in Canada on January 9, 2023
My DeWalt DWE7485 does not have long enough arbor to accept dado blades and this is a major downside of this otherwise great table saw. I've searched long enough for alternative blades that have thinker kerf and flat top. There aren't many to begin with and most are expensive. Look no further. These blades are the perfect affordable solution. I only used once so far but I'm very pleased with the cuts.
Heitor Jr.
Reviewed in Brazil on December 22, 2022
Pelo valor da mercadoria, merecia uma embalagem melhor, as lâminas intermediárias vieram umas sobre as outras, dependendo do cuidado(falta dele) no transporte, pode acarretar em quebra dos dentes por atrito.Aconselho uma nova embalagem. O meu chegou bem, nenhuma avaria aparente. Resta agora testar para ver se tudo cabe na DW7492.
Jeffery C. Hickman
Reviewed in the United States on September 12, 2013
Product was shipped and delivered promptly after order was placed.The blade set I received was in the aluminum case with heavy foam support around perimeter and foam sheets in between all blades. I am a weekend hobby woodworker and never used dado blades before the purchase. These work great for me! All the blades and shims in my set came clearly marked and I found it easy to make slight adjustments and dial in the exact width of cut I needed. I have a 15+ yr old JET JWTS series contractor saw and the blades and shims went on and off my factory 5/8" arbor with no problems. I will say that the shims can be a little tricky as they tend to find their way down into the arbor threads so be careful with that. All the blade teeth were complete and sharp (no nicks or quality issues as some other reviewers have cited). I have used once so far making many dado slots in MDF. The cuts were clean with a smooth, flat bottom. As the manufacturer clearly explains in the included literature the outer blade teeth are angled and slightly deeper intentionally to cut a crisp clean edge and bottom with minimal tearout. The minimal bottom corner groove produced by the outer blade teeth is barely noticeable and not a concern for me. Another positive for me was the full chipper blade design. I was down to this set or the similarly priced set from Freud. I had read a few reviews that indicated the partial chipper blades in the Fred set were not so easy to align and hold in place when installing on the arbor. That was a key factor in my choice of the Oshlun set. I have to say that even with the full chipper blades, aligning multiple blades for wider cuts can be tedious, especially if you need to use a few shims. I am very glad I went with the Oshlun in that regard because I understand now how much more difficult it would likely be with partial blades.Overall I am 100% happy with my purchase and I highly recommend to anyone considering.
Smoke
Reviewed in the United States on February 3, 2012
Never using a stacked dado set before, I relied mostly on the reviews of the people here on Amazon (as I do for most of my purchases). Professional reviews from magazines or websites are nice, but I find that it's better to hear the feedback from actual Average Joe users. That said, it was a difficult decision choosing between the Oshlun and Freud sets, but after reading the reviews, I decided to spend a little less and go for the Oshlun set.A big thing I keep reading in the reviews is how people feel the supplied box is just god awful and deduct a point or two for it. First off, I didn't spend $65 (6-inch set) for a cardboard box, I spent that much on the product inside. With that being said, and considering what people were saying about the box, I was really expecting something with a thickness less than a cereal box to be what held the dado set, but to my surprise, the box is actually very sturdy. It's also really nice that individual styrofoam cutouts were made to separate the saw blades so that they don't contact each other and chip the carbide tips. I plan on using the box as a long term storage piece for the time being until a time comes when I may need to build a wooden case for the set, but even then I'll use the original foam inserts for extra protection.Aside from that, the blades cut a very smooth and flat bottom with very little chipout on the ends. The scoring was a little bit deeper than I had thought it would be initially, but it's not enough for me to worry about or deduct stars for. It hasn't done anything to lessen the quality of glue ups in my cuts, but if it had there's still 220 grit sandpaper to smooth it out in a few strokes.Overall I am very pleased with this set. I've found it incredibly easy to change the setup and the included chart for sizes is really nice as well. I have no regrets about the purchase.
Recommended Products
$16.95
$ 6 .99 $6.99
$84.98
$ 38 .99 $38.99