Your cart is empty.
Your cart is empty.Product Description
Products of ORX PLUS TOOLS are original design with multinational patents. Also, product quality is always our top priority.
ORX PLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM
- Easy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.
- Cost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.
- Safety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.
- Using proper speeds and feeds-Drill use 0-400 RPMs. Fit 1/8' (3mm) to 3/4' (19mm)
- Widely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic
HOW TO USE&STEPS
1. DRILL MODEL
Don't use impact/hammer driver. Please use drill driver to deburring/chamfering.
2.FIXED WORKPIECE
To make sure perfect deburring, please fix the workpiece tight.
3.SPRAY OIL
Hard steel could use lubricating oil to improve tool performance
4.DEBURRING/CHAMFERING
In a clockwise direction only. Slightly applying pressure to remove the burr.
3MM-19MM
- Quick chuck
- 3 HSS blades
- RPM: 0-400
15MM-36MM
- Hex Shank
- 5 Tungsten blades
- RPM: 0-150
34MM-54MM
- Hex Shank
- 9 Tungsten blades
- RPM: 0-150
Mario
Reviewed in Mexico on February 9, 2025
No duró ni 2 usadas. Se despega la cabeza del perno que se mete en el taladro.
Excellent
Reviewed in Saudi Arabia on February 17, 2025
Received goods as described, very fast shipping and a well packed shipment
Get some
Reviewed in the United States on February 16, 2025
What a surprise to use a cheap tool that actually works. Cuts like a hot knife through butter. Nuts thread on perfectly. Used on m6 and m10 bolts.
Ryan carpenter
Reviewed in the United Kingdom on February 14, 2025
Really happy with this. Many years as a builder struggling to get a treaded rod clean after cutting to length this eliminates all the stress and saves you time. Not 100% how long it will last but already saved me many ours work so it’s paid for itself. 10/10
Abdulla S.
Reviewed in the United Arab Emirates on August 26, 2024
Works well thanks
Nicolai Reidovitch
Reviewed in the United States on July 10, 2024
It worked very well for about 30 or so uses. The chuck snapped and now it is useless. If you do purchase this I'd advise against putting it in your impact. Use a drill instead. Not impressed with the quality *update * seller contacted me and replaced item for free. I appreciate this level of customer service
jim chemsak
Reviewed in the United States on June 1, 2024
Great tool for tapering the ends of all thread rod, bolts, solid rod, steel & copper pipe (aluminum pipe is tricky). As others have said, DO NOT USE AN IMPACT DRILL!!! A small hand held battery drill is best, start at low speed and press lightly until desired taper is achieved. Hit it straight on, do not walk it around in a circle. If there is a burr on the work piece, say a cut off tip, grind or file it off first. This will keep the tool from giving you an off-center taper. I’ve used mine a dozen times w/o problem, still sharp.
spudly
Reviewed in the United States on February 24, 2024
I had to cut down the studs on my rear axle as the ARP ones were too long to use with closed lugs nuts. The was able to go through all ten studs and chamfer down the sawed off end on all ten studs. I used a regular cordless drill set to the lower speed setting (1 instead of 2 for my older Dewalt) and the tool worked its magic on the ends.I'm not sure how many more studs it would have in it, but I know that it went through ten hardened studs with great results and still has material left in it for more work down the road. It's in my drill bit drawer now for use on the next round of all-thread, studs, or bolts I need to chop down and chamfer.The pictures show the first stud and the last stud I used this on as well as what the starting point was for each stud.
RCOR
Reviewed in the United States on March 18, 2023
After reviewing many others, I decided to buy this ORX Plus Tools Deburring Drill Bit for bolt sizes 1/8"-3/4".It has saved me a lot of time on projects, maintenance and repairs. I mainly use it on threaded bolts. It's easy to use. It a quick attachment. The price is a little high but worth it. It's been nine months and it still works like new. I use a little bit of oil every now and then, just like with my regular drill bits. I have used it over forty times and always gets the job done nicely.
Phil
Reviewed in Canada on May 2, 2021
Thanks!
Jordan
Reviewed in the United States on March 14, 2021
The de-burring cup is an actual 3 point cutting tool that utilizes HSS to shave the end of bolts, bar stock, etc... so, if you come at it cranked up to 11 and expect good results you’re going to do some damage, or have a bad day. Anyone who’s drilled metal, or used a single point cutting device (lathe, fly cutter) knows that speed and feed is the name of the game. Start on a slower speed, and apply generous pressure, and after a few times you’ll get the feel for it and be able to yield phenomenal results. I’ve used it on mild steel, and stainless, and have had excellent results. I don’t like that you can’t replace the HSS inserts, but I realize for that option you’d end up having to completely redesign the device. Also, the little indented areas where the chips are supposed to collect does get somewhat clogged, but I think this feature is more like a chip breaker, not an area for shavings to reside long term. I ended up using a metal pick I have to clear them, and it worked great. So, moral of the story, if you’re a wood working screw jockey who expects tools to yield to your will you’re going to have difficulty with this cup. But, if you come at it from a machinist perspective, you’ll wonder why you wasted money on the $10 cheapo infomercial style debuting cups.The chamfer I LOVE!! I’ve had issues with the Irwin/harbor freight chamfering tools. This is the solution to your desire to create a chamfer, but again, name of the game is low and slow until you find a good speed and pressure to apply. Be thoughtful, and you’ll love it. Buy once, cry once boys... I know, terrible phrase, but it’s true.
Connor Dion
Reviewed in the United States on March 10, 2021
I never write reviews, but I felt that this thing deserves one considering how much money it saved me. If you’re here then you probably are hard up; having been through the wringer trying to find something locally that will fix your problem with a bolt that can’t be replaced/changed. If so, then this is the tool you need. It “re-threaded” the end of a frame mounted stud on my truck in less than 10 seconds and saved me a ton of cash in the end. It’s high quality, strong and surprisingly durable. Get it!
Brian De Contreras
Reviewed in the United States on December 12, 2020
Works well once you figure out the secret. When I first got this bit I was pretty upset It would chatter like a jackhammer and leave a horrible wavy jagged surface finish on the parts. It took a bit of trial and error to finally figure out that if I set my drill to the slow mode and basically use my whole body weight into the drill I would get very reliably smooth cuts. At that point I was pretty impressed, the surface finish is near mirror like most of the time. The only issue I have found is the small channels that are supposed to curl the chips and eject them sometimes will hold on to the aluminum. this may not be an issue with steel but with aluminum it definitely means a lot of manually clearing those chips with your finger or some sort of pick. I bought this bit specifically to chamfer 5/8 in 6061 aluminum for one of the parts we make, at this point we have done a few hundred of these pins and the bit works like a champ. Quite honestly with a hand drill and our custom soft jaws clamping the pin, chamfering, flipping, and chamfering the other side is so dang quick I'm not quite sure you could chamfer these parts in a manual lathe or mill anywhere as fast as this process. All in all I would recommend this product. But if it doesn't work like intended play around with your drill pressure and speed.
Recommended Products